2017 Honda CBR 1000RR Fireblade Specifications

Name: 2017 Honda CBR 1000RR Fireblade
Brand: Honda

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2017 Honda CBR 1000RR Fireblade Overview

Honda CBR 1000RR Fireblade is a sport motorcycle, displacing 999 cc. Power comes from a Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder engine, a compression ratio of 13.0:1. On the performance side, it delivers 141 kW @ 13000rpm of peak power and 114 Nm @ 11000 rpm of torque. On the road, the 2017 CBR 1000RR Fireblade tips the scales at 196 kg, carries a 16-litre fuel tank, offers a seat height of 8352 mm and spans a 1405 mm wheelbase. That's roughly 6.7 kg lighter than the average sport motorcycle in our database. The full 2017 Honda CBR 1000RR Fireblade spec sheet below covers every technical detail, from suspension travel to tyre sizes.

2017 CBR 1000RR Fireblade - Pros & Cons

Strengths

Strong power output: With 141 kW @ 13000rpm and 114 Nm @ 11000 rpm of torque on tap, the CBR 1000RR Fireblade is no slouch for its class.
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.

Considerations

Tall seat height: At 8352 mm, shorter riders will likely be on tiptoes at a standstill - worth sitting on one before you buy.
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.

Wear Points & Servicing Notes

Cooling system servicing

CBR 1000RR Fireblade's Liquid cooling setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.

Fuelling & injector care

The PGM Ø Dual Stage Fuel Injection on the CBR 1000RR Fireblade needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.

Brake disc and pad wear

Braking up front comes from 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear. - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.

Suspension condition on used examples

The CBR 1000RR Fireblade's suspension runs Telescopic inverted fork with an inner tube diameter of 43 mm, and a Big Piston Front Fork with preload, compression and rebound adjustment at the front. The rear uses Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment. Fork-seal condition and rear linkage play are the two things worth checking before buying used.

Final drive maintenance

The CBR 1000RR Fireblade uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.

Frame & chassis check

Built around a Diamond; aluminium composite twin spar, the CBR 1000RR Fireblade's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.

CBR 1000RR Fireblade - Buying & Maintenance Guide

What to check before buying

Before handing over money for a used 2017 Honda CBR 1000RR Fireblade, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy CBR 1000RR Fireblade should catch quickly and settle into a smooth idle.

Oil and filter changes

Nothing protects a CBR 1000RR Fireblade's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.

Fuel system care

Fuel injection on the CBR 1000RR Fireblade needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.

2017 Honda CBR 1000RR Fireblade - Frequently Asked Questions

What engine does the 2017 Honda CBR 1000RR Fireblade have?

The 2017 Honda CBR 1000RR Fireblade uses a Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder. engine with 999 cc of displacement. It is liquid cooling.

How much does the 2017 Honda CBR 1000RR Fireblade weigh?

The 2017 Honda CBR 1000RR Fireblade weighs 196 kg. This is the manufacturer's wet figure.

How much power does the 2017 Honda CBR 1000RR Fireblade make?

The 2017 Honda CBR 1000RR Fireblade produces 141 kW @ 13000rpm of power and 114 Nm @ 11000 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 2017 Honda CBR 1000RR Fireblade?

The 2017 Honda CBR 1000RR Fireblade has a 16-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 266-320 km between stops.

Is the 2017 Honda CBR 1000RR Fireblade suitable for shorter riders?

The 2017 Honda CBR 1000RR Fireblade has a seat height of 8352 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2017 Honda CBR 1000RR Fireblade have?

The 2017 Honda CBR 1000RR Fireblade uses 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear. at the front and Single 220mm disc, Combined ABS and sintered metal pads at the rear.

What tyre sizes does the 2017 Honda CBR 1000RR Fireblade use?

The 2017 Honda CBR 1000RR Fireblade runs 120/70ZR17 58W front and 190/50ZR17 73W rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2017 Honda CBR 1000RR Fireblade have?

The 2017 Honda CBR 1000RR Fireblade is fitted with a Close-ratio six-speed transmission.

Honda CBR 1000RR Fireblade Spec Evolution

The Honda CBR 1000RR Fireblade was produced across 7 model years (2005-2019). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2005	2006	2013	2016	2017	2018	2019
Max Power	126,4 kW / 172 hp @ 11250 rpm	126,4 kW /172 hp @ 11250 rpm	175.6 hp / 131.0 kW @ 12000 rpm	133 kW / 178 hp @ 12250rpm	141 kW / 189 hp @ 13000rpm	141 kW / 189 hp @ 13000rpm	141 kW / 189 hp @ 13000rpm
Wet Weight	205 kg / 450 lbs	202 kg / 445 lbs	195 kg / 430 lbs (209 kg / 461.7 lbs C-ABS)	201 kg / 444 lbs	196 kg / 432 lbs	196 kg / 432 lbs	195 kg / 430 lbs
Dry Weight	179 kg / 394.6 lbs	176 kg / 388 lbs	173 kg / 381.3 lbs	-	-	-	-
Engine Detail	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.
Top Speed	284.3 km/h / 176.6 mph	277.7 km/h	287.1 km/h / 178.3 mph	-	-	-	-
Seat Height	828 mm / 32.3 in	828 mm / 32.3 in	820 mm / 32.3 in	817.8 mm / 32.2 in	8352 mm / 32.7 in	8352 mm / 32.7 in	8352 mm / 32.7 in
Fuel Capacity	18 Litres / 4.8 gal	18 Litres / 4.8 gal	17.7 Liters / 4.7 gal	19.3 Liters / 4.4 gal	16 Litres / 4.2 US gal	16 Litres / 4.2 US gal	16 Litres / 4.2 US gal
Frame Type	Aluminium, twin spar	Aluminium, twin spar	Diamond; aluminium composite twin-spar	Diamond; aluminium composite twin-spar	Diamond; aluminium composite twin spar	Diamond; aluminium composite twin spar	Diamond; aluminium composite twin spar

Key Specifications

Engine

Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.

Power

141 kW / 189 hp @ 13000rpm

Torque

114 Nm / 84.1 lb-ft @ 11000 rpm

Top Speed

Not published by manufacturer

Weight

196 kg / 432 lbs

Fuel Capacity

16 Litres / 4.2 US gal

Full 2017 Honda CBR 1000RR Fireblade Specifications

Year 2017

Make Model Honda CBR 1000RR Fireblade

Seat Height 8352 mm / 32.7 in

Wheelbase 1405 mm / 55.3 in

Height 1125 mm / 44.7 in

Length 205 mm / 81.7 in

Width 720 mm / 32.3 in

Fuel Capacity 16 Litres / 4.2 US gal

Wet Weight 196 kg / 432 lbs

Max Power 141 kW / 189 hp @ 13000rpm

Max Torque 114 Nm / 84.1 lb-ft @ 11000 rpm

Displacement 999 cc / 60.9 in cc / 60.9 cu-in

Engine Detail Four stroke, transverse four cylinder, Chain-driven DOHC, 4 valve per cylinder.

Bore x Stroke 76 x 55.1 mm

Compression Ratio 13.0:1

Cooling System Liquid cooling

Fuel Induction PGM Ø Dual Stage Fuel Injection

Ignition Computer-controlled digital transistorized with 3-D mapping

Lubrication Wet sump

Starter Electric

Clutch Wet, multiplate with diaphragm spring

Final Drive #530 O-ring-sealed chain

Transmission / Drive Close-ratio six-speed (Quickshifter - optional accessory)

Frame Type Diamond; aluminium composite twin spar

Suspension - Front Telescopic inverted fork with an inner tube diameter of 43 mm, and a Big Piston Front Fork with preload, compression and rebound adjustment

Suspension - Rear Unit Pro-Link with gas-charged HMAS damper featuring 10-step preload and stepless compression and rebound damping adjustment

Rake 23°2

Trail 96.2 mm / 3.8 in

Wheel Travel - Front 125 mm / 4.9 in

Wheel Travel - Rear 138 mm / 5.4 in

Brakes - Front 2x 320 mm hydraulic disc with Tokico radial mounted calipers and high performance track ready pads Rear.

Brakes - Rear Single 220mm disc, Combined ABS and sintered metal pads

ABS Electronically controlled ABS

Tyres - Front 120/70ZR17 58W

Tyres - Rear 190/50ZR17 73W

Wheels - Front 17 x MT3.50

Wheels - Rear 17 x MT6.00

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.