![]()
No images available
Tap to enlarge
![]()
2023 Husqvarna TE 300 Overview
Husqvarna TE 300 is an enduro / off-road motorcycle, displacing 293.2 cc. Power comes from a Single cylinder, two-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation. Bore and stroke come in at 72 x 72 mm. On the road, the 2023 TE 300 tips the scales at 106.4 kg, carries a 9-litre fuel tank, offers a seat height of 950 mm and spans a 1482 mm wheelbase. That's roughly 92.4 kg lighter than the average enduro / off-road motorcycle in our database. The full 2023 Husqvarna TE 300 spec sheet below covers every technical detail, from suspension travel to tyre sizes.
2023 TE 300 - Pros & Cons
Strengths
-
🔧
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.
Considerations
-
📏
Tall seat height: At 950 mm, shorter riders will likely be on tiptoes at a standstill - worth sitting on one before you buy.
-
⛽
Modest fuel capacity: Range between stops is limited by the 9-litre tank - plan fuel stops accordingly on longer routes.
-
⚙️
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.
Wear Points & Servicing Notes
Fuelling & injector care
The fuel injection on the TE 300 needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.
Valve clearance checks
With Double Overhead Cams/Twin Cam (DOHC) valve gear, the TE 300 needs periodic clearance checks; caught early they're a cheap adjustment, left unchecked they accelerate valve seat wear.
Brake disc and pad wear
Braking up front comes from Single disc. Wave disk. - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.
Suspension condition on used examples
The TE 300's suspension runs WP XPLOR-USD, Ø 48 mm at the front. The rear uses WP XACT Monoshock with linkage. Fork-seal condition and rear linkage play are the two things worth checking before buying used.
Final drive maintenance
The TE 300 uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.
Frame & chassis check
Built around a Central double-cradle-type 25CrMo4 steel, the TE 300's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.
Low-speed handling
106.4 kg keeps the TE 300 easy to move around in tight spaces, car parks and on the stand alike.
TE 300 - Buying & Maintenance Guide
What to check before buying
Before handing over money for a used 2023 Husqvarna TE 300, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy TE 300 should catch quickly and settle into a smooth idle.
Oil and filter changes
Nothing protects a TE 300's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.
Fuel system care
Fuel injection on the TE 300 needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.
Valve clearance service
Valve clearances are easy to overlook on a used TE 300 since a bike out of spec doesn't always feel obviously wrong - but the wear it causes is real. Ask the seller for documentation before assuming it's been done.
2023 Husqvarna TE 300 - Frequently Asked Questions
What engine does the 2023 Husqvarna TE 300 have?
The 2023 Husqvarna TE 300 uses a Single cylinder, two-stroke engine with 293.2 cc of displacement.
How much does the 2023 Husqvarna TE 300 weigh?
The 2023 Husqvarna TE 300 weighs 106.4 kg. This is the manufacturer's dry figure.
What is the fuel tank capacity of the 2023 Husqvarna TE 300?
The 2023 Husqvarna TE 300 has a 9-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 150-180 km between stops.
Is the 2023 Husqvarna TE 300 suitable for shorter riders?
The 2023 Husqvarna TE 300 has a seat height of 950 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2023 Husqvarna TE 300 have?
The 2023 Husqvarna TE 300 uses Single disc. Wave disk. at the front and Single disc. Wave disk. at the rear.
What tyre sizes does the 2023 Husqvarna TE 300 use?
The front tyre size on the 2023 Husqvarna TE 300 is 90/90-21.
What fuel system does the 2023 Husqvarna TE 300 use?
The 2023 Husqvarna TE 300 uses Injection. 39 mm, providing precise fuelling across the rev range and reliable cold-start behaviour.
Husqvarna TE 300 Spec Evolution
The Husqvarna TE 300 was produced across 4 model years (2015-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2015 |
2017 |
2019 |
2023 |
| Dry Weight |
102.4 kg / 225.8 lbs |
102.4 kg / 225.8 lbs |
102.4 kg / 225.8 lbs |
106.4 kg / 234.6 lbs |
| Engine Detail |
Two stroke, single cylinder with reed intake and exhaust control |
Two stroke, single cylinder with reed intake and exhaust control |
Two stroke, single cylinder with reed intake and exhaust control |
- |
| Seat Height |
960 mm / 38.0 in |
960 mm / 38.0 in |
960 mm / 38.0 in |
950 mm / 37.4 in. |
| Fuel Capacity |
10 Litres / 2.6 US gal |
10 Litres / 2.6 US gal |
10 Litres / 2.6 US gal |
9.00 litres / 2.38 US gallons |
| Ground Clearance (mm) |
355 mm |
355 mm |
370 mm |
375 mm |
| Ground Clearance (in.) |
14.0 inches |
14.0 inches |
14.6 inches |
14.8 inches |
| Fuel Control |
DOHC |
Double Overhead Cams/Twin Cam (DOHC) |
Double Overhead Cams/Twin Cam (DOHC) |
Double Overhead Cams/Twin Cam (DOHC) |
| Brakes - Front Diameter (in.) |
10.2 inches |
10.2 inches |
10.2 inches |
- |
Key Specifications
Engine
Single cylinder, two-stroke
Power
Not published by manufacturer
Torque
Not published by manufacturer
Top Speed
Not published by manufacturer
Weight
106.4 kg / 234.6 lbs
Fuel Capacity
9.00 litres / 2.38 US gallons
Advertisement
Full 2023 Husqvarna TE 300 Specifications
Comments
Two engine maps
Colours
White/blue/yellow
Ground Clearance (in.)
14.8 inches
Ground Clearance (mm)
375 mm
Seat Height
950 mm / 37.4 in.
Wheelbase
1482 mm / 58.3 in.
Dry Weight
106.4 kg / 234.6 lbs
Fuel Capacity
9.00 litres / 2.38 US gallons
Stroke
2-stroke
Fuel Control
Double Overhead Cams/Twin Cam (DOHC)
Engine Type
Single cylinder, two-stroke
Displacement (ci)
17.89 cubic inches
Displacement (cc)
293.2 cc
Bore x Stroke (in,)
2.8 x 2.8 inches
Bore x Stroke (mm)
72.0 x 72.0 mm
CO2
64.7 CO2 g/km. (CO2 - Carbon dioxide emission)
Fuel System
Injection. 39 mm
Engine Lubrication
Mixture oil lubrication
Fuel Consumption
2.79 litres/100 km (35.8 km/l or 84.31 mpg)
Ignition
Continental EMS
Starter
Electric
Clutch
DDS wet multi-disc clutch, Braktec hydraulics
Final Drive
Chain (final drive)
Gearbox
6-speed
Primary Drive
X-Ring 5/8 x 1/4´ chain
Frame Type
Central double-cradle-type 25CrMo4 steel
Suspension - Front
WP XPLOR-USD, Ø 48 mm
Suspension - Rear
WP XACT Monoshock with linkage
Rake
26.5°
Trail
106 mm / 4.2 in.
Wheel Travel - Front
300 mm / 11.8 in.
Wheel Travel - Rear
300 mm / 11.8 in.
Brakes - Front
Single disc. Wave disk.
Brakes - Rear
Single disc. Wave disk.
Tyres - Front
90/90-21
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement