2018 Honda CBR 1000RR Fireblade Specifications

Name: 2018 Honda CBR 1000RR Fireblade
Brand: Honda

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2018 Honda CBR 1000RR Fireblade Overview

For 2018, Honda offers the CBR 1000RR Fireblade as a sport motorcycle with 999 cc on tap. The 2018 Honda CBR 1000RR Fireblade is built around a Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder engine, a compression ratio of 13.0:1. Out on the road, the CBR 1000RR Fireblade delivers 141 kW @ 13000rpm of peak power and 114 Nm @ 11000 rpm of torque. In everyday use, the 2018 CBR 1000RR Fireblade tips the scales at 196 kg, carries a 16-litre fuel tank, offers a seat height of 8352 mm and spans a 1405 mm wheelbase. That's roughly 6.7 kg lighter than the average sport motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2018 Honda CBR 1000RR Fireblade spec sheet below.

2018 CBR 1000RR Fireblade - Pros & Cons

Strengths

Strong power output: Peak output on the CBR 1000RR Fireblade is 141 kW @ 13000rpm and 114 Nm @ 11000 rpm of torque - strong numbers for what it is.
Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.

Considerations

Tall seat height: A 8352 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Cooling system servicing

With Liquid cooling, thermal management is largely automatic, but the coolant has a service life of its own - replace it on the manufacturer's interval to protect the water passages and thermostat.

Fuelling & injector care

Fuelling on the CBR 1000RR Fireblade comes from PGM Ø Dual Stage Fuel Injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.

Brake disc and pad wear

2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear. up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by Telescopic inverted fork with an inner tube diameter of 43 mm, and a Big Piston Front Fork with preload, compression and rebound adjustment up front and Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the CBR 1000RR Fireblade means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Diamond; aluminium composite twin spar chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

CBR 1000RR Fireblade - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2018 Honda CBR 1000RR Fireblade should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept CBR 1000RR Fireblade settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a CBR 1000RR Fireblade's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Fuel system care

Injector systems like the CBR 1000RR Fireblade's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.

2018 Honda CBR 1000RR Fireblade - Frequently Asked Questions

What engine does the 2018 Honda CBR 1000RR Fireblade have?

The 2018 Honda CBR 1000RR Fireblade uses a Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder. engine with 999 cc of displacement. It is liquid cooling.

How much does the 2018 Honda CBR 1000RR Fireblade weigh?

The 2018 Honda CBR 1000RR Fireblade weighs 196 kg. This is the manufacturer's wet figure.

How much power does the 2018 Honda CBR 1000RR Fireblade make?

The 2018 Honda CBR 1000RR Fireblade produces 141 kW @ 13000rpm of power and 114 Nm @ 11000 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 2018 Honda CBR 1000RR Fireblade?

The 2018 Honda CBR 1000RR Fireblade has a 16-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 266-320 km between stops.

Is the 2018 Honda CBR 1000RR Fireblade suitable for shorter riders?

The 2018 Honda CBR 1000RR Fireblade has a seat height of 8352 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2018 Honda CBR 1000RR Fireblade have?

The 2018 Honda CBR 1000RR Fireblade uses 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear. at the front and Single 220mm disc, Combined ABS and sintered metal pads at the rear.

What tyre sizes does the 2018 Honda CBR 1000RR Fireblade use?

The 2018 Honda CBR 1000RR Fireblade runs 120/70ZR17 58W front and 190/50ZR17 73W rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2018 Honda CBR 1000RR Fireblade have?

The 2018 Honda CBR 1000RR Fireblade is fitted with a Close-ratio six-speed transmission.

Honda CBR 1000RR Fireblade Spec Evolution

The Honda CBR 1000RR Fireblade was produced across 7 model years (2005-2019). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2005	2006	2013	2016	2017	2018	2019
Max Power	126,4 kW / 172 hp @ 11250 rpm	126,4 kW /172 hp @ 11250 rpm	175.6 hp / 131.0 kW @ 12000 rpm	133 kW / 178 hp @ 12250rpm	141 kW / 189 hp @ 13000rpm	141 kW / 189 hp @ 13000rpm	141 kW / 189 hp @ 13000rpm
Wet Weight	205 kg / 450 lbs	202 kg / 445 lbs	195 kg / 430 lbs (209 kg / 461.7 lbs C-ABS)	201 kg / 444 lbs	196 kg / 432 lbs	196 kg / 432 lbs	195 kg / 430 lbs
Dry Weight	179 kg / 394.6 lbs	176 kg / 388 lbs	173 kg / 381.3 lbs	-	-	-	-
Engine Detail	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.
Top Speed	284.3 km/h / 176.6 mph	277.7 km/h	287.1 km/h / 178.3 mph	-	-	-	-
Seat Height	828 mm / 32.3 in	828 mm / 32.3 in	820 mm / 32.3 in	817.8 mm / 32.2 in	8352 mm / 32.7 in	8352 mm / 32.7 in	8352 mm / 32.7 in
Fuel Capacity	18 Litres / 4.8 gal	18 Litres / 4.8 gal	17.7 Liters / 4.7 gal	19.3 Liters / 4.4 gal	16 Litres / 4.2 US gal	16 Litres / 4.2 US gal	16 Litres / 4.2 US gal
Frame Type	Aluminium, twin spar	Aluminium, twin spar	Diamond; aluminium composite twin-spar	Diamond; aluminium composite twin-spar	Diamond; aluminium composite twin spar	Diamond; aluminium composite twin spar	Diamond; aluminium composite twin spar

Key Specifications

Engine

Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.

Power

141 kW / 189 hp @ 13000rpm

Torque

114 Nm / 84.1 lb-ft @ 11000 rpm

Top Speed

Not published by manufacturer

Weight

196 kg / 432 lbs

Fuel Capacity

16 Litres / 4.2 US gal

Full 2018 Honda CBR 1000RR Fireblade Specifications

Year 2018

Make Model Honda CBR 1000RR Fireblade

Seat Height 8352 mm / 32.7 in

Wheelbase 1405 mm / 55.3 in

Height 1125 mm / 44.7 in

Length 2005 mm / 81.7 in

Width 720 mm / 32.3 in

Fuel Capacity 16 Litres / 4.2 US gal

Wet Weight 196 kg / 432 lbs

Max Power 141 kW / 189 hp @ 13000rpm

Max Torque 114 Nm / 84.1 lb-ft @ 11000 rpm

Displacement 999 cc / 60.9 in cc / 60.9 cu-in

Engine Detail Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.

Bore x Stroke 76 x 55.1 mm

Compression Ratio 13.0:1

Cooling System Liquid cooling

Fuel Induction PGM Ø Dual Stage Fuel Injection

Ignition Computer-controlled digital transistorized with 3-D mapping

Lubrication Wet sump

Starter Electric

Clutch Wet, multiplate with diaphragm spring

Final Drive #530 O-ring-sealed chain

Transmission / Drive Close-ratio six-speed (Quickshifter - optional accessory)

Frame Type Diamond; aluminium composite twin spar

Suspension - Front Telescopic inverted fork with an inner tube diameter of 43 mm, and a Big Piston Front Fork with preload, compression and rebound adjustment

Suspension - Rear Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment

Rake 23°2

Trail 96.2 mm / 3.8 in

Wheel Travel - Front 125 mm / 4.9 in

Wheel Travel - Rear 138 mm / 5.4 in

Brakes - Front 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear.

Brakes - Rear Single 220mm disc, Combined ABS and sintered metal pads

ABS Electronically controlled ABS

Tyres - Front 120/70ZR17 58W

Tyres - Rear 190/50ZR17 73W

Wheels - Front 17 x MT3.50

Wheels - Rear 17 x MT6.00

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.