![]()
No images available
Tap to enlarge
![]()
2011 Vespa LX 50 2T Overview
Vespa LX 50 2T is a scooter motorcycle, displacing 49.40 cc. Power comes from a Single cylinder, two-stroke engine running SOHC valve actuation. Bore and stroke come in at 39.1 x 41.4 mm. On the performance side, it delivers 3.30 Nm @ 6500 of torque. Top speed is factory-quoted at 62.8 km/h. On the road, the 2011 LX 50 2T tips the scales at 102 kg, carries a 1,665 litres fuel tank and offers a seat height of 810 mm. That's roughly 95.7 kg lighter than the average scooter motorcycle in our database. The full 2011 Vespa LX 50 2T spec sheet below covers every technical detail, from suspension travel to tyre sizes.
2011 LX 50 2T - Pros & Cons
Strengths
-
🔧
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.
-
⚙️
Low-maintenance final drive: Running Belt final drive cuts out the regular chain cleaning and tensioning that most bikes need.
Considerations
-
⛽
Modest fuel capacity: Range between stops is limited by the 1,665 litres tank - plan fuel stops accordingly on longer routes.
Wear Points & Servicing Notes
Fuelling & injector care
The fuel injection on the LX 50 2T needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.
Valve clearance checks
With SOHC valve gear, the LX 50 2T needs periodic clearance checks; caught early they're a cheap adjustment, left unchecked they accelerate valve seat wear.
Brake disc and pad wear
Braking up front comes from Single disc - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.
Suspension condition on used examples
The LX 50 2T's suspension runs Single sided trailing link with hydraulic shock absorber at the front. The rear uses Hydraulic shock absorber. Fork-seal condition and rear linkage play are the two things worth checking before buying used.
Final drive maintenance
The LX 50 2T runs belt final drive: no lubrication or frequent adjustment like a chain, though belt tension and wear are worth a periodic look.
Frame & chassis check
Built around a Load-bearing steel chassis with welded structural supports, the LX 50 2T's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.
Low-speed handling
102 kg keeps the LX 50 2T easy to move around in tight spaces, car parks and on the stand alike.
LX 50 2T - Buying & Maintenance Guide
What to check before buying
Before handing over money for a used 2011 Vespa LX 50 2T, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy LX 50 2T should catch quickly and settle into a smooth idle.
Oil and filter changes
Nothing protects a LX 50 2T's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.
Fuel system care
Fuel injection on the LX 50 2T needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.
Valve clearance service
Valve clearances are easy to overlook on a used LX 50 2T since a bike out of spec doesn't always feel obviously wrong - but the wear it causes is real. Ask the seller for documentation before assuming it's been done.
2011 Vespa LX 50 2T - Frequently Asked Questions
What engine does the 2011 Vespa LX 50 2T have?
The 2011 Vespa LX 50 2T uses a Single cylinder, two-stroke engine with 49.40 cc of displacement.
What is the top speed of the 2011 Vespa LX 50 2T?
The 2011 Vespa LX 50 2T has a factory-quoted top speed of 62.8 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.
How much does the 2011 Vespa LX 50 2T weigh?
The 2011 Vespa LX 50 2T weighs 102 kg. This is the manufacturer's dry figure.
How much power does the 2011 Vespa LX 50 2T make?
The 2011 Vespa LX 50 2T produces 3.30 Nm @ 6500 of torque.
What is the fuel tank capacity of the 2011 Vespa LX 50 2T?
The 2011 Vespa LX 50 2T has a 1,665 litres fuel tank. At around 5-6 litres per 100 km, that is roughly 16-20 km between stops.
Is the 2011 Vespa LX 50 2T suitable for shorter riders?
The 2011 Vespa LX 50 2T has a seat height of 810 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2011 Vespa LX 50 2T have?
The 2011 Vespa LX 50 2T uses Single disc at the front and Expanding brake at the rear.
What tyre sizes does the 2011 Vespa LX 50 2T use?
The 2011 Vespa LX 50 2T runs 110/70-11 front and 120/70-10 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
Vespa LX 50 2T Spec Evolution
The Vespa LX 50 2T was produced across 4 model years (2009-2013). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2009 |
2010 |
2011 |
2013 |
| Dry Weight |
102 kg / 224.9 lbs |
102 kg / 224.9 lbs |
102 kg / 224.9 lbs |
210.5 kg / 464.1 lbs |
| Engine Type |
Single cylinder |
Single cylinder, four-stroke |
Single cylinder, two-stroke |
Single cylinder, two-stroke |
| Fuel Capacity |
- |
- |
1,665.00 litres / 439.89 gallons |
16.65 litres / 4.40 gallons |
| Fuel System |
Injection |
Injection |
Injection |
Carburettor |
| Colours |
Blu Midnight, Nero Grafite, Cortina, Capri |
Blu Midnight, Rosso Dragon, Capri, Nero Vulcano, Pink |
Blu Midnight, Rosso Dragon, Capri, Nero Vulcano, Pink |
Rosso Dragon, Nero Lucido, Blu Midnight, Celeste Glamour |
| Height |
- |
- |
1,089 mm / 42.9 in. |
1,140 mm / 44.9 in. |
| Warranty |
- |
- |
1 year/5000 miles limited warranty. |
One year limited |
| Tyres - Rear |
120/70-11 |
120/70-10 |
120/70-10 |
120/70-10 |
Key Specifications
Engine
Single cylinder, two-stroke
Power
Not published by manufacturer
Torque
3.30 Nm (0.3 kgf-m or 2.4 ft.lbs) @ 6500
Top Speed
62.8 km/h / 39.0 mph
Weight
102 kg / 224.9 lbs
Fuel Capacity
1,665.00 litres / 439.89 gallons
Advertisement
Full 2011 Vespa LX 50 2T Specifications
Colours
Blu Midnight, Rosso Dragon, Capri, Nero Vulcano, Pink
Warranty
1 year/5000 miles limited warranty.
Seat Height
810 mm / 31.9 in.
Height
1,089 mm / 42.9 in.
Length
1,755 mm / 69.1 in.
Width
740 mm / 29.1 in.
Dry Weight
102 kg / 224.9 lbs
Fuel Capacity
1,665.00 litres / 439.89 gallons
Bore x Stroke (in,)
1.5 x 1.6 inches
Bore x Stroke (mm)
39.1 x 41.4 mm
Displacement (cc)
49.40 cc
Displacement (ci)
3.01 cubic inches
Engine Type
Single cylinder, two-stroke
Fuel Control
SOHC
Fuel System
Injection
Engine Lubrication
Wet sump,
Exhaust
Euro 2
Ignition
CDI
Starter
Electric & kick
Valve System
2
Final Drive
Belt
Gearbox
Automatic
Primary Drive
With reverse
Frame Type
Load-bearing steel chassis with welded structural supports
Suspension - Front
Single sided trailing link with hydraulic shock absorber
Suspension - Rear
Hydraulic shock absorber
Brakes - Front Diameter (in.)
7.9 inches
Brakes - Front Diameter (mm)
200 mm
Brakes - Rear Diameter (in.)
4.3 inches
Brakes - Rear Diameter (mm)
110 mm
Brakes - Front
Single disc
Brakes - Rear
Expanding brake (drum brake)
Tyres - Front
110/70-11
Tyres - Rear
120/70-10
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement