2006 Honda CRF 250X Specifications

Enduro / Off-Road • Specs last verified 13 July 2026

No images available
Tap to enlarge

2006 Honda CRF 250X Overview

The 2006 Honda CRF 250X is an enduro / off-road motorcycle built around 249 cc of displacement. Under the tank sits a Single cylinder engine, a compression ratio of 12.5:1. The bore and stroke measures 78 x 52.2 mm. From a practical standpoint, the 2006 CRF 250X tips the scales at 102.1 kg, carries a 8.32-litre fuel tank, offers a seat height of 958 mm and spans a 1,481 mm wheelbase. That's roughly 96.7 kg lighter than the average enduro / off-road motorcycle in our database. Scroll down for the complete 2006 Honda CRF 250X spec sheet covering every technical detail from suspension travel to tyre sizes.

2006 CRF 250X - Pros & Cons

Strengths

  • Factory engineering: The 2006 Honda CRF 250X represents Honda's engineering at the time, with a specification built around real-world usability.

Considerations

  • Carburetor fuelling: Carbureted engines need occasional jetting attention and can be reluctant in cold weather or at altitude compared to modern fuel-injected alternatives.
  • Tall seat height: The 958 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.
  • Modest fuel capacity: The 8.32-litre tank means more frequent fuel stops on longer rides, which is worth planning around on touring routes.
  • Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.

Wear Points & Servicing Notes

Carburetor maintenance

The CRF 250X uses carburetion rather than fuel injection, which means jetting is altitude- and temperature-sensitive and benefits from a clean-and-rejet after extended storage or an exhaust change.

Brake disc and pad wear

The Single disc front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Suspension condition on used examples

Up front, the CRF 250X runs 47.0mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability and Pro-Link Showa single shock with spring-preload, 17-position rebound-damping adjustability, and compression-damping adjustment separated into low-speed at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.

Low-speed handling

At just 102.1 kg, the CRF 250X is light enough to manhandle easily at a standstill - one of the practical advantages of its class.

CRF 250X - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2006 Honda CRF 250X, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained CRF 250X should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any CRF 250X. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Carburetor upkeep

Keep the carburetors clean and free of deposits. If the CRF 250X has been stored, strip and clean the carb float bowls before attempting to start it. Pilot jets are the first to block and the last to be checked - always include them in any carb rebuild.

2006 Honda CRF 250X - Frequently Asked Questions

What engine does the 2006 Honda CRF 250X have?
The 2006 Honda CRF 250X uses a Single cylinder engine with 249 cc of displacement.
How much does the 2006 Honda CRF 250X weigh?
The 2006 Honda CRF 250X weighs 102.1 kg. This is the manufacturer's dry figure.
What is the fuel tank capacity of the 2006 Honda CRF 250X?
The 2006 Honda CRF 250X has a 8.32-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 138-166 km between stops.
Is the 2006 Honda CRF 250X suitable for shorter riders?
The 2006 Honda CRF 250X has a seat height of 958 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2006 Honda CRF 250X have?
The 2006 Honda CRF 250X uses Single disc at the front and Single disc at the rear.
What tyre sizes does the 2006 Honda CRF 250X use?
The 2006 Honda CRF 250X runs 80/70-21 front and 100/90-18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What fuel system does the 2006 Honda CRF 250X use?
The 2006 Honda CRF 250X uses Carburettor. Keihin 37.0 mm flat-slide with throttle position sensor (TPS), providing precise fuelling across the rev range and reliable cold-start behaviour.

Honda CRF 250X Spec Evolution

The Honda CRF 250X was produced across 13 model years (2004-2019). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 2004 2005 2006 2007 2008 2009 2010 2012 2014 2016 2017 2018 2019
Wet Weight - - - - - 114.8 kg / 253.0 lbs 114.8 kg / 253.0 lbs 114.8 kg / 253.0 lbs 115 kg / 253 lbs 115 kg / 253 lbs 115.2 kg / 254.0 lbs 115.2 kg / 254.0 lbs 115.2 kg / 254.0 lbs
Dry Weight - 103.4 kg / 228.0 lbs 102.1 kg / 225.0 lbs 102.1 kg / 225.0 lbs 114.8 kg / 253.0 lbs - - 88 kg / 194.0 lbs 102 kg / 224.8 lbs 102 kg / 224.8 lbs - - -
Engine Detail - - - - - - - Unicam&reg, four-valve; 31mm intake valve, 26mm exhaust valve Four stroke single cylinder, 4 valves Four stroke single cylinder, 4 valves Gear-driven counterbalancer 31mm intake valve, 26mm exhaust valve 31mm intake valve, 26mm exhaust valve
Engine Type Single cylinder Single cylinder Single cylinder Single cylinder Single cylinder Single cylinder Single cylinder, four-stroke Single cylinder, four-stroke Single cylinder, four-stroke Single cylinder, four-stroke Single cylinder, four-stroke Single cylinder, four-stroke Single cylinder, four-stroke
Seat Height 963 mm / 37.9 in. 963 mm / 37.9 in. 958 mm / 37.7 in. 958 mm / 37.7 in. 958 mm / 37.7 in. 958 mm / 37.7 in. 958 mm / 37.7 in. 958 mm / 37.7 in. 958 mm / 37.7 in. 958 mm / 37.7 in 958 mm / 37.7 in. 958 mm / 37.7 in. 958 mm / 37.7 in.
Fuel Capacity 8.32 litres / 2.20 gallons 8.32 litres / 2.20 gallons 8.32 litres / 2.20 gallons 8.32 litres / 2.20 gallons 7.19 litres / 1.90 gallons 7.19 litres / 1.90 gallons 7.19 litres / 1.90 gallons 8.6 Litres / 2.27 gal 7.19 litres / 1.90 gallons 7.19 litres / 1.90 gallons 7.19 litres / 1.90 gallons 7.19 litres / 1.90 gallons 7.19 litres / 1.90 US gallons
Ground Clearance (mm) - 361 mm 345 mm 345 mm 340 mm 340 mm 345 mm 345 mm 345 mm 345 mm 345 mm 345 mm 345 mm
Ground Clearance (in.) - 14.2 inches 13.6 inches 13.6 inches 13.4 inches 13.4 inches 13.6 inches 13.6 inches 13.6 inches 13.6 inches 13.6 inches 13.6 inches 13.6 inches

Key Specifications

Engine

Single cylinder

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

Not published by manufacturer

Weight

102.1 kg / 225.0 lbs

Fuel Capacity

8.32 litres / 2.20 gallons

Advertisement

Full 2006 Honda CRF 250X Specifications

Colours Red
Ground Clearance (in.) 13.6 inches
Ground Clearance (mm) 345 mm
Seat Height 958 mm / 37.7 in.
Wheelbase 1,481 mm / 58.3 in.
Dry Weight 102.1 kg / 225.0 lbs
Fuel Capacity 8.32 litres / 2.20 gallons
Bore x Stroke (in,) 3.1 x 2.1 inches
Bore x Stroke (mm) 78.0 x 52.2 mm
Displacement (cc) 249.00 cc
Displacement (ci) 15.19 cubic inches
Engine Type Single cylinder
Stroke 4
Fuel System Carburettor. Keihin 37.0 mm flat-slide with throttle position sensor (TPS)
Compression Ratio 12.5:1
Ignition CD with electronic advance and lighting coil
Starter Electric & kick
Final Drive Chain
Gearbox 5-speed
Suspension - Front 47.0mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability
Suspension - Rear Pro-Link Showa single shock with spring-preload, 17-position rebound-damping adjustability, and compression-damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns)
Rake 27.9°
Trail 118 mm / 4.6 in.
Wheel Travel - Front 315 mm / 12.4 in.
Wheel Travel - Rear 315 mm / 12.4 in.
Brakes - Front Diameter (in.) 9.4 inches
Brakes - Front Diameter (mm) 240 mm
Brakes - Rear Diameter (in.) 9.4 inches
Brakes - Rear Diameter (mm) 240 mm
Brakes - Front Single disc
Brakes - Rear Single disc
Tyres - Front 80/70-21
Tyres - Rear 100/90-18

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.

Advertisement