![]()
No images available
Tap to enlarge
![]()
2011 Honda CBF 600S Overview
For 2011, Honda offers the CBF 600S as an all-round motorcycle with 599.30 cc on tap. The 2011 Honda CBF 600S is built around an In-line four, four-stroke engine running DOHC valve actuation, a compression ratio of 11.6:1. Internally, bore and stroke are 67 x 42.5 mm. Out on the road, the CBF 600S delivers 59 Nm @ 8250 of torque. In everyday use, the 2011 CBF 600S tips the scales at 218 kg, carries a 20-litre fuel tank, offers a seat height of 770 mm and spans a 1,490 mm wheelbase. That's roughly 10.5 kg heavier than the average all-round motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2011 Honda CBF 600S spec sheet below.
2011 CBF 600S - Pros & Cons
Strengths
-
🔧
Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.
-
⛽
Large fuel range: With a 20-litre tank, this isn't a bike you'll be stopping for fuel every hour - a real asset on longer trips.
Considerations
-
⚙️
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.
Wear Points & Servicing Notes
Fuelling & injector care
Fuelling on the CBF 600S comes from fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.
Valve clearance checks
Valve clearances on DOHC-equipped engines like the CBF 600S's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.
Brake disc and pad wear
Double disc up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.
Suspension condition on used examples
Suspension duties are handled by 41mm telescopic fork, 120mm axle travel up front and Monoshock damper with 7-step adjustable preload, 125mm axle travel at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.
Final drive maintenance
Chain final drive on the CBF 600S means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.
Frame & chassis check
The Aluminium chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.
CBF 600S - Buying & Maintenance Guide
What to check before buying
A pre-purchase check on the 2011 Honda CBF 600S should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept CBF 600S settles to a smooth idle within seconds.
Oil and filter changes
Oil changes are the cheapest insurance you can buy for a CBF 600S's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.
Fuel system care
Injector systems like the CBF 600S's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.
Valve clearance service
There's no reliable seat-of-the-pants way to tell if a CBF 600S's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.
2011 Honda CBF 600S - Frequently Asked Questions
What engine does the 2011 Honda CBF 600S have?
The 2011 Honda CBF 600S uses an In-line four, four-stroke engine with 599.30 cc of displacement.
How much does the 2011 Honda CBF 600S weigh?
The 2011 Honda CBF 600S weighs 218 kg. This is the manufacturer's dry figure.
How much power does the 2011 Honda CBF 600S make?
The 2011 Honda CBF 600S produces 59 Nm @ 8250 of torque.
What is the fuel tank capacity of the 2011 Honda CBF 600S?
The 2011 Honda CBF 600S has a 20-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 333-400 km between stops.
Is the 2011 Honda CBF 600S suitable for shorter riders?
The 2011 Honda CBF 600S has a seat height of 770 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2011 Honda CBF 600S have?
The 2011 Honda CBF 600S uses Double disc at the front and Single disc at the rear.
What tyre sizes does the 2011 Honda CBF 600S use?
The 2011 Honda CBF 600S runs 120/70-ZR17 front and 160/60-ZR17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
Honda CBF 600S Spec Evolution
The Honda CBF 600S was produced across 7 model years (2005-2012). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2005 |
2007 |
2008 |
2009 |
2010 |
2011 |
2012 |
| Dry Weight |
197 kg / 434.3 lbs |
218 kg / 480 lbs |
222 kg / 489.4 lbs |
222 kg / 489.4 lbs |
222 kg / 489.4 lbs |
218 kg / 480.6 lbs |
88 kg / 194.0 lbs |
| Engine Type |
In-line four |
In-line four |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
| Seat Height |
785 mm / 30.9 in. |
785 mm / 30.9 in |
- |
785 mm / 30.9 in. |
785 mm / 30.9 in |
770 mm / 30.3 in. |
770 mm / 30.3 in. |
| Fuel Capacity |
19.00 litres / 5.02 gallons |
19.00 litres / 5.02 gallons |
20.00 litres / 5.28 gallons |
20.00 litres / 5.28 gallons |
20 Liters / 5.2 US gal |
20.00 litres / 5.28 gallons |
20.00 litres / 5.28 gallons |
| Displacement (ci) |
36.55 cubic inches |
36.61 cubic inches |
36.57 cubic inches |
36.57 cubic inches |
- |
36.57 cubic inches |
36.57 cubic inches |
| Displacement (cc) |
599.00 cc |
600.00 cc |
599.30 cc |
599.30 cc |
- |
599.30 cc |
599.30 cc |
| Bore x Stroke (mm) |
65.0 x 45.0 mm |
65.0 x 45.2 mm |
- |
67.0 x 42.5 mm |
- |
67.0 x 42.5 mm |
67.0 x 42.5 mm |
| Bore x Stroke (in,) |
2.6 x 1.8 inches |
2.6 x 1.8 inches |
- |
2.6 x 1.7 inches |
- |
2.6 x 1.7 inches |
2.6 x 1.7 inches |
Key Specifications
Engine
In-line four, four-stroke
Power
Not published by manufacturer
Torque
59.00 Nm (6.0 kgf-m or 43.5 ft.lbs) @ 8250
Top Speed
Not published by manufacturer
Weight
218 kg / 480.6 lbs
Fuel Capacity
20.00 litres / 5.28 gallons
Advertisement
Full 2011 Honda CBF 600S Specifications
Colours
Black, red/black, white/black, gold/black
Seat Heigth -Alternate (mm)
800 mm
Seat Heigth -Alternate (in.)
31.5 inches
Ground Clearance (mm)
130 mm
Ground Clearance (in.)
5.1 inches
Seat Height
770 mm / 30.3 in.
Wheelbase
1,490 mm / 58.7 in.
Height
1,240 mm / 48.8 in.
Length
2,160 mm / 85.0 in.
Width
765 mm / 30.1 in.
Dry Weight
218 kg / 480.6 lbs
Fuel Capacity
20.00 litres / 5.28 gallons
Fuel Control
DOHC
Bore x Stroke (in,)
2.6 x 1.7 inches
Bore x Stroke (mm)
67.0 x 42.5 mm
Engine Type
In-line four, four-stroke
Displacement (ci)
36.57 cubic inches
Displacement (cc)
599.30 cc
Fuel System
Injection
Compression Ratio
11.6:1
Fuel Reserve
4.00 litres / 1.06 gallons
Ignition
Computer-controlled digital transistorised with electronic advance
Starter
Electric
Valve System
4
Clutch
Wet, multiplate
Final Drive
Chain
Gearbox
6-speed
Primary Drive
O-ring Sealed chain
Frame Type
Aluminium
Suspension - Front
41mm telescopic fork, 120mm axle travel
Suspension - Rear
Monoshock damper with 7-step adjustable preload, 125mm axle travel
Wheel Travel - Front
300 mm / 11.8 in.
Brakes - Rear Diameter (mm)
240 mm
Brakes - Rear Diameter (in.)
9.4 inches
Brakes - Front Diameter (mm)
296 mm
Brakes - Front Diameter (in.)
11.7 inches
Brakes - Front
Double disc
Brakes - Rear
Single disc
Rims
U-section twin 6-spoke cast aluminium
Tyres - Front
120/70-ZR17
Tyres - Rear
160/60-ZR17
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement