2026 KTM 690 Enduro R Specifications

Name: 2026 KTM 690 Enduro R
Brand: KTM

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2026 KTM 690 Enduro R Overview

KTM 690 Enduro R is an enduro / off-road motorcycle, displacing 692.7 cc. Power comes from a Single cylinder, 4-stroke, SOHC, 4-valve engine. On the performance side, it delivers 79 hp of peak power and 73 Nm of torque. On the road, the 2026 690 Enduro R tips the scales at 162 kg, carries a 13.3-litre fuel tank, offers a seat height of 935 mm and spans a 1506 mm wheelbase. That's roughly 36 kg lighter than the average enduro / off-road motorcycle in our database. The full 2026 KTM 690 Enduro R spec sheet below covers every technical detail, from suspension travel to tyre sizes.

2026 690 Enduro R - Pros & Cons

Strengths

Strong power output: With 79 hp and 73 Nm of torque on tap, the 690 Enduro R is no slouch for its class.

Considerations

Tall seat height: At 935 mm, shorter riders will likely be on tiptoes at a standstill - worth sitting on one before you buy.
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.

Wear Points & Servicing Notes

Cooling system servicing

690 Enduro R's Liquid cooled setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.

Brake disc and pad wear

Braking up front comes from Single 300 mm disc, Brembo 2 piston floating caliper - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.

Suspension condition on used examples

The 690 Enduro R's suspension runs WP USD XPLOR 48 forks, compression and rebound adjustable at the front. The rear uses WP XPLOR shock absorber with Pro-Lever linkage, preload adjuster. Fork-seal condition and rear linkage play are the two things worth checking before buying used.

Final drive maintenance

The 690 Enduro R uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.

Frame & chassis check

Built around a Chromium-molybdenum-steel trellis frame, powder coated, the 690 Enduro R's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.

690 Enduro R - Buying & Maintenance Guide

What to check before buying

Before handing over money for a used 2026 KTM 690 Enduro R, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy 690 Enduro R should catch quickly and settle into a smooth idle.

Oil and filter changes

Nothing protects a 690 Enduro R's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.

Carburetor upkeep

Deposits in the carbs are the usual culprit behind poor running on a stored 690 Enduro R - strip and clean the float bowls before the first start. Pilot jets clog first and get overlooked most, so make a point of checking them.

2026 KTM 690 Enduro R - Frequently Asked Questions

What engine does the 2026 KTM 690 Enduro R have?

The 2026 KTM 690 Enduro R uses a Single cylinder, 4-stroke, SOHC, 4-valve engine with 692.7 cc of displacement. It is liquid cooled.

How much does the 2026 KTM 690 Enduro R weigh?

The 2026 KTM 690 Enduro R weighs 162 kg. This is the manufacturer's wet figure.

How much power does the 2026 KTM 690 Enduro R make?

The 2026 KTM 690 Enduro R produces 79 hp of power and 73 Nm of torque. These are peak figures.

What is the fuel tank capacity of the 2026 KTM 690 Enduro R?

The 2026 KTM 690 Enduro R has a 13.3-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 221-266 km between stops.

Is the 2026 KTM 690 Enduro R suitable for shorter riders?

The 2026 KTM 690 Enduro R has a seat height of 935 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2026 KTM 690 Enduro R have?

The 2026 KTM 690 Enduro R uses Single 300 mm disc, Brembo 2 piston floating caliper at the front and Single 240 mm disc, Brembo single piston floating caliper at the rear.

What tyre sizes does the 2026 KTM 690 Enduro R use?

The 2026 KTM 690 Enduro R runs 90/90 -21 front and 140/80 -18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2026 KTM 690 Enduro R have?

The 2026 KTM 690 Enduro R is fitted with a 6-Speed transmission.

KTM 690 Enduro R Spec Evolution

The KTM 690 Enduro R was produced across 8 model years (2010-2026). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2010	2012	2013	2014	2016	2019	2020	2026
Max Power	63 hp / 46.kW @ 7500 rpm	63 hp / 46.kW @ 7500 rpm	63 hp / 46.kW @ 7500 rpm	63 hp / 46.kW @ 7500 rpm	49 kW / 67 hp @ 7500 rpm	72 hp / 54 kW @	72 hp / 54 kW @	79 hp / 58.1 kW
Wet Weight	150 kg / 330 lbs	150 kg / 330 lbs	150 kg / 330 lbs	150 kg / 330 lbs	-	-	-	162 kg / 357 lbs
Dry Weight	139 kg / 306 lbs	139 kg / 306 lbs	139 kg / 306 lbs	139 kg / 306 lbs	140 kg / 309 lbs	146 kg / 321.8 lbs	146 kg / 321.8 lbs	-
Engine Detail	Four stroke, single cylinder, SOHC, 4 valves per cylinder	Four stroke, single cylinder, SOHC, 4 valve	Four stroke, single cylinder, SOHC, 4 valve	Four stroke, single cylinder, SOHC, 4 valve	Single cylinder, 4-stroke, SOHC, 4-valve	Single cylinder, 4-stroke, SOHC, 4-valve	Single cylinder, 4-stroke, SOHC, 4-valve	Single cylinder, 4-stroke, SOHC, 4-valve
Seat Height	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	935 mm / 36.8 in
Fuel Capacity	12 Litres / 3.17 US gal	12 Litres / 3.17 US gal	12 Litres / 3.17 US gal	12 Litres / 3.17 US gal	12 Litres / 3.2 US gal	13.5 Litres / 3.5 US gal	13.5 Litres / 3.5 US gal	13.3 Litres / 3.5 US gal
Frame Type	Tubular space frame made from chrome molybdenum steel, powder-coated	Tubular space frame made from chrome molybdenum steel, powder-coated	Tubular space frame made from chrome molybdenum steel, powder-coated	Tubular space frame made from chrome molybdenum steel, powder-coated	Chrome-moly steel trellis frame, powder coated, subframe: self supporting plastic tank	Chromium-molybdenum-steel trellis frame, powder coated	Chromium-molybdenum-steel trellis frame, powder coated	Chromium-molybdenum-steel trellis frame, powder coated
Displacement	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	692.7 cc / 42.27 cu in

Key Specifications

Engine

Single cylinder, 4-stroke, SOHC, 4-valve

Power

79 hp / 58.1 kW

Torque

73 Nm / 54 lb-ft

Top Speed

Not published by manufacturer

Weight

162 kg / 357 lbs

Fuel Capacity

13.3 Litres / 3.5 US gal

Full 2026 KTM 690 Enduro R Specifications

Year 2026

Make Model KTM 690 Enduro R

Seat Height 935 mm / 36.8 in

Wheelbase 1506 mm / 59.3 in

Ground Clearance 265 mm / 10.4 in

Fuel Capacity 13.3 Litres / 3.5 US gal

Wet Weight 162 kg / 357 lbs

Max Power 79 hp / 58.1 kW

Max Torque 73 Nm / 54 lb-ft

Displacement 692.7 cc / 42.27 cu in

Engine Detail Single cylinder, 4-stroke, SOHC, 4-valve

Cooling System Liquid cooled

Exhaust Stainless steel primary and secondary silencer

Fuel Induction Keihin EFI (throttle body 50 mm)

Ignition Keihin EMS with RBW, double ignition

Lubrication System Pressure lubrication with 2 oil pumps

Starter Electric

Clutch PASC slipper clutch, hydraulically operated

Final Drive Chain, 520 X-ring

Transmission / Drive 6-Speed

Frame Type Chromium-molybdenum-steel trellis frame, powder coated

Suspension - Front WP USD XPLOR 48 forks, compression and rebound adjustable

Suspension - Rear WP XPLOR shock absorber with Pro-Lever linkage, preload adjuster

Steering Head Angle 62.3°

Subframe Self-supporting plastic tank

Trail 120 mm / 4.7 in

Wheel Travel - Front 265 mm / 10.4 in

Wheel Travel - Rear 250 mm / 9.8 in

Brakes - Front Single 300 mm disc, Brembo 2 piston floating caliper

Brakes - Rear Single 240 mm disc, Brembo single piston floating caliper

ABS Bosch 9.1 MP (incl. Cornering ABS and offroad mode, disengageable)

Tyres - Front 90/90 -21

Tyres - Rear 140/80 -18

Wheels - Front Spoked wheels with aluminum rims, 1.85 x 21″

Wheels - Rear Spoked wheels with aluminum rims, 2.50 x 18″

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.