1984 Yamaha IT 200 Specifications

Name: 1984 Yamaha IT 200
Brand: Yamaha

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

1984 Yamaha IT 200 Overview

The 1984 Yamaha IT 200 is an enduro / off-road motorcycle built around 195 cc of displacement. Under the tank sits a Two stroke, single cylinder, reed valve engine, a compression ratio of 8.4;1. 1984 Yamaha IT 200 delivers 26.6 hp @ 9500 rpm of peak power and 18.8 lb-ft @ 7500 rpm of torque. From a practical standpoint, the 1984 IT 200 tips the scales at 95.7 kg and carries a 11-litre fuel tank. That's roughly 103.2 kg lighter than the average enduro / off-road motorcycle in our database. Scroll down for the complete 1984 Yamaha IT 200 spec sheet covering every technical detail from suspension travel to tyre sizes.

1984 IT 200 - Pros & Cons

Strengths

Strong power output: 1984 Yamaha IT 200 makes 26.6 hp @ 9500 rpm with 18.8 lb-ft @ 7500 rpm of torque - competitive figures for its class.

Considerations

Carburetor fuelling: Carbureted engines need occasional jetting attention and can be reluctant in cold weather or at altitude compared to modern fuel-injected alternatives.
Modest fuel capacity: The 11-litre tank means more frequent fuel stops on longer rides, which is worth planning around on touring routes.
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.

Wear Points & Servicing Notes

Heat management in traffic

IT 200's air-cooled design means engine-bay temperatures build up more in stop-start traffic than on a liquid-cooled equivalent - a function of the cooling method itself, not a defect. Mesh riding gear and avoiding prolonged idling help in hot climates.

Carburetor maintenance

The IT 200 uses carburetion rather than fuel injection, which means jetting is altitude- and temperature-sensitive and benefits from a clean-and-rejet after extended storage or an exhaust change.

Suspension condition on used examples

Up front, the IT 200 runs 43mm Kayaba forks and Monoshock at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.

Low-speed handling

At just 95.7 kg, the IT 200 is light enough to manhandle easily at a standstill - one of the practical advantages of its class.

IT 200 - Buying & Maintenance Guide

What to check before buying

When inspecting a used 1984 Yamaha IT 200, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained IT 200 should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any IT 200. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Carburetor upkeep

Keep the carburetors clean and free of deposits. If the IT 200 has been stored, strip and clean the carb float bowls before attempting to start it. Pilot jets are the first to block and the last to be checked - always include them in any carb rebuild.

1984 Yamaha IT 200 - Frequently Asked Questions

What engine does the 1984 Yamaha IT 200 have?

The 1984 Yamaha IT 200 uses a Two stroke, single cylinder, reed valve engine with 195 cc of displacement. It is air cooled.

How much does the 1984 Yamaha IT 200 weigh?

The 1984 Yamaha IT 200 weighs 95.7 kg. This is the manufacturer's dry figure.

How much power does the 1984 Yamaha IT 200 make?

The 1984 Yamaha IT 200 produces 26.6 hp @ 9500 rpm of power and 18.8 lb-ft @ 7500 rpm of torque. These are peak figures.

What is the fuel tank capacity of the 1984 Yamaha IT 200?

The 1984 Yamaha IT 200 has a 11-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 183-220 km between stops.

What brakes does the 1984 Yamaha IT 200 have?

The 1984 Yamaha IT 200 uses Drum at the front and Drum at the rear.

What tyre sizes does the 1984 Yamaha IT 200 use?

The 1984 Yamaha IT 200 runs 90/90 -21 front and 12/90 -18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 1984 Yamaha IT 200 have?

The 1984 Yamaha IT 200 is fitted with a 6 Speed transmission.

Yamaha IT 200 Spec Evolution

The Yamaha IT 200 was produced across 2 model years (1984-1990). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	1984	1990
Brakes - Front	Drum	Single disc
Brakes - Rear	Drum	Single disc
Compression Ratio	8.4;1	8.4:1

Key Specifications

Engine

Two stroke, single cylinder, reed valve

Power

26.6 hp @ 9500 rpm

Torque

18.8 lb-ft @ 7500 rpm

Top Speed

Not published by manufacturer

Weight

95.7 kg / 211 lbs

Fuel Capacity

11 Litres / 2.9 US gal

Full 1984 Yamaha IT 200 Specifications

Year 1984

Make Model Yamaha IT 200

Dry Weight 95.7 kg / 211 lbs

Fuel Capacity 11 Litres / 2.9 US gal

Max Power 26.6 hp @ 9500 rpm

Max Torque 18.8 lb-ft @ 7500 rpm

Displacement 195 cc / 11.8 cu-in

Engine Detail Two stroke, single cylinder, reed valve

Bore x Stroke 66 x 56mm

Compression Ratio 8.4;1

Cooling System Air cooled

Fuel Induction 34mm Mikuni carburetor

Ignition CDI

Spark Plug Champion N86

Starter Kick

Final Drive Chain

Transmission / Drive 6 Speed

Suspension - Front 43mm Kayaba forks

Suspension - Rear Monoshock

Brakes - Front Drum

Brakes - Rear Drum

Tyres - Front 90/90 -21

Tyres - Rear 12/90 -18

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.