2019 BMW R 1250GS Adventure Specifications

Enduro / Off-Road • Specs last verified 13 July 2026

No images available
Tap to enlarge

2019 BMW R 1250GS Adventure Overview

The 2019 BMW R 1250GS Adventure is an enduro / off-road motorcycle built around 1254 cc of displacement. Under the tank sits a Two cylinder boxer, four-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation, a compression ratio of 12.5:1. 2019 BMW R 1250GS Adventure delivers 136 hp @ 7750 rpm of peak power and 143 Nm @ 6250 rpm of torque. The factory-quoted top speed stands at 200 km/h, making it a capable performer in its class. From a practical standpoint, the 2019 R 1250GS Adventure tips the scales at 268 kg, carries a 30-litre fuel tank, offers a seat height of 890 mm to 910 mm and spans a 1504 mm wheelbase. That's roughly 69.2 kg heavier than the average enduro / off-road motorcycle in our database. Scroll down for the complete 2019 BMW R 1250GS Adventure spec sheet covering every technical detail from suspension travel to tyre sizes.

2019 R 1250GS Adventure - Pros & Cons

Strengths

  • Strong power output: 2019 BMW R 1250GS Adventure makes 136 hp @ 7750 rpm with 143 Nm @ 6250 rpm of torque - competitive figures for its class.
  • Fuel injection: The Electronic intake pipe injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.
  • Large fuel range: The 30-litre tank is generously sized, translating to extended range between stops - ideal for touring or longer commutes.
  • Low-maintenance final drive: Shaft final drive means no chain to clean, lube or adjust - meaningfully less routine maintenance than a chain-driven equivalent.

Considerations

  • Tall seat height: The 890 mm to 910 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.

Wear Points & Servicing Notes

Heat management in traffic

R 1250GS Adventure's air-cooled design means engine-bay temperatures build up more in stop-start traffic than on a liquid-cooled equivalent - a function of the cooling method itself, not a defect. Mesh riding gear and avoiding prolonged idling help in hot climates.

Fuelling & injector care

Fuelling comes from Electronic intake pipe injection. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.

Valve clearance checks

Double Overhead Cams/Twin Cam (DOHC) valve actuation on the R 1250GS Adventure means clearances should be checked at the manufacturer's specified interval - they can tighten as mileage accumulates, and a light top-end tick is usually the first sign.

Brake disc and pad wear

The 2x 305mm floating discs, 4-piston radial brake calipers front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Suspension condition on used examples

Up front, the R 1250GS Adventure runs BMW Motorrad 37mm Telelever, central spring strut and Cast aluminium single-sided swing arm with BMW Motorrad Paralever, WAD spring strut, continuously adjustable spring preload by means of hand wheel, rebound-stage damping adjustable by hand wheel at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by shaft - no chain or belt maintenance at all, though the drive-shaft oil should be changed on the manufacturer's interval.

Frame & chassis check

The frame is Two-section frame concept consisting of main frame with bolt-on rear frame, load-bearing engine - worth a visual check for corrosion or impact damage around the head-stock and swingarm pivot on any used example, since frame damage is far costlier to fix than any service item.

Handling the weight at a standstill

At 268 kg, the R 1250GS Adventure is a substantial machine - low-speed manoeuvring in car parks takes more physical effort than on a lighter bike, though the weight disappears once rolling.

R 1250GS Adventure - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2019 BMW R 1250GS Adventure, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained R 1250GS Adventure should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any R 1250GS Adventure. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The R 1250GS Adventure's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used R 1250GS Adventure. A bike with clearances out of spec doesn't always feel obviously wrong - but tight clearances accelerate valve seat wear. Ask for service documentation proving it's been done.

2019 BMW R 1250GS Adventure - Frequently Asked Questions

What engine does the 2019 BMW R 1250GS Adventure have?
The 2019 BMW R 1250GS Adventure uses a Two cylinder boxer, four-stroke engine with 1254 cc of displacement. It is liquid / air cooled.
What is the top speed of the 2019 BMW R 1250GS Adventure?
The 2019 BMW R 1250GS Adventure has a factory-quoted top speed of 200 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.
How much does the 2019 BMW R 1250GS Adventure weigh?
The 2019 BMW R 1250GS Adventure weighs 268 kg. This is the manufacturer's wet figure.
How much power does the 2019 BMW R 1250GS Adventure make?
The 2019 BMW R 1250GS Adventure produces 136 hp @ 7750 rpm of power and 143 Nm @ 6250 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2019 BMW R 1250GS Adventure?
The 2019 BMW R 1250GS Adventure has a 30-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 500-600 km between stops.
Is the 2019 BMW R 1250GS Adventure suitable for shorter riders?
The 2019 BMW R 1250GS Adventure has a seat height of 890 mm to 910 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2019 BMW R 1250GS Adventure have?
The 2019 BMW R 1250GS Adventure uses 2x 305mm floating discs, 4-piston radial brake calipers at the front and Single 276mm disc, 2-piston floating caliper at the rear.
What tyre sizes does the 2019 BMW R 1250GS Adventure use?
The 2019 BMW R 1250GS Adventure runs 120/70 R19 front and 170/60 R17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2019 BMW R 1250GS Adventure have?
The 2019 BMW R 1250GS Adventure is fitted with a Constant mesh 6-speed gearbox with helical gearing system transmission.

BMW R 1250GS Adventure Spec Evolution

The BMW R 1250GS Adventure was produced across 5 model years (2019-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 2019 2020 2021 2022 2023
Wet Weight 268 kg / 591 lbs 268 kg / 591 lbs 268 kg / 591 lbs 268.1 kg / 591.0 lbs 268.1 kg / 591.0 lbs
Engine Detail Four stroke, two cylinder horizontally opposed Boxer, with two overhead, spur gear driven camshafts , a counterbalance shaft and variable intake camshaft control system BMW ShiftCam, 4 valves per cylinder, Intake 40mm, outlet 34 mm Four stroke, two cylinder horizontally opposed Boxer, with two overhead, spur gear driven camshafts , a counterbalance shaft and variable intake camshaft control system BMW ShiftCam, 4 valves per cylinder, Intake 40mm, outlet 34 mm Four stroke, two cylinder horizontally opposed Boxer, with two overhead spur gear driven camshafts , a counterbalance shaft and variable intake camshaft control system BMW ShiftCam, 4 valves per cylinder, intake 40mm, outlet 34 mm Balance shaft and variable engine timing system Balance shaft and variable engine timing system
Top Speed 200.0 km/h / 124.3 mph 200.0 km/h / 124.3 mph 200.0 km/h / 124.3 mph 193.1 km/h / 120.0 mph 193.1 km/h / 120.0 mph
Seat Height 890 mm to 910 mm / 35 in to 35.8 in 820 mm to 910 mm / 32 in to 35.8 in - possible 890 mm to 910 mm / 35 in to 35.8 in 820 mm to 910 mm / 32 in to 35.8 in - possible 890 mm to 910 mm / 35 in to 35.8 in 820 mm to 910 mm / 32 in to 35.8 in - possible 890 mm / 35.0 in. 890 mm / 35.0 in.
Fuel Capacity 30 Litres / 7.9 US gal 30 Litres / 7.9 US gal 30 Litres / 7.9 US gal 29.90 litres / 7.90 US gallons 29.90 litres / 7.90 US gallons
CO2 109.0 CO2 g/km. (CO2 - Carbon dioxide emission) 110.2 CO2 g/km. (CO2 - Carbon dioxide emission) 110.2 CO2 g/km. (CO2 - Carbon dioxide emission) 110.2 CO2 g/km. (CO2 - Carbon dioxide emission) 110.2 CO2 g/km. (CO2 - Carbon dioxide emission)
Comments Windscreen. - Dynamic Traction Control 3 Ride Modes (ECO, Rain and Road). Traction Control. 3 Ride Modes (ECO, Rain and Road). Traction Control. Hill Start Control.
Frame Type Two-section frame concept consisting of main frame with bolt-on rear frame, load-bearing engine Two-section frame concept consisting of main frame with bolt-on rear frame, load-bearing engine Two-section frame concept consisting of main frame with bolt-on rear frame, load-bearing engine Two-section frame, front- and bolted on rear frame, load-bearing engine Two-section frame, front- and bolted on rear frame, load-bearing engine

Key Specifications

Engine

Two cylinder boxer, four-stroke

Power

136 hp / 100 kW @ 7750 rpm

Torque

143 Nm / 105.4 lb-ft @ 6250 rpm

Top Speed

200.0 km/h / 124.3 mph

Weight

268 kg / 591 lbs

Fuel Capacity

30 Litres / 7.9 US gal

Advertisement

Full 2019 BMW R 1250GS Adventure Specifications

Comments Windscreen.
Year 2019
Colours Ice Grey, Style HP, Style Exclusive
Make Model BMW R 1250GS Adventure
Seat Heigth -Alternate (mm) 910 mm
Seat Heigth -Alternate (in.) 35.8 inches
Seat Height 890 mm to 910 mm / 35 in to 35.8 in 820 mm to 910 mm / 32 in to 35.8 in - possible
Wheelbase 1504 mm / 59.2 in
Height 1460 mm / 57.5 in.
Length 952 mm / 37.5 in (including mirrors)
Width 952 mm / 37.5 in (including mirrors)
Fuel Capacity 30 Litres / 7.9 US gal
Wet Weight 268 kg / 591 lbs
Top Speed 200.0 km/h / 124.3 mph
Max Power 136 hp / 100 kW @ 7750 rpm
Max Torque 143 Nm / 105.4 lb-ft @ 6250 rpm
Fuel Control Double Overhead Cams/Twin Cam (DOHC)
Engine Type Two cylinder boxer, four-stroke
CO2 109.0 CO2 g/km. (CO2 - Carbon dioxide emission)
Displacement 1254 cc / 76.5 cu-in
Engine Detail Four stroke, two cylinder horizontally opposed Boxer, with two overhead, spur gear driven camshafts , a counterbalance shaft and variable intake camshaft control system BMW ShiftCam, 4 valves per cylinder, Intake 40mm, outlet 34 mm
Fuel System Injection. Electronic intake pipe injection
Bore x Stroke 102.5 x 76 mm
Compression Ratio 12.5:1
Cooling System Liquid / Air cooled
Emissions Closed-loop three-way catalytic converter, exhaust standard , Euro 4
Engine Lubrication Dry sump
Engine Management BMS-O
Fuel Consumption 4.70 litres/100 km (21.3 km/l or 50.05 mpg)
Fuel Induction Electronic intake pipe injection, 52mm Ø throttle valve
Fuel Reserve 4.00 litres / 1.06 US gallons
Fuel Type Premium unleaded, 95 (RON)
Starter Electric 900W
Valve System 4
Battery Capacity 12V/12Ah
Clutch Wet clutch with anti-hopping function, hydraulically activated
Final Drive Shaft
Gear Ratios 1st 2.438 2nd 1.714 3rd 1.296 4th 1.059 5th 0.943 6th 0.848
Gearbox 6-speed
Primary Drive Constant mesh
Primary Drive Ratios 1.650
Secondary Drive Ratio 2.910
Transmission / Drive Constant mesh 6-speed gearbox with helical gearing system
Frame Type Two-section frame concept consisting of main frame with bolt-on rear frame, load-bearing engine
Suspension - Front BMW Motorrad 37mm Telelever, central spring strut
Suspension - Rear Cast aluminium single-sided swing arm with BMW Motorrad Paralever, WAD spring strut, continuously adjustable spring preload by means of hand wheel, rebound-stage damping adjustable by hand wheel (Option: Dynamic ESA)
Rake 25.5°
Steering Angle 65.1°
Trail 95.4 mm / 3.8 in
Wheel Travel - Front 210 mm / in
Wheel Travel - Rear 220 mm / 8.7 in
Brakes - Front 2x 305mm floating discs, 4-piston radial brake calipers
Brakes - Rear Single 276mm disc, 2-piston floating caliper
ABS BMW Motorrad Integral ABS as standard (part integral), disengageable (option: ABS Pro)
Rims Aluminium-Gussräder
Tyres - Front 120/70 R19
Tyres - Rear 170/60 R17
Wheels Cross spoke
Wheels - Front 3.00 x 19
Wheels - Rear 4.50 x 17

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.

Advertisement