2019 Honda CBR 1000RR Fireblade Specifications

Name: 2019 Honda CBR 1000RR Fireblade
Brand: Honda

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2019 Honda CBR 1000RR Fireblade Overview

The 2019 Honda CBR 1000RR Fireblade is a sport motorcycle built around 999 cc of displacement. Under the tank sits a Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder engine, a compression ratio of 13.0:1. 2019 Honda CBR 1000RR Fireblade delivers 141 kW @ 13000rpm of peak power and 114 Nm @ 11000 rpm of torque. From a practical standpoint, the 2019 CBR 1000RR Fireblade tips the scales at 195 kg, carries a 16-litre fuel tank, offers a seat height of 8352 mm and spans a 1405 mm wheelbase. Scroll down for the complete 2019 Honda CBR 1000RR Fireblade spec sheet covering every technical detail from suspension travel to tyre sizes.

2019 Honda CBR 1000RR Fireblade compared with other bikes in the Sport category

Here is how the 2019 Honda CBR 1000RR Fireblade stacks up against other bikes in the Sport category in our database. Each model counts once, using the model year closest to this one, and the comparison covers up to 1573 models.

Power output of 141 kW is higher than that of 1217 of the other 1340 bikes in the Sport category.
Only 80 of the other 726 bikes in the Sport category have a higher power-to-weight ratio than the 723 W/kg of the CBR 1000RR Fireblade.
With 114 Nm, the CBR 1000RR Fireblade has the joint 295th highest torque of 1573 bikes in the Sport category, 50% above the category average of 75.8 Nm.
Narrowing the field to the 364 models within five model years of it, the power output of 141 kW is higher than that of 274 of the other 363.

Versus the 2018 model

Compared with the 2018 model, wet weight dropped from 196 kg to 195 kg (-1 kg). Peak power, peak torque and displacement are unchanged.

2019 CBR 1000RR Fireblade - Pros & Cons

Strengths

Strong power output: 2019 Honda CBR 1000RR Fireblade makes 141 kW @ 13000rpm with 114 Nm @ 11000 rpm of torque - competitive figures for its class.
Strong front braking: The disc front brake gives excellent stopping power and responds well to aftermarket braided lines.

Considerations

Tall seat height: The 8352 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.

Wear Points & Servicing Notes

Cooling system servicing

The Liquid cooling system on the CBR 1000RR Fireblade needs a coolant change roughly every two years (or per the service schedule) - skipping it lets the coolant turn acidic and corrode the aluminium water passages over time.

Brake disc and pad wear

The disc front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Suspension condition on used examples

Up front, the CBR 1000RR Fireblade runs Telescopic inverted fork with an inner tube diameter of 43 mm, and a Big Piston Front Fork with preload, compression and rebound adjustment and Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.

Frame & chassis check

The frame is Diamond; aluminium composite twin spar - worth a visual check for corrosion or impact damage around the head-stock and swingarm pivot on any used example, since frame damage is far costlier to fix than any service item.

CBR 1000RR Fireblade - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2019 Honda CBR 1000RR Fireblade with its 999 cc sport, start with the basics: check the service book for oil change frequency, inspect the drivetrain for wear, and look for oil seepage around the engine casings and rocker covers. This model runs chain final drive, so check chain slack and sprocket tooth profile specifically - a worn sprocket is a cheaper fix now than after it's chewed up the next chain. Now 7 years old, this sport is as likely to show age-related wear (perished rubber, seized fasteners, degraded seals) as mileage-related wear. A cold start test is invaluable - a well-maintained CBR 1000RR Fireblade should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task for the CBR 1000RR Fireblade's 999 cc four stroke, transverse four cylinder, chain-driven dohc, 4 valve per cylinder.. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. With a 13.0:1 compression ratio, running the octane grade specified in the manual matters more than on a lower-compression engine. Always use the correct viscosity grade as specified in the owner's manual.

Carburetor upkeep

Keep the carburetors clean and free of deposits. If the CBR 1000RR Fireblade has been stored, strip and clean the carb float bowls before attempting to start it. Pilot jets are the first to block and the last to be checked - always include them in any carb rebuild.

2019 Honda CBR 1000RR Fireblade - Frequently Asked Questions

What engine does the 2019 Honda CBR 1000RR Fireblade have?

The 2019 Honda CBR 1000RR Fireblade uses a Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder. engine with 999 cc of displacement. It is liquid cooling.

How much does the 2019 Honda CBR 1000RR Fireblade weigh?

The 2019 Honda CBR 1000RR Fireblade weighs 195 kg. This is the manufacturer's wet figure.

How much power does the 2019 Honda CBR 1000RR Fireblade make?

The 2019 Honda CBR 1000RR Fireblade produces 141 kW @ 13000rpm of power and 114 Nm @ 11000 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 2019 Honda CBR 1000RR Fireblade?

The 2019 Honda CBR 1000RR Fireblade has a 16-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 266-320 km between stops.

Is the 2019 Honda CBR 1000RR Fireblade suitable for shorter riders?

The 2019 Honda CBR 1000RR Fireblade has a seat height of 8352 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2019 Honda CBR 1000RR Fireblade have?

The 2019 Honda CBR 1000RR Fireblade uses 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear at the front and single 220mm disc, Combined ABS and sintered metal pads at the rear.

What tyre sizes does the 2019 Honda CBR 1000RR Fireblade use?

The 2019 Honda CBR 1000RR Fireblade runs 120/70ZR17 58W front and 190/50ZR17 73W rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2019 Honda CBR 1000RR Fireblade have?

The 2019 Honda CBR 1000RR Fireblade is fitted with a Close-ratio six-speed transmission.

Honda CBR 1000RR Fireblade Spec Evolution

The Honda CBR 1000RR Fireblade was produced across 7 model years (2005-2019). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2005	2006	2013	2016	2017	2018	2019
Max Power	126,4 kW / 172 hp @ 11250 rpm	126,4 kW /172 hp @ 11250 rpm	175.6 hp / 131.0 kW @ 12000 rpm	133 kW / 178 hp @ 12250rpm	141 kW / 189 hp @ 13000rpm	141 kW / 189 hp @ 13000rpm	141 kW / 189 hp @ 13000rpm
Wet Weight	205 kg / 450 lbs	202 kg / 445 lbs	195 kg / 430 lbs (209 kg / 461.7 lbs C-ABS)	201 kg / 444 lbs	196 kg / 432 lbs	196 kg / 432 lbs	195 kg / 430 lbs
Dry Weight	179 kg / 394.6 lbs	176 kg / 388 lbs	173 kg / 381.3 lbs	-	-	-	-
Engine Detail	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.
Top Speed	284.3 km/h / 176.6 mph	277.7 km/h	287.1 km/h / 178.3 mph	-	-	-	-
Seat Height	828 mm / 32.3 in	828 mm / 32.3 in	820 mm / 32.3 in	817.8 mm / 32.2 in	8352 mm / 32.7 in	8352 mm / 32.7 in	8352 mm / 32.7 in
Fuel Capacity	18 Litres / 4.8 gal	18 Litres / 4.8 gal	17.7 Liters / 4.7 gal	19.3 Liters / 4.4 gal	16 Litres / 4.2 US gal	16 Litres / 4.2 US gal	16 Litres / 4.2 US gal
Frame Type	Aluminium, twin spar	Aluminium, twin spar	Diamond; aluminium composite twin-spar	Diamond; aluminium composite twin-spar	Diamond; aluminium composite twin spar	Diamond; aluminium composite twin spar	Diamond; aluminium composite twin spar

Key Specifications

Engine

Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.

Power

141 kW / 189 hp @ 13000rpm

Torque

114 Nm / 84.1 lb-ft @ 11000 rpm

Top Speed

Not recorded

Weight

195 kg / 430 lbs

Fuel Capacity

16 Litres / 4.2 US gal

Full 2019 Honda CBR 1000RR Fireblade Specifications

Year 2019

Make Model Honda CBR 1000RR Fireblade

Seat Height 8352 mm / 32.7 in

Wheelbase 1405 mm / 55.3 in

Height 1125 mm / 44.7 in

Length 2005 mm / 81.7 in

Width 720 mm / 32.3 in

Fuel Capacity 16 Litres / 4.2 US gal

Wet Weight 195 kg / 430 lbs

Max Power 141 kW / 189 hp @ 13000rpm

Max Torque 114 Nm / 84.1 lb-ft @ 11000 rpm

Displacement 999 cc / 60.9 in cc / 60.9 cu-in

Engine Detail Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.

Bore x Stroke 76 x 55.1 mm

Compression Ratio 13.0:1

Cooling System Liquid cooling

Fuel Induction PGM-FI; 48mm throttle bodies

Ignition Digital transistorized w/ electronic advance

Lubrication Wet sump

Starter Electric

Clutch Wet, multiplate with diaphragm spring

Final Drive 16T/43T; chain

Transmission / Drive Close-ratio six-speed (Quickshifter - optional accessory)

Frame Type Diamond; aluminium composite twin spar

Suspension - Front Telescopic inverted fork with an inner tube diameter of 43 mm, and a Big Piston Front Fork with preload, compression and rebound adjustment

Suspension - Rear Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment

Rake 23°2

Trail 96.2 mm / 3.8 in

Wheel Travel - Front 120 mm / 4.7 in

Wheel Travel - Rear 132 mm / 5.2 in

Brakes - Front 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear.

Brakes - Rear Single 220mm disc, Combined ABS and sintered metal pads

ABS Electronically controlled ABS

Tyres - Front 120/70ZR17 58W

Tyres - Rear 190/50ZR17 73W

Wheels - Front 17 x MT3.50

Wheels - Rear 17 x MT6.00

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.