2010 Honda CBR 600RR Specifications

Name: 2010 Honda CBR 600RR
Brand: Honda

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2010 Honda CBR 600RR Overview

For 2010, Honda offers the CBR 600RR as a sport motorcycle with 599 cc on tap. The 2010 Honda CBR 600RR is built around an In-line four, four-stroke engine running DOHC valve actuation, a compression ratio of 12.2:1. Out on the road, the CBR 600RR delivers 118 hp @ 13500 rpm of peak power and 66 Nm @ 11250 rpm of torque. Flat out, it's quoted at 255.3 km/h. In everyday use, the 2010 CBR 600RR tips the scales at 186 kg, carries a 18.2-litre fuel tank, offers a seat height of 820 mm and spans a 1369 mm wheelbase. That's roughly 16.7 kg lighter than the average sport motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2010 Honda CBR 600RR spec sheet below.

2010 CBR 600RR - Pros & Cons

Strengths

Strong power output: Peak output on the CBR 600RR is 118 hp @ 13500 rpm and 66 Nm @ 11250 rpm of torque - strong numbers for what it is.
Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.
Large fuel range: With a 18.2-litre tank, this isn't a bike you'll be stopping for fuel every hour - a real asset on longer trips.

Considerations

Tall seat height: A 820 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Cooling system servicing

With Liquid cooled, thermal management is largely automatic, but the coolant has a service life of its own - replace it on the manufacturer's interval to protect the water passages and thermostat.

Fuelling & injector care

Fuelling on the CBR 600RR comes from Dual Stage Fuel Injection (DSFI) with 40mm throttle bodies. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.

Valve clearance checks

Valve clearances on DOHC-equipped engines like the CBR 600RR's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.

Brake disc and pad wear

2x 310mm discs 4 piston calipers up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by 41mm inverted Big Piston Fork with spring preload, rebound and compression damping adjustability up front and Unit Pro-Link HMAS single shock with spring preload, rebound and compression damping adjustability; at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the CBR 600RR means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Aluminium, twin spar chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

CBR 600RR - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2010 Honda CBR 600RR should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept CBR 600RR settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a CBR 600RR's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Fuel system care

Injector systems like the CBR 600RR's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.

Valve clearance service

There's no reliable seat-of-the-pants way to tell if a CBR 600RR's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.

2010 Honda CBR 600RR - Frequently Asked Questions

What engine does the 2010 Honda CBR 600RR have?

The 2010 Honda CBR 600RR uses an In-line four, four-stroke engine with 599 cc of displacement. It is liquid cooled.

What is the top speed of the 2010 Honda CBR 600RR?

The 2010 Honda CBR 600RR has a factory-quoted top speed of 255.3 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.

How much does the 2010 Honda CBR 600RR weigh?

The 2010 Honda CBR 600RR weighs 186 kg. This is the manufacturer's wet figure.

How much power does the 2010 Honda CBR 600RR make?

The 2010 Honda CBR 600RR produces 118 hp @ 13500 rpm of power and 66 Nm @ 11250 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 2010 Honda CBR 600RR?

The 2010 Honda CBR 600RR has a 18.2-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 303-363 km between stops.

Is the 2010 Honda CBR 600RR suitable for shorter riders?

The 2010 Honda CBR 600RR has a seat height of 820 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2010 Honda CBR 600RR have?

The 2010 Honda CBR 600RR uses 2x 310mm discs 4 piston calipers at the front and Single 220mm disc 1 piston caliper at the rear.

What tyre sizes does the 2010 Honda CBR 600RR use?

The 2010 Honda CBR 600RR runs 120/70 ZR17 front and 180/55 ZR17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2010 Honda CBR 600RR have?

The 2010 Honda CBR 600RR is fitted with a Close-ratio 6 Speed transmission.

Honda CBR 600RR Spec Evolution

The Honda CBR 600RR was produced across 21 model years (2003-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2003	2004	2005	2006	2007	2008	2009	2010	2011	2012	2013	2014	2015	2016	2017	2018	2019	2020	2021	2022	2023
Wet Weight	-	-	-	-	-	186 kg / 410 lbs	186.0 kg / 410.0 lbs	186 kg / 410 lbs	186 kg / 410 lbs	186.0 kg / 410.0 lbs	186 kg / 410 lbs	186 kg / 410 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186 kg / 410 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs	186.0 kg / 410.0 lbs
Dry Weight	169 kg / 372.6 lbs	-	163.7 kg / 361.0 lbs	163.7 kg / 361.0 lbs	156.5 kg / 345.0 lbs	156.5 kg / 345.0 lbs	-	156.5 kg / 345.0 lbs	156.5 kg / 345.0 lbs	310 kg / 683.4 lbs	156.5 kg / 345.0 lbs	156.5 kg / 345.0 lbs	-	-	-	-	-	156.5 kg / 345 lbs	-	-	-
Engine Detail	-	-	-	-	-	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	-	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	-	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder	-	-	-	-	-	Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.	-	-	-
Engine Type	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke	-	In-line four, four-stroke	In-line four, four-stroke	In-line four, four-stroke
Top Speed	-	-	-	-	-	255.3 km/h / 158.6 mph	-	255.3 km/h / 158.6 mph	255.3 km/h / 158.6 mph	-	-	-	-	-	250.0 km/h / 155.3 mph	250.0 km/h / 155.3 mph	250.0 km/h / 155.3 mph	-	-	-	-
Seat Height	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in	820 mm / 32.3 in.	820 mm / 32.3 in	820 mm / 32.3 in	820 mm / 32.3 in.	820 mm / 32.3 in	820 mm / 32.3 in	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in.	820 mm / 32.3 in	823 mm / 32.4 in.	820 mm / 32.3 in.	820 mm / 32.3 in.
Fuel Capacity	18.00 litres / 4.76 gallons	18.16 litres / 4.80 gallons	18.16 litres / 4.80 gallons	18.16 litres / 4.80 gallons	18.16 litres / 4.80 gallons	18.2 liters / 4.8 gal	18.16 litres / 4.80 gallons	18.2 liters / 4.8 gal	18.2 liters / 4.8 gal	18.17 litres / 4.80 gallons	18.2 liters / 4.8 gal	18.2 liters / 4.8 gal	18.17 litres / 4.80 gallons	18.17 litres / 4.80 gallons	18.17 litres / 4.80 gallons	18.17 litres / 4.80 gallons	18.17 litres / 4.80 US gallons	18.2 liters / 4.8 gal	18.00 litres / 4.76 US gallons	18.00 litres / 4.76 US gallons	18.00 litres / 4.76 US gallons
CO2	-	-	-	-	-	-	-	132.9 CO	133.2 CO	136.4 CO	-	58.5 CO2 g/km. (CO2 - Carbon dioxide emission)	-	-	-	124.1 CO2 g/km. (CO2 - Carbon dioxide emission)	124.1 CO2 g/km. (CO2 - Carbon dioxide emission)	-	96.5 CO2 g/km. (CO2 - Carbon dioxide emission)	124.1 CO2 g/km. (CO2 - Carbon dioxide emission)	124.1 CO2 g/km. (CO2 - Carbon dioxide emission)

Key Specifications

Engine

In-line four, four-stroke

Power

118 hp / 88.1 kW @ 13500 rpm

Torque

66 Nm / 48.6 lb-ft @ 11250 rpm

Top Speed

255.3 km/h / 158.6 mph

Weight

186 kg / 410 lbs

Fuel Capacity

18.2 liters / 4.8 gal

Full 2010 Honda CBR 600RR Specifications

Year 2010

Colours Pearl Orange/Black, Leyla

Make Model Honda CBR 600RR

Seat Height 820 mm / 32.3 in

Wheelbase 1369 mm / 53.9 in

Ground Clearance 135 mm / 5.3 in

Height 1105 mm / 43.5 in

Length 2015 mm / 79.3 in

Width 685 mm / 26.9 in

Dry Weight 156.5 kg / 345.0 lbs

Fuel Capacity 18.2 liters / 4.8 gal

Wet Weight 186 kg / 410 lbs

Top Speed 255.3 km/h / 158.6 mph

Max Power 118 hp / 88.1 kW @ 13500 rpm

Max Torque 66 Nm / 48.6 lb-ft @ 11250 rpm

Standing Start ¼ Mile 11.1 sec

Fuel Control DOHC

Engine Type In-line four, four-stroke

CO2 132.9 CO

Displacement 599 cc / 36.5 cu-in

Engine Detail Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder.

Fuel System Injection. Dual Stage Fuel Injection (DSFI) with 40mm throttle bodies, Denso 12-hole injectors

Bore x Stroke 67 x 42.5 mm

Compression Ratio 12.2:1

Cooling System Liquid cooled

Engine Oil Specification Synthetic, 10W/40

Fuel Consumption 5.73 litres/100 km (17.5 km/l or 41.05 mpg)

Fuel Induction Dual Stage Fuel Injection (DSFI) with 40mm throttle bodies, Denso 12-hole injectors

Ignition Computer-controlled digital transistorized with electronic advance and independent four-cylinder 3D-mapped computer control.

Lubrication Wet sump

Spark Plug NGK, IMR9C-9H

Starter Electric

Valve System 4

Clutch Cable-operated multiplate wet clutch.

Final Drive #525 O-ring chain

Gearbox 6-speed

Transmission / Drive Close-ratio 6 Speed

Frame Type Aluminium, twin spar

Suspension - Front 41mm inverted Big Piston Fork with spring preload, rebound and compression damping adjustability

Suspension - Rear Unit Pro-Link HMAS single shock with spring preload, rebound and compression damping adjustability;

Rake 23.5°

Trail 97.7mm / 3.9 in

Wheel Travel - Front 120 mm / 4.3 in

Wheel Travel - Rear 129.5 mm / 5.1 in

Brakes - Front Diameter (in.) 12.2 inches

Brakes - Front Diameter (mm) 310 mm

Brakes - Rear Diameter (in.) 8.7 inches

Brakes - Rear Diameter (mm) 220 mm

Brakes - Front 2x 310mm discs 4 piston calipers

Brakes - Rear Single 220mm disc 1 piston caliper

Tyres - Front 120/70 ZR17

Tyres - Rear 180/55 ZR17

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.