1984 Yamaha IT 200 vs 2006 Honda CRF 250X
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Year | 1984 | - |
| Colours | - | Red |
| Make Model | Yamaha IT 200 | - |
| Dimensions |
| Ground Clearance (in.) | - | 13.6 inches |
| Ground Clearance (mm) | - | 345 mm |
| Seat Height | - | 958 mm / 37.7 in. |
| Wheelbase | - | 1,481 mm / 58.3 in. |
| Weights & Capacities |
| Dry Weight | 95.7 kg / 211 lbs | 102.1 kg / 225.0 lbs |
| Fuel Capacity | 11 Litres / 2.9 US gal | 8.32 litres / 2.20 gallons |
| Performance |
| Max Power | 26.6 hp @ 9500 rpm | - |
| Max Torque | 18.8 lb-ft @ 7500 rpm | - |
| Engine |
| Stroke | - | 4 |
| Displacement (cc) | - | 249.00 cc |
| Bore x Stroke (mm) | - | 78.0 x 52.2 mm |
| Bore x Stroke (in,) | - | 3.1 x 2.1 inches |
| Displacement (ci) | - | 15.19 cubic inches |
| Engine Type | - | Single cylinder |
| Displacement | 195 cc / 11.8 cu-in | - |
| Engine Detail | Two stroke, single cylinder, reed valve | - |
| Fuel System | - | Carburettor. Keihin 37.0 mm flat-slide with throttle position sensor (TPS) |
| Bore x Stroke | 66 x 56mm | - |
| Compression Ratio | 8.4;1 | 12.5:1 |
| Cooling System | Air cooled | - |
| Fuel Induction | 34mm Mikuni carburetor | - |
| Ignition | CDI | CD with electronic advance and lighting coil |
| Spark Plug | Champion N86 | - |
| Starter | Kick | Electric & kick |
| Drivetrain |
| Final Drive | Chain | Chain |
| Gearbox | - | 5-speed |
| Transmission / Drive | 6 Speed | - |
| Chassis |
| Suspension - Front | 43mm Kayaba forks | 47.0mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability |
| Suspension - Rear | Monoshock | Pro-Link Showa single shock with spring-preload, 17-position rebound-damping adjustability, and compression-damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns) |
| Rake | - | 27.9° |
| Trail | - | 118 mm / 4.6 in. |
| Wheel Travel - Front | - | 315 mm / 12.4 in. |
| Wheel Travel - Rear | - | 315 mm / 12.4 in. |
| Wheels & Brakes |
| Brakes - Front Diameter (in.) | - | 9.4 inches |
| Brakes - Front Diameter (mm) | - | 240 mm |
| Brakes - Rear Diameter (mm) | - | 240 mm |
| Brakes - Rear Diameter (in.) | - | 9.4 inches |
| Brakes - Front | Drum | Single disc |
| Brakes - Rear | Drum | Single disc |
| Tyres - Front | 90/90 -21 | 80/70-21 |
| Tyres - Rear | 12/90 -18 | 100/90-18 |
Verdict
⚖️
Too close to call
The 1984 Yamaha IT 200 and the 2006 Honda CRF 250X are evenly matched across the key measurable criteria. Your decision comes down to personal preference, riding style, and which brand's dealer network best suits your location.
Key Differences
1984 Yamaha IT 200 - Advantages
- ✓Competitive all-round: The 1984 Yamaha IT 200 matches or exceeds its rival across all measured criteria.
2006 Honda CRF 250X - Advantages
- ✓Competitive all-round: The 2006 Honda CRF 250X matches or exceeds its rival across all measured criteria.
1984 Yamaha IT 200 vs 2006 Honda CRF 250X - FAQs
What are the engine differences between the 1984 Yamaha IT 200 and 2006 Honda CRF 250X?
The 1984 Yamaha IT 200 uses Two stroke, single cylinder, reed valve, while the 2006 Honda CRF 250X is powered by Single cylinder.
Which should I buy, the 1984 Yamaha IT 200 or the 2006 Honda CRF 250X?
Both are strong choices. The 1984 Yamaha IT 200 has its own strengths, while the 2006 Honda CRF 250X offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.