2020 Husqvarna TC 50 vs 2019 KTM 50 SX Mini
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | - | The engine power can be restricted to 5.5 hp with a kit. |
| Colours | White/blue/yellow | Orange/white/black |
| Warranty | 2 Years | - |
| Dimensions |
| Ground Clearance (mm) | 252 mm | 252 mm |
| Ground Clearance (in.) | 9.9 inches | 9.9 inches |
| Seat Height | 684 mm / 26.9 in. | 684 mm / 26.9 in. |
| Wheelbase | 1032 mm / 40.6 in. | 1032 mm / 40.6 in. |
| Weights & Capacities |
| Oil Capacity (Quarts) | 0.95 US quarts | - |
| Oil Capacity (l) | 0.90 litres | - |
| Dry Weight | 41.5 kg / 91.5 lbs | 40 kg / 88.2 lbs |
| Fuel Capacity | 2.30 litres / 0.61 US gallons | 2.10 litres / 0.55 US gallons |
| Engine |
| Bore x Stroke (in,) | 1.6 x 1.6 inches | 1.6 x 1.6 inches |
| Bore x Stroke (mm) | 39.5 x 40.0 mm | 39.5 x 40.0 mm |
| Displacement (cc) | 49.0 cc | 49.0 cc |
| Displacement (ci) | 2.99 cubic inches | 2.99 cubic inches |
| Engine Type | Single cylinder, two-stroke | Single cylinder, two-stroke |
| Engine Detail | - | Reed intake |
| Fuel System | Injection | Carburettor. Mikuni TMX |
| Engine Lubrication | Mixture oil lubrication | Mixture oil lubrication |
| Ignition | Seletra 2p D36 | Seletra 2p D36 |
| Starter | Kick | Kick |
| Drivetrain |
| Clutch | Centrifugal clutch (adjustable) | Centrifugal clutch |
| Final Drive | Chain (final drive) | Chain (final drive) |
| Gearbox | Automatic | 1-speed |
| Primary Drive | Single-speed automatic. Primary drive: 61. | - |
| Chassis |
| Frame Type | Central-tube frame with double-cradle | Chrome-molybdenum steel central-tube frame |
| Suspension - Front | WP-USD, AER 35, 35 mm | WP upside-down Ø 35 mm |
| Suspension - Rear | WP shock absorber | WP shock absorber |
| Rake | 24.0° | 24.0° |
| Wheel Travel - Front | 205 mm / 8.1 in. | 100 mm / 3.9 in. |
| Wheel Travel - Rear | 185 mm / 7.3 in. | 147 mm / 5.8 in. |
| Wheels & Brakes |
| Brakes - Front | Single disc | Single disc. Four-piston calipers. |
| Brakes - Rear | Single disc | Single disc. Two-piston calipers. |
| Rims | - | Wire spoked |
Verdict
🏆
Winner on specs
2020 Husqvarna TC 50
The 2020 Husqvarna TC 50 edges out the 2019 KTM 50 SX Mini thanks to its fuel injection, higher rear wheel travel and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2020 Husqvarna TC 50 - Advantages
- 🔧Fuel injection: Precise fuelling, better cold-start reliability, and lower maintenance requirements.
- 🔄More rear wheel travel: 185 mm vs 147 mm - absorbs bigger hits and rough terrain better.
- 🔄More front wheel travel: 205 mm vs 100 mm - greater compliance over rough surfaces.
2019 KTM 50 SX Mini - Advantages
- ✓Competitive all-round: The 2019 KTM 50 SX Mini matches or exceeds its rival across all measured criteria.
2020 Husqvarna TC 50 vs 2019 KTM 50 SX Mini - FAQs
Which should I buy, the 2020 Husqvarna TC 50 or the 2019 KTM 50 SX Mini?
Both are strong choices. The 2020 Husqvarna TC 50 has the edge in fuel injection and higher rear wheel travel, while the 2019 KTM 50 SX Mini offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.