![]()
No images available
Tap to enlarge
![]()
2021 Indian Scout Bobber Overview
Indian Scout Bobber is a custom / cruiser motorcycle, displacing 1133 cc. Power comes from a Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder engine, a compression ratio of 10.7:1. On the performance side, it delivers 100 hp of peak power and 72.2 lb-ft @ 6000 rpm of torque. On the road, the 2021 Scout Bobber tips the scales at 251 kg, carries a 12.5-litre fuel tank, offers a seat height of 649 mm and spans a 1576 mm wheelbase. That's roughly 49.6 kg lighter than the average custom / cruiser motorcycle in our database. The full 2021 Indian Scout Bobber spec sheet below covers every technical detail, from suspension travel to tyre sizes.
2021 Scout Bobber - Pros & Cons
Strengths
-
⚡
Strong power output: With 100 hp and 72.2 lb-ft @ 6000 rpm of torque on tap, the Scout Bobber is no slouch for its class.
-
🔧
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.
-
📏
Accessible seat height: A 649 mm seat height keeps this manageable for most riders, which helps confidence at parking-lot speeds.
-
⚙️
Low-maintenance final drive: Running Belt, 2.357 : 1 final drive cuts out the regular chain cleaning and tensioning that most bikes need.
Considerations
-
ℹ️
Age-related wear: Nothing specific stands out as a weak point on the Scout Bobber - the usual used-bike checks (service history, consumables, tyres) apply.
Wear Points & Servicing Notes
Cooling system servicing
Scout Bobber's Liquid Cooled setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.
Fuelling & injector care
The fuel injection on the Scout Bobber needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.
Suspension condition on used examples
The Scout Bobber's suspension runs 41mm Telescopic fork - cartridge type at the front. The rear uses Dual shocks. Fork-seal condition and rear linkage play are the two things worth checking before buying used.
Final drive maintenance
The Scout Bobber runs belt final drive: no lubrication or frequent adjustment like a chain, though belt tension and wear are worth a periodic look.
Handling the weight at a standstill
251 kg puts the Scout Bobber toward the heavier end of its class. It's most noticeable at walking pace; once underway the mass settles into the handling rather than fighting it.
Scout Bobber - Buying & Maintenance Guide
What to check before buying
Before handing over money for a used 2021 Indian Scout Bobber, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy Scout Bobber should catch quickly and settle into a smooth idle.
Oil and filter changes
Nothing protects a Scout Bobber's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.
Fuel system care
Fuel injection on the Scout Bobber needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.
2021 Indian Scout Bobber - Frequently Asked Questions
What engine does the 2021 Indian Scout Bobber have?
The 2021 Indian Scout Bobber uses a Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder engine with 1133 cc of displacement. It is liquid cooled.
How much does the 2021 Indian Scout Bobber weigh?
The 2021 Indian Scout Bobber weighs 251 kg. This is the manufacturer's wet figure.
How much power does the 2021 Indian Scout Bobber make?
The 2021 Indian Scout Bobber produces 100 hp of power and 72.2 lb-ft @ 6000 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2021 Indian Scout Bobber?
The 2021 Indian Scout Bobber has a 12.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 208-250 km between stops.
Is the 2021 Indian Scout Bobber suitable for shorter riders?
The 2021 Indian Scout Bobber has a seat height of 649 mm. This is a comfortable, accessible height for most riders.
What brakes does the 2021 Indian Scout Bobber have?
The 2021 Indian Scout Bobber uses Single 298 mm rotor with 2 piston caliper at the front and Single 298 mm rotor with 1 piston caliper at the rear.
What tyre sizes does the 2021 Indian Scout Bobber use?
The 2021 Indian Scout Bobber runs 130/90B16 76H front and 150/80B16 77H rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2021 Indian Scout Bobber have?
The 2021 Indian Scout Bobber is fitted with a 6 Speed sliding-mesh/foot shift transmission.
Indian Scout Bobber Spec Evolution
The Indian Scout Bobber was produced across 4 model years (2019-2025). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2019 |
2021 |
2024 |
2025 |
| Max Power |
100 hp / 74.5 kW @ 8100 rpm |
100 hp / 74.5 kW |
107 hp / 79 kW @ 7250 rpm |
85 hp / 62.5 kW |
| Wet Weight |
251 kg / 554 lbs |
251 kg / 555 lbs |
- |
243 kg / 536 lbs |
| Dry Weight |
242 kg / 533 lbs |
242 kg / 534 lbs |
237 kg / 522 lbs |
234 kg / 516 lbs |
| Engine Detail |
Four stroke, 60° V-Twin, DOHC, 4-Valves Per Cylinder, |
Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder |
Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder |
Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder |
| Seat Height |
649 mm / 25.6 in |
649 mm / 25.6 in |
649 mm / 25.5 in |
649 mm / 25.6 in |
| Fuel Capacity |
12.5 Litres / 3.3 gal |
12.5 Litres / 3.3 US gal |
13 Litres / 3.4 US gal |
13 Litres / 3.4 US gal |
| Displacement |
1133 cc / 69 cu in |
1133 cc / 69 cu-in |
1250 cc / 76 cu in |
999 cc / 60 cu in |
| Wheelbase |
1562 mm / 61.5 in |
1576 mm / 62 in |
1562 mm / 61.5 in |
1562 mm / 61.5 in |
Key Specifications
Engine
Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder
Torque
72.2 lb-ft / 97.7 Nm @ 6000 rpm
Top Speed
Not published by manufacturer
Fuel Capacity
12.5 Litres / 3.3 US gal
Advertisement
Full 2021 Indian Scout Bobber Specifications
Year
2020 - 21
Make Model
Indian Scout Bobber
Seat Height
649 mm / 25.6 in
Wheelbase
1576 mm / 62 in
Ground Clearance
130 mm / 5.1 in
Height
1053 mm / 41.5 in
Length
2223 mm / 87.5 in
Width
926 mm / 36.5 in
Dry Weight
242 kg / 534 lbs
Fuel Capacity
12.5 Litres / 3.3 US gal
Maximum Load / GVWR
449 kg / 988 lbs
Wet Weight
251 kg / 555 lbs
Displacement
1133 cc / 69 cu-in
Engine Detail
Four stroke, 60° V-Twin, DOHC, 4 valves per cylinder
Bore x Stroke
99 x 73.6mm
Compression Ratio
10.7:1
Cooling System
Liquid Cooled
Exhaust
Split dual exhaust with crossover
Fuel Induction
Electronic fuel injection, closed loop / 60 mm bore
Lubrication
Semi-Dry Sump
Starter
Electric
Clutch
Wet, multi-plate
Final Drive
Belt, 2.357 : 1
Gear Ratios
1st 10.926 : 1 / 2nd 7.427 : 1 / 3rd 5.918 : 1 / 4th 5.022 : 1 / 5th 4.439 : 1 / 6th 3.810 : 1
Primary Drive
Gear drive wet clutch
Transmission / Drive
6 Speed sliding-mesh/foot shift
Suspension - Front
41mm Telescopic fork - cartridge type
Suspension - Rear
Dual shocks
Rake
29°
Trail
120 mm / 4.7 in
Wheel Travel - Front
120 mm / 4.7 in
Wheel Travel - Rear
51 mm / 2.0 in
Brakes - Front
Single 298 mm rotor with 2 piston caliper
Brakes - Rear
Single 298 mm rotor with 1 piston caliper
Tyres - Front
130/90B16 76H
Tyres - Rear
150/80B16 77H
Wheels - Front
Cast black 16 in x 3.5 in
Wheels - Rear
Cast black 16 in x 3.5 in
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement