![]()
No images available
Tap to enlarge
![]()
2020 Husqvarna TC 50 Overview
For 2020, Husqvarna offers the TC 50 as a cross / motocross motorcycle with 49 cc on tap. The 2020 Husqvarna TC 50 is built around a Single cylinder, two-stroke engine. Internally, bore and stroke are 39.5 x 40 mm. In everyday use, the 2020 TC 50 tips the scales at 41.5 kg, carries a 2.30-litre fuel tank, offers a seat height of 684 mm and spans a 1032 mm wheelbase. That's roughly 57.1 kg lighter than the average cross / motocross motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2020 Husqvarna TC 50 spec sheet below.
2020 TC 50 - Pros & Cons
Strengths
-
🔧
Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.
-
📏
Accessible seat height: At just 684 mm, flat-footing at a stop is easy for most riders - a genuine confidence builder for less experienced owners.
Considerations
-
⛽
Modest fuel capacity: A 2.30-litre tank keeps things light but means budgeting for more frequent fuel stops on any longer ride.
-
⚙️
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.
Wear Points & Servicing Notes
Fuelling & injector care
Fuelling on the TC 50 comes from fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.
Brake disc and pad wear
Single disc up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.
Suspension condition on used examples
Suspension duties are handled by WP-USD, AER 35, 35 mm up front and WP shock absorber at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.
Final drive maintenance
Chain final drive on the TC 50 means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.
Frame & chassis check
The Central-tube frame with double-cradle chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.
Low-speed handling
The TC 50's 41.5 kg kerb weight makes low-speed control noticeably less effort than on a heavier machine.
TC 50 - Buying & Maintenance Guide
What to check before buying
A pre-purchase check on the 2020 Husqvarna TC 50 should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept TC 50 settles to a smooth idle within seconds.
Oil and filter changes
Oil changes are the cheapest insurance you can buy for a TC 50's engine - keep to the manufacturer's interval rather than stretching it. The sump holds 0.90 litres, so budget for that volume of quality motorcycle-specific engine oil. Use the viscosity grade the manual specifies, not whatever's on sale.
Fuel system care
Injector systems like the TC 50's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.
2020 Husqvarna TC 50 - Frequently Asked Questions
What engine does the 2020 Husqvarna TC 50 have?
The 2020 Husqvarna TC 50 uses a Single cylinder, two-stroke engine with 49 cc of displacement.
How much does the 2020 Husqvarna TC 50 weigh?
The 2020 Husqvarna TC 50 weighs 41.5 kg. This is the manufacturer's dry figure.
What is the fuel tank capacity of the 2020 Husqvarna TC 50?
The 2020 Husqvarna TC 50 has a 2.30-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 38-45 km between stops.
Is the 2020 Husqvarna TC 50 suitable for shorter riders?
The 2020 Husqvarna TC 50 has a seat height of 684 mm. This is a comfortable, accessible height for most riders.
What brakes does the 2020 Husqvarna TC 50 have?
The 2020 Husqvarna TC 50 uses Single disc at the front and Single disc at the rear.
How much oil does the 2020 Husqvarna TC 50 take?
The 2020 Husqvarna TC 50 takes 0.90 litres of engine oil at a full oil and filter change. Always verify against the dipstick or sight glass after filling.
What fuel system does the 2020 Husqvarna TC 50 use?
The 2020 Husqvarna TC 50 uses Injection, providing precise fuelling across the rev range and reliable cold-start behaviour.
Husqvarna TC 50 Spec Evolution
The Husqvarna TC 50 was produced across 7 model years (2017-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2017 |
2018 |
2019 |
2020 |
2021 |
2022 |
2023 |
| Seat Height |
684 mm / 26.9 in. |
684 mm / 26.9 in. |
684 mm / 26.9 in. |
684 mm / 26.9 in. |
665 mm / 26.2 in. |
665 mm / 26.2 in. |
665 mm / 26.2 in. |
| Fuel Capacity |
2.30 litres / 0.61 gallons |
2.30 litres / 0.61 gallons |
2.30 litres / 0.61 US gallons |
2.30 litres / 0.61 US gallons |
2.30 litres / 0.61 US gallons |
2.30 litres / 0.61 US gallons |
2.30 litres / 0.61 US gallons |
| Oil Capacity (Quarts) |
0.06 quarts |
0.06 quarts |
0.95 US quarts |
0.95 US quarts |
0.95 US quarts |
0.95 US quarts |
0.95 US quarts |
| Displacement (cc) |
49.00 cc |
49.00 cc |
49.0 cc |
49.0 cc |
49.0 cc |
49.0 cc |
49.0 cc |
| Brakes - Rear Diameter (mm) |
160 mm |
160 mm |
- |
- |
- |
- |
- |
| Brakes - Rear Diameter (in.) |
6.3 inches |
6.3 inches |
- |
- |
- |
- |
- |
| Brakes - Front Diameter (mm) |
160 mm |
160 mm |
- |
- |
- |
- |
- |
| Brakes - Front Diameter (in.) |
6.3 inches |
6.3 inches |
- |
- |
- |
- |
- |
Key Specifications
Engine
Single cylinder, two-stroke
Power
Not published by manufacturer
Torque
Not published by manufacturer
Top Speed
Not published by manufacturer
Weight
41.5 kg / 91.5 lbs
Fuel Capacity
2.30 litres / 0.61 US gallons
Advertisement
Full 2020 Husqvarna TC 50 Specifications
Colours
White/blue/yellow
Warranty
2 Years
Ground Clearance (in.)
9.9 inches
Ground Clearance (mm)
252 mm
Seat Height
684 mm / 26.9 in.
Wheelbase
1032 mm / 40.6 in.
Oil Capacity (l)
0.90 litres
Oil Capacity (Quarts)
0.95 US quarts
Dry Weight
41.5 kg / 91.5 lbs
Fuel Capacity
2.30 litres / 0.61 US gallons
Bore x Stroke (in,)
1.6 x 1.6 inches
Bore x Stroke (mm)
39.5 x 40.0 mm
Displacement (cc)
49.0 cc
Displacement (ci)
2.99 cubic inches
Engine Type
Single cylinder, two-stroke
Fuel System
Injection
Engine Lubrication
Mixture oil lubrication
Ignition
Seletra 2p D36
Starter
Kick
Clutch
Centrifugal clutch (adjustable)
Final Drive
Chain (final drive)
Gearbox
Automatic
Primary Drive
Single-speed automatic. Primary drive: 61.
Frame Type
Central-tube frame with double-cradle
Suspension - Front
WP-USD, AER 35, 35 mm
Suspension - Rear
WP shock absorber
Rake
24.0°
Wheel Travel - Front
205 mm / 8.1 in.
Wheel Travel - Rear
185 mm / 7.3 in.
Brakes - Front
Single disc
Brakes - Rear
Single disc
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement