2020 KTM 690 Enduro R Specifications

Name: 2020 KTM 690 Enduro R
Brand: KTM

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2020 KTM 690 Enduro R Overview

For 2020, KTM offers the 690 Enduro R as an enduro / off-road motorcycle with 690 cc on tap. The 2020 KTM 690 Enduro R is built around a Single cylinder, 4-stroke, SOHC, 4-valve engine, a compression ratio of 12.7:1. Out on the road, the 690 Enduro R delivers 72 hp of peak power and 73.5 Nm @ 6500 rpm of torque. In everyday use, the 2020 690 Enduro R tips the scales at 146 kg, carries a 13.5-litre fuel tank, offers a seat height of 910 mm and spans a 1502 mm wheelbase. That's roughly 52 kg lighter than the average enduro / off-road motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2020 KTM 690 Enduro R spec sheet below.

2020 690 Enduro R - Pros & Cons

Strengths

Strong power output: Peak output on the 690 Enduro R is 72 hp and 73.5 Nm @ 6500 rpm of torque - strong numbers for what it is.

Considerations

Tall seat height: A 910 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Cooling system servicing

With Liquid cooled, thermal management is largely automatic, but the coolant has a service life of its own - replace it on the manufacturer's interval to protect the water passages and thermostat.

Brake disc and pad wear

Single 300 mm disc, Brembo 2 piston floating caliper up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by WP USD XPLOR 48 forks up front and WP shock absorber with Pro-Lever linkage at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the 690 Enduro R means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Chromium-molybdenum-steel trellis frame, powder coated chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

690 Enduro R - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2020 KTM 690 Enduro R should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept 690 Enduro R settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a 690 Enduro R's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Carburetor upkeep

A 690 Enduro R that's sat unused is almost always a carb-cleaning job before it runs right again - float bowls and pilot jets first, since they clog before anything else.

2020 KTM 690 Enduro R - Frequently Asked Questions

What engine does the 2020 KTM 690 Enduro R have?

The 2020 KTM 690 Enduro R uses a Single cylinder, 4-stroke, SOHC, 4-valve engine with 690 cc of displacement. It is liquid cooled.

How much does the 2020 KTM 690 Enduro R weigh?

The 2020 KTM 690 Enduro R weighs 146 kg. This is the manufacturer's dry figure.

How much power does the 2020 KTM 690 Enduro R make?

The 2020 KTM 690 Enduro R produces 72 hp of power and 73.5 Nm @ 6500 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 2020 KTM 690 Enduro R?

The 2020 KTM 690 Enduro R has a 13.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 225-270 km between stops.

Is the 2020 KTM 690 Enduro R suitable for shorter riders?

The 2020 KTM 690 Enduro R has a seat height of 910 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2020 KTM 690 Enduro R have?

The 2020 KTM 690 Enduro R uses Single 300 mm disc, Brembo 2 piston floating caliper at the front and Single 240 mm disc, Brembo single piston floating caliper at the rear.

What tyre sizes does the 2020 KTM 690 Enduro R use?

The 2020 KTM 690 Enduro R runs 90/90 -21 front and 140/80 -18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2020 KTM 690 Enduro R have?

The 2020 KTM 690 Enduro R is fitted with a 6-Speed transmission.

KTM 690 Enduro R Spec Evolution

The KTM 690 Enduro R was produced across 8 model years (2010-2026). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2010	2012	2013	2014	2016	2019	2020	2026
Max Power	63 hp / 46.kW @ 7500 rpm	63 hp / 46.kW @ 7500 rpm	63 hp / 46.kW @ 7500 rpm	63 hp / 46.kW @ 7500 rpm	49 kW / 67 hp @ 7500 rpm	72 hp / 54 kW @	72 hp / 54 kW @	79 hp / 58.1 kW
Wet Weight	150 kg / 330 lbs	150 kg / 330 lbs	150 kg / 330 lbs	150 kg / 330 lbs	-	-	-	162 kg / 357 lbs
Dry Weight	139 kg / 306 lbs	139 kg / 306 lbs	139 kg / 306 lbs	139 kg / 306 lbs	140 kg / 309 lbs	146 kg / 321.8 lbs	146 kg / 321.8 lbs	-
Engine Detail	Four stroke, single cylinder, SOHC, 4 valves per cylinder	Four stroke, single cylinder, SOHC, 4 valve	Four stroke, single cylinder, SOHC, 4 valve	Four stroke, single cylinder, SOHC, 4 valve	Single cylinder, 4-stroke, SOHC, 4-valve	Single cylinder, 4-stroke, SOHC, 4-valve	Single cylinder, 4-stroke, SOHC, 4-valve	Single cylinder, 4-stroke, SOHC, 4-valve
Seat Height	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	910 mm / 35.8 in	935 mm / 36.8 in
Fuel Capacity	12 Litres / 3.17 US gal	12 Litres / 3.17 US gal	12 Litres / 3.17 US gal	12 Litres / 3.17 US gal	12 Litres / 3.2 US gal	13.5 Litres / 3.5 US gal	13.5 Litres / 3.5 US gal	13.3 Litres / 3.5 US gal
Frame Type	Tubular space frame made from chrome molybdenum steel, powder-coated	Tubular space frame made from chrome molybdenum steel, powder-coated	Tubular space frame made from chrome molybdenum steel, powder-coated	Tubular space frame made from chrome molybdenum steel, powder-coated	Chrome-moly steel trellis frame, powder coated, subframe: self supporting plastic tank	Chromium-molybdenum-steel trellis frame, powder coated	Chromium-molybdenum-steel trellis frame, powder coated	Chromium-molybdenum-steel trellis frame, powder coated
Displacement	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	690 cc / 42.1 cu in	692.7 cc / 42.27 cu in

Key Specifications

Engine

Single cylinder, 4-stroke, SOHC, 4-valve

Power

72 hp / 54 kW @

Torque

73.5 Nm / 54 lb-ft @ 6500 rpm

Top Speed

Not published by manufacturer

Weight

146 kg / 321.8 lbs

Fuel Capacity

13.5 Litres / 3.5 US gal

Full 2020 KTM 690 Enduro R Specifications

Year 2020

Make Model KTM 690 Enduro R

Seat Height 910 mm / 35.8 in

Wheelbase 1502 mm / 59.1 in

Ground Clearance 270 mm / 10.6 in

Dry Weight 146 kg / 321.8 lbs

Fuel Capacity 13.5 Litres / 3.5 US gal

Max Power 72 hp / 54 kW @

Max Torque 73.5 Nm / 54 lb-ft @ 6500 rpm

Displacement 690 cc / 42.1 cu in

Engine Detail Single cylinder, 4-stroke, SOHC, 4-valve

Bore x Stroke 105 x 80 mm

Compression Ratio 12.7:1

Cooling System Liquid cooled

Exhaust Stainless steel primary and secondary silencer

Fuel Induction Keihin EFI (throttle body 50 mm)

Ignition Keihin EMS with RBW, double ignition

Lubrication System Pressure lubrication with 2 oil pumps

Starter Electric

Battery Capacity Lithium Ion 12V 8,6Ah

Clutch PASC slipper clutch, hydraulically operated

Final Drive Chain, 16:40

Primary Drive 36:79

Transmission / Drive 6-Speed

Frame Type Chromium-molybdenum-steel trellis frame, powder coated

Suspension - Front WP USD XPLOR 48 forks

Suspension - Rear WP shock absorber with Pro-Lever linkage

Handlebar Aluminum, tapered, Ø 28 / 22 mm

Steering Head Angle 62.3°

Subframe Self-supporting plastic tank

Trail 117.3 mm / 4.6 in

Wheel Travel - Front 250 mm / 9.8 in

Wheel Travel - Rear 250 mm / 9.8 in

Brakes - Front Single 300 mm disc, Brembo 2 piston floating caliper

Brakes - Rear Single 240 mm disc, Brembo single piston floating caliper

ABS Bosch 9.1 MP (incl. Cornering ABS and offroad mode, disengageable)

Tyres - Front 90/90 -21

Tyres - Rear 140/80 -18

Wheels - Front Spoked wheels with aluminum rims, 1.85 x 21″

Wheels - Rear Spoked wheels with aluminum rims, 2.50 x 18″

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.