2023 Husqvarna FC250 Specifications

Cross / motocross • Specs last verified 13 July 2026

No images available
Tap to enlarge

2023 Husqvarna FC250 Overview

For 2023, Husqvarna offers the FC250 as a cross / motocross motorcycle with 249.9 cc on tap. The 2023 Husqvarna FC250 is built around a Single cylinder, four-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation, a compression ratio of 14.5:1. Internally, bore and stroke are 81 x 48.5 mm. In everyday use, the 2023 FC250 tips the scales at 101.5 kg, carries a 7.20-litre fuel tank, offers a seat height of 939 mm and spans a 1482 mm wheelbase. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2023 Husqvarna FC250 spec sheet below.

2023 Husqvarna FC250 compared with other bikes in the Cross / motocross category

Measured against other bikes in the Cross / motocross category in our database (up to 224 models, one entry per model), the 2023 Husqvarna FC250 comes out as follows.

  • With 250 cc, the FC250 has the joint 99th largest engine displacement of 224 bikes in the Cross / motocross category, 10% below the category average of 279 cc.
  • Seat height of 939 mm is taller than that of 99 of the other 199 bikes in the Cross / motocross category.
  • Narrowing the field to the 87 models within five model years of it, the engine displacement of 250 cc is larger than that of 48 of the other 86.

Versus the 2022 model

The figures we track are unchanged from the 2022 model: displacement and seat height all match.

2023 FC250 - Pros & Cons

Strengths

  • Strong front braking: The single disc front brake bites hard and stays consistent - a solid foundation whether it's stock or upgraded with braided lines.

Considerations

  • Carburetor fuelling: Carburetion is more hands-on than fuel injection - plan on periodic jetting and cleaning as part of routine ownership.
  • Tall seat height: A 939 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
  • Modest fuel capacity: A 7.20-litre tank keeps things light but means budgeting for more frequent fuel stops on any longer ride.
  • Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Carburetor maintenance

Being carbureted, the FC250 is more sensitive to stale fuel and altitude changes than a fuel-injected bike - a carb clean and rejet restores crisp throttle response after any extended lay-up.

Valve clearance checks

Valve clearances on Double Overhead Cams/Twin Cam (DOHC)-equipped engines like the FC250's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.

Brake disc and pad wear

Single disc with Brembo twin-piston floating calliper up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by WP XACT-USD, Ø 48 mm up front and WP XACT Monoshock with linkage at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the FC250 means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Central double-cradle-type 25CrMo4 steel chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

Low-speed handling

The FC250's 101.5 kg kerb weight makes low-speed control noticeably less effort than on a heavier machine.

FC250 - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2023 Husqvarna FC250 with its 249.9 cc cross / motocross should cover the same ground every time: service history, drivetrain condition, and any oil seepage around the casings. This model runs chain final drive, so check chain slack and sprocket tooth profile specifically - a worn sprocket is a cheaper fix now than after it's chewed up the next chain. Now 3 years old, this cross / motocross is as likely to show age-related wear (perished rubber, seized fasteners, degraded seals) as mileage-related wear. Start it from cold if you can - a well-kept FC250 settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for the FC250's 249.9 cc single cylinder, four-stroke - keep to the manufacturer's interval rather than stretching it. With a 14.5:1 compression ratio, running the octane grade specified in the manual matters more than on a lower-compression engine. Use the viscosity grade the manual specifies, not whatever's on sale.

Carburetor upkeep

An FC250 that's sat unused is almost always a carb-cleaning job before it runs right again - float bowls and pilot jets first, since they clog before anything else.

Valve clearance service

There's no reliable seat-of-the-pants way to tell if an FC250's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.

2023 Husqvarna FC250 - Frequently Asked Questions

What engine does the 2023 Husqvarna FC250 have?
The 2023 Husqvarna FC250 uses a Single cylinder, four-stroke engine with 249.9 cc of displacement.
How much does the 2023 Husqvarna FC250 weigh?
The 2023 Husqvarna FC250 weighs 101.5 kg. This is the manufacturer's dry figure.
What is the fuel tank capacity of the 2023 Husqvarna FC250?
The 2023 Husqvarna FC250 has a 7.20-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 120-144 km between stops.
Is the 2023 Husqvarna FC250 suitable for shorter riders?
The 2023 Husqvarna FC250 has a seat height of 939 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2023 Husqvarna FC250 have?
The 2023 Husqvarna FC250 uses single disc with Brembo twin-piston floating calliper at the front and single disc with Brembo single-piston floating calliper at the rear.
What tyre sizes does the 2023 Husqvarna FC250 use?
The front tyre size on the 2023 Husqvarna FC250 is 90/90-21.
What fuel system does the 2023 Husqvarna FC250 use?
The 2023 Husqvarna FC250 uses Carburettor, providing precise fuelling across the rev range and reliable cold-start behaviour.

Husqvarna FC250 Spec Evolution

The Husqvarna FC250 was produced across 9 model years (2014-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 2014 2016 2017 2018 2019 2020 2021 2022 2023
Dry Weight 104.1 kg / 229.5 lbs 101.1 kg / 222.9 lbs 98.8 kg / 217.8 lbs 98.8 kg / 217.8 lbs 99.5 kg / 219.4 lbs 99.5 kg / 219.4 lbs 99.5 kg / 219.4 lbs 99.5 kg / 219.4 lbs 101.5 kg / 223.8 lbs
Engine Detail Reed intake. - - - - - - - Titanium valves
Seat Height 992 mm / 39.1 in. 960 mm / 37.8 in. 960 mm / 37.8 in. 960 mm / 37.8 in. 950 mm / 37.4 in. 950 mm / 37.4 in. 940 mm / 37.0 in. 940 mm / 37.0 in. 939 mm / 37.0 in.
Fuel Capacity 7.50 litres / 1.98 gallons 7.00 litres / 1.85 gallons 7.00 litres / 1.85 gallons 7.00 litres / 1.85 gallons 7.00 litres / 1.85 US gallons 7.00 litres / 1.85 US gallons 7.00 litres / 1.85 US gallons 7.00 litres / 1.85 US gallons 7.20 litres / 1.90 US gallons
Ground Clearance (mm) 375 mm 370 mm 370 mm 370 mm 370 mm 370 mm 370 mm 370 mm 336 mm
Ground Clearance (in.) 14.8 inches 14.6 inches 14.6 inches 14.6 inches 14.6 inches 14.6 inches 14.6 inches 14.6 inches 13.2 inches
Fuel Control DOHC Double Overhead Cams/Twin Cam (DOHC) Double Overhead Cams/Twin Cam (DOHC) Double Overhead Cams/Twin Cam (DOHC) Double Overhead Cams/Twin Cam (DOHC) Double Overhead Cams/Twin Cam (DOHC) Double Overhead Cams/Twin Cam (DOHC) Double Overhead Cams/Twin Cam (DOHC) Double Overhead Cams/Twin Cam (DOHC)
Displacement (cc) 249.91 cc 249.91 cc 249.91 cc 249.91 cc 249.9 cc 249.9 cc 249.9 cc 249.9 cc 249.9 cc

Key Specifications

Engine

Single cylinder, four-stroke

Power

Not recorded

Torque

Not recorded

Top Speed

Not recorded

Weight

101.5 kg / 223.8 lbs

Fuel Capacity

7.20 litres / 1.90 US gallons

Advertisement

Full 2023 Husqvarna FC250 Specifications

Comments Traction control.
Colours White/yellow/grey
Ground Clearance (in.) 13.2 inches
Ground Clearance (mm) 336 mm
Seat Height 939 mm / 37.0 in.
Wheelbase 1482 mm / 58.3 in.
Length 2260 mm / 89.0 in.
Dry Weight 101.5 kg / 223.8 lbs
Fuel Capacity 7.20 litres / 1.90 US gallons
Maximum RPM 14000
Power-to-Weight Ratio 0.4532 HP/kg
Bore x Stroke (in,) 3.2 x 1.9 inches
Bore x Stroke (mm) 81.0 x 48.5 mm
Displacement (cc) 249.9 cc
Displacement (ci) 15.25 cubic inches
Engine Type Single cylinder, four-stroke
Fuel Control Double Overhead Cams/Twin Cam (DOHC)
Stroke 4-stroke
Engine Detail Titanium valves
Fuel System Carburettor
Compression Ratio 14.5:1
Ignition Hitachi Astemo EMS
Starter Electric
Clutch Wet multi-disc DS clutch, Brembo hydraulics
Final Drive Chain   (final drive)
Gearbox 5-speed
Primary Drive 5/8 x 1/4´ X-ring chain
Frame Type Central double-cradle-type 25CrMo4 steel
Suspension - Front WP XACT-USD, Ø 48 mm
Suspension - Rear WP XACT Monoshock with linkage
Rake 26.1°
Wheel Travel - Front 305 mm / 12.0 in.
Wheel Travel - Rear 293 mm / 11.5 in.
Brakes - Front Single disc. Brembo twin-piston floating calliper
Brakes - Rear Single disc. Brembo single-piston floating calliper
Rims Dunlop® Geomax MX33 tyres
Tyres - Front 90/90-21

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.

Advertisement