![]()
No images available
Tap to enlarge
![]()
2017 Moto Guzzi Audace Overview
Moto Guzzi Audace is a custom / cruiser motorcycle, displacing 1380 cc. Power comes from a Four stroke, 90° V-twin, SOHC, 4 valves per cylinder engine, a compression ratio of 10.5:1. On the performance side, it delivers 71 kW @ 6500 rpm of peak power and 121 Nm @ 3000 rpm of torque. On the road, the 2017 Audace tips the scales at 299 kg, carries a 20.5-litre fuel tank, offers a seat height of 740 mm and spans a 1685 mm wheelbase. The full 2017 Moto Guzzi Audace spec sheet below covers every technical detail, from suspension travel to tyre sizes.
2017 Audace - Pros & Cons
Strengths
-
⚡
Strong power output: With 71 kW @ 6500 rpm and 121 Nm @ 3000 rpm of torque on tap, the Audace is no slouch for its class.
-
🔧
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.
-
📏
Accessible seat height: A 740 mm seat height keeps this manageable for most riders, which helps confidence at parking-lot speeds.
-
⛽
Large fuel range: A 20.5-litre tank means fewer stops on longer rides - a genuine plus for touring or a lengthy daily commute.
-
⚙️
Low-maintenance final drive: Running Shaft final drive cuts out the regular chain cleaning and tensioning that most bikes need.
Considerations
-
ℹ️
Age-related wear: Nothing specific stands out as a weak point on the Audace - the usual used-bike checks (service history, consumables, tyres) apply.
Wear Points & Servicing Notes
Heat management in traffic
Because the Audace relies on airflow rather than a coolant jacket, expect noticeably more radiant heat at low speed and in traffic. It's inherent to air cooling, and ventilated gear largely offsets it.
Fuelling & injector care
The Phased electronic multipoint sequential injection on the Audace needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.
Brake disc and pad wear
Braking up front comes from 2 x Ø320 mm stainless steel floating discs, Brembo radial calipers with 4 horizontally opposed pistons - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.
Suspension condition on used examples
The Audace's suspension runs Standard fork, ø45 mm, with radial caliper mounting bracket at the front. The rear uses Swingarm with double shock absorber with adjustable extension and spring preload with remote tank. Fork-seal condition and rear linkage play are the two things worth checking before buying used.
Final drive maintenance
The Audace uses shaft final drive: essentially maintenance-free day to day, with periodic gear-oil changes the only real service item.
Frame & chassis check
Built around a Steel tubing, closed double cradle with elastic kinematic engine mounting system to isolate vibrations., the Audace's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.
Handling the weight at a standstill
299 kg puts the Audace toward the heavier end of its class. It's most noticeable at walking pace; once underway the mass settles into the handling rather than fighting it.
Audace - Buying & Maintenance Guide
What to check before buying
Before handing over money for a used 2017 Moto Guzzi Audace, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy Audace should catch quickly and settle into a smooth idle.
Oil and filter changes
Nothing protects a Audace's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.
Fuel system care
Fuel injection on the Audace needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.
2017 Moto Guzzi Audace - Frequently Asked Questions
What engine does the 2017 Moto Guzzi Audace have?
The 2017 Moto Guzzi Audace uses a Four stroke, 90° V-twin, SOHC, 4 valves per cylinder engine with 1380 cc of displacement. It is air and oil cooled.
How much does the 2017 Moto Guzzi Audace weigh?
The 2017 Moto Guzzi Audace weighs 299 kg. This is the manufacturer's wet figure.
How much power does the 2017 Moto Guzzi Audace make?
The 2017 Moto Guzzi Audace produces 71 kW @ 6500 rpm of power and 121 Nm @ 3000 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2017 Moto Guzzi Audace?
The 2017 Moto Guzzi Audace has a 20.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 341-410 km between stops.
Is the 2017 Moto Guzzi Audace suitable for shorter riders?
The 2017 Moto Guzzi Audace has a seat height of 740 mm. This is a comfortable, accessible height for most riders.
What brakes does the 2017 Moto Guzzi Audace have?
The 2017 Moto Guzzi Audace uses 2 x Ø320 mm stainless steel floating discs, Brembo radial calipers with 4 horizontally opposed pistons at the front and Single Ø282 mm stainless steel fixed disc, Brembo floating caliper with 2 parallel pistons at the rear.
What tyre sizes does the 2017 Moto Guzzi Audace use?
The 2017 Moto Guzzi Audace runs 130/70 R18 front and 200/60 R16 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2017 Moto Guzzi Audace have?
The 2017 Moto Guzzi Audace is fitted with a 6 speed with final overdrive transmission.
Key Specifications
Engine
Four stroke, 90° V-twin, SOHC, 4 valves per cylinder
Power
71 kW / 96 hp @ 6500 rpm
Torque
121 Nm / 12.3 kgf-m / 89.2 ft/lb @ 3000 rpm
Top Speed
Not published by manufacturer
Fuel Capacity
20.5 Litres / 4.7 US gal
Advertisement
Full 2017 Moto Guzzi Audace Specifications
Year
2017
Make Model
Moto Guzzi Audace
Seat Height
740 mm / 29.1 in (Optimal 720 mm / 28.3 in)
Wheelbase
1685 mm / 66.3 in
Ground Clearance
165 mm / 6.4 in
Height
1180 mm / 46.5 in
Length
2445 mm / 90.2 in
Width
940 mm / 37.0 in
Fuel Capacity
20.5 Litres / 4.7 US gal
Wet Weight
299 kg / 659 lbs
Displacement
1380 cc / 84.2 cu-in
Engine Detail
Four stroke, 90° V-twin, SOHC, 4 valves per cylinder
Fuel System
Phased electronic multipoint sequential injection, Magneti Marelli IAW7SM; Øride by wireØ Ø 52 mm throttle body, IWP 243 Magneti Marelli injectors, double oxygen sensor, integrated management of 3 engine mappings, traction control, cruise control
Bore x Stroke
104 x 81.2 mm
Compression Ratio
10.5:1
Cooling System
Air and oil cooled
Exhaust
Stainless steel, 2-in-2 type, three-way catalytic converter with double oxygen sensor, Euro 4
Fuel Reserve
5 Litres / 1.3 US gal
Ignition
Electronic
Lubrication
Wet sump
Spark Plug
NGK LMAR8F, 2 per cylinder
Starter
Electric
Timing System Diagram
Intake valve opens 19° BTDC (1-mm checking clearance) intake valve closes 55° ABDC exhaust valve opens 49° BBDC exhaust valve closes 12° ATDC
Battery Capacity
12V - 18 Ah
Clutch
Single-disc with integrated anti-vibration buffer
Final Drive
Shaft
Final Drive Ratio
Double cardan joint and fixed bevel gear seat, drive ratio 10:36 = 1:3.6
Gear Ratios
1st 17:38 = 1:2.235 / 2nd 20:34 = 1:1.700 / 3rd 23:31 = 1:1.348 / 4th 26:29 = 1:1.115 / 5th 31:30 = 1:0.968 / 6th 30:24 = 1:0.8
Primary Drive
26:35 = 1:1.346
Transmission / Drive
6 speed with final overdrive
Frame Type
Steel tubing, closed double cradle with elastic kinematic engine mounting system to isolate vibrations.
Suspension - Front
Standard fork, ø45 mm, with radial caliper mounting bracket
Suspension - Rear
Swingarm with double shock absorber with adjustable extension and spring preload with remote tank
Rake
32°
Steering Angle
38°
Trail
155 mm / 6.1 in
Wheel Travel - Front
120 mm / 4.7 in
Wheel Travel - Rear
120 mm / 4.7 in
Brakes - Front
2 x Ø320 mm stainless steel floating discs, Brembo radial calipers with 4 horizontally opposed pistons
Brakes - Rear
Single Ø282 mm stainless steel fixed disc, Brembo floating caliper with 2 parallel pistons
Tyres - Front
130/70 R18
Tyres - Rear
200/60 R16
Wheels - Front
Aluminium alloy 3.50" x 18"
Wheels - Rear
Aluminium alloy 6.00" x 16"
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement