1984 BMW R80 Specifications

Name: 1984 BMW R80
Brand: BMW

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

1984 BMW R80 Overview

The 1984 BMW R80 is a sport motorcycle built around 797 cc of displacement. Under the tank sits a Two cylinder boxer engine running OHV valve actuation, a compression ratio of 8.2:1. The bore and stroke measures 84.8 x 70.6 mm. 1984 BMW R80 delivers. The factory-quoted top speed stands at 181 km/h, making it a capable performer in its class. From a practical standpoint, the 1984 R80 tips the scales at 207 kg and carries a 22-litre fuel tank. Scroll down for the complete 1984 BMW R80 spec sheet covering every technical detail from suspension travel to tyre sizes.

1984 R80 - Pros & Cons

Strengths

Large fuel range: The 22-litre tank is generously sized, translating to extended range between stops - ideal for touring or longer commutes.
Low-maintenance final drive: Shaft drive (cardan) final drive means no chain to clean, lube or adjust - meaningfully less routine maintenance than a chain-driven equivalent.

Considerations

Age-related wear: As with any used R80, a thorough pre-purchase inspection covering consumables, service history and tyres is always recommended.

Wear Points & Servicing Notes

Brake disc and pad wear

The Single disc front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Final drive maintenance

Final drive is by shaft - no chain or belt maintenance at all, though the drive-shaft oil should be changed on the manufacturer's interval.

R80 - Buying & Maintenance Guide

What to check before buying

When inspecting a used 1984 BMW R80, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained R80 should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any R80. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

1984 BMW R80 - Frequently Asked Questions

What engine does the 1984 BMW R80 have?

The 1984 BMW R80 uses a Two cylinder boxer engine with 797 cc of displacement.

What is the top speed of the 1984 BMW R80?

The 1984 BMW R80 has a factory-quoted top speed of 181 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.

How much does the 1984 BMW R80 weigh?

The 1984 BMW R80 weighs 207 kg. This is the manufacturer's wet figure.

What is the fuel tank capacity of the 1984 BMW R80?

The 1984 BMW R80 has a 22-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 366-440 km between stops.

What brakes does the 1984 BMW R80 have?

The 1984 BMW R80 uses Single disc at the front and Expanding brake at the rear.

What tyre sizes does the 1984 BMW R80 use?

The 1984 BMW R80 runs 90/90-18 front and 120/90-18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What is the compression ratio of the 1984 BMW R80?

The 1984 BMW R80 runs a compression ratio of 8.2:1. Always use the minimum octane rating specified in the owner's manual.

BMW R80 Spec Evolution

The BMW R80 was produced across 11 model years (1984-1994). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	1984	1985	1986	1987	1988	1989	1990	1991	1992	1993	1994
Wet Weight	207.0 kg / 456.4 lbs	207.0 kg / 456.4 lbs	207.0 kg / 456.4 lbs	207.0 kg / 456.4 lbs	207.0 kg / 456.4 lbs	207.0 kg / 456.4 lbs	210.0 kg / 463.0 lbs	210.0 kg / 463.0 lbs	210.0 kg / 463.0 lbs	-	-
Engine Type	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer	Two cylinder boxer, four-stroke
Top Speed	181.0 km/h / 112.5 mph	181.0 km/h / 112.5 mph	181.0 km/h / 112.5 mph	181.0 km/h / 112.5 mph	181.0 km/h / 112.5 mph	181.0 km/h / 112.5 mph	177.0 km/h / 110.0 mph	177.0 km/h / 110.0 mph	177.0 km/h / 110.0 mph	-	-
Max Torque	-	-	-	-	-	-	-	-	-	57.86	49.03 Nm (5.0 kgf-m or 36.2 ft.lbs) @ 3750
Power-to-Weight Ratio	-	-	-	-	-	-	-	-	-	0.2632 HP/kg	0.2737 HP/kg

Key Specifications

Engine

Two cylinder boxer

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

181.0 km/h / 112.5 mph

Weight

207.0 kg / 456.4 lbs

Fuel Capacity

22.00 litres / 5.81 gallons

Full 1984 BMW R80 Specifications

Fuel Capacity 22.00 litres / 5.81 gallons

Wet Weight 207.0 kg / 456.4 lbs

Top Speed 181.0 km/h / 112.5 mph

Bore x Stroke (in,) 3.3 x 2.8 inches

Bore x Stroke (mm) 84.8 x 70.6 mm

Displacement (cc) 797.00 cc

Displacement (ci) 48.63 cubic inches

Engine Type Two cylinder boxer

Fuel Control OHV

Stroke 4

Compression Ratio 8.2:1

Valve System 2

Final Drive Shaft drive (cardan)

Gearbox 5-speed

Brakes - Front Single disc

Brakes - Rear Expanding brake

Tyres - Front 90/90-18

Tyres - Rear 120/90-18

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.