2023 Husqvarna FE 501 Specifications

Name: 2023 Husqvarna FE 501
Brand: Husqvarna

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2023 Husqvarna FE 501 Overview

The 2023 Husqvarna FE 501 is an enduro / off-road motorcycle built around 510.9 cc of displacement. Under the tank sits a Single cylinder, four-stroke engine running Single Overhead Cams (SOHC) valve actuation, a compression ratio of 12.2:1. The bore and stroke measures 95 x 72 mm. From a practical standpoint, the 2023 FE 501 tips the scales at 108.4 kg, carries a 9-litre fuel tank, offers a seat height of 950 mm and spans a 1482 mm wheelbase. That's roughly 90.4 kg lighter than the average enduro / off-road motorcycle in our database. Scroll down for the complete 2023 Husqvarna FE 501 spec sheet covering every technical detail from suspension travel to tyre sizes.

2023 FE 501 - Pros & Cons

Strengths

Fuel injection: The fuel injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.

Considerations

Tall seat height: The 950 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.
Modest fuel capacity: The 9-litre tank means more frequent fuel stops on longer rides, which is worth planning around on touring routes.
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.

Wear Points & Servicing Notes

Fuelling & injector care

Fuelling comes from fuel injection. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.

Valve clearance checks

Single Overhead Cams (SOHC) valve actuation on the FE 501 means clearances should be checked at the manufacturer's specified interval - they can tighten as mileage accumulates, and a light top-end tick is usually the first sign.

Brake disc and pad wear

The Single disc. Wave disk. front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Suspension condition on used examples

Up front, the FE 501 runs WP XPLOR-USD, Ø 48 mm and WP XACT Monoshock with linkage at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.

Frame & chassis check

The frame is Central double-cradle-type 25CrMo4 steel - worth a visual check for corrosion or impact damage around the head-stock and swingarm pivot on any used example, since frame damage is far costlier to fix than any service item.

Low-speed handling

At just 108.4 kg, the FE 501 is light enough to manhandle easily at a standstill - one of the practical advantages of its class.

FE 501 - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2023 Husqvarna FE 501, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained FE 501 should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any FE 501. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The FE 501's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used FE 501. A bike with clearances out of spec doesn't always feel obviously wrong - but tight clearances accelerate valve seat wear. Ask for service documentation proving it's been done.

2023 Husqvarna FE 501 - Frequently Asked Questions

What engine does the 2023 Husqvarna FE 501 have?

The 2023 Husqvarna FE 501 uses a Single cylinder, four-stroke engine with 510.9 cc of displacement.

How much does the 2023 Husqvarna FE 501 weigh?

The 2023 Husqvarna FE 501 weighs 108.4 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2023 Husqvarna FE 501?

The 2023 Husqvarna FE 501 has a 9-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 150-180 km between stops.

Is the 2023 Husqvarna FE 501 suitable for shorter riders?

The 2023 Husqvarna FE 501 has a seat height of 950 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2023 Husqvarna FE 501 have?

The 2023 Husqvarna FE 501 uses Single disc. Wave disk. at the front and Single disc. Wave disk. at the rear.

What tyre sizes does the 2023 Husqvarna FE 501 use?

The front tyre size on the 2023 Husqvarna FE 501 is 90/90-21.

What fuel system does the 2023 Husqvarna FE 501 use?

The 2023 Husqvarna FE 501 uses Injection, providing precise fuelling across the rev range and reliable cold-start behaviour.

Husqvarna FE 501 Spec Evolution

The Husqvarna FE 501 was produced across 8 model years (2015-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2015	2016	2017	2018	2019	2021	2022	2023
Dry Weight	113.5 kg / 250.2 lbs	111 kg / 244.7 lbs	111 kg / 244.7 lbs	111 kg / 244.7 lbs	111 kg / 244.7 lbs	108.4 kg / 239.0 lbs	111 kg / 244.7 lbs	108.4 kg / 239.0 lbs
Engine Detail	Four stroke. single cylinder. SOHC. 4 valve per cylinder	-	-	-	-	Four stroke. single cylinder. SOHC. 4 valve per cylinder	Four stroke. single cylinder. SOHC. 4 valve per cylinder	Titanium valves
Seat Height	970 mm / 38.2 in	970 mm / 38.2 in.	970 mm / 38.2 in.	970 mm / 38.2 in.	970 mm / 38.2 in.	970 mm / 38.2 in	970 mm / 38.2 in	950 mm / 37.4 in.
Fuel Capacity	9.5 Litres / 2.8 US gal	9.00 litres / 2.38 gallons	8.50 litres / 2.25 gallons	8.50 litres / 2.25 gallons	8.50 litres / 2.25 US gallons	8.50 litres / 2.25 US gallons	8.5 Litres / 2.25 US gal	9.00 litres / 2.38 US gallons
Ground Clearance (mm)	345 mm	345 mm	370 mm	370 mm	370 mm	360 mm	360 mm	360 mm
Ground Clearance (in.)	13.6 inches	13.6 inches	14.6 inches	14.6 inches	14.6 inches	14.2 inches	14.2 inches	14.2 inches
Fuel Control	SOHC	Single Overhead Cams (SOHC)	Single Overhead Cams (SOHC)	Single Overhead Cams (SOHC)	Single Overhead Cams (SOHC)	Single Overhead Cams (SOHC)	Single Overhead Cams (SOHC)	Single Overhead Cams (SOHC)
Displacement (ci)	-	31.14 cubic inches	31.14 cubic inches	31.14 cubic inches	31.18 cubic inches	31.14 cubic inches	-	31.18 cubic inches

Key Specifications

Engine

Single cylinder, four-stroke

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

Not published by manufacturer

Weight

108.4 kg / 239.0 lbs

Fuel Capacity

9.00 litres / 2.38 US gallons

Full 2023 Husqvarna FE 501 Specifications

Comments 2 engine maps. Traction control.

Colours White/blue/yellow

Ground Clearance (in.) 14.2 inches

Ground Clearance (mm) 360 mm

Seat Height 950 mm / 37.4 in.

Wheelbase 1482 mm / 58.3 in.

Dry Weight 108.4 kg / 239.0 lbs

Fuel Capacity 9.00 litres / 2.38 US gallons

Bore x Stroke (in,) 3.7 x 2.8 inches

Bore x Stroke (mm) 95.0 x 72.0 mm

CO2 84.0 CO2 g/km. (CO2 - Carbon dioxide emission)

Displacement (cc) 510.9 cc

Displacement (ci) 31.18 cubic inches

Engine Type Single cylinder, four-stroke

Fuel Control Single Overhead Cams (SOHC)

Engine Detail Titanium valves

Fuel System Injection

Compression Ratio 12.2:1

Fuel Consumption 3.62 litres/100 km (27.6 km/l or 64.98 mpg)

Ignition Hitachi Astemo EMS

Starter Electric

Valve System 4

Clutch DDS wet multi-disc clutch, Braktec hydraulics

Final Drive Chain (final drive)

Gearbox 6-speed

Primary Drive X-ring 5/8 x 1/4 in chain

Frame Type Central double-cradle-type 25CrMo4 steel

Suspension - Front WP XPLOR-USD, Ø 48 mm

Suspension - Rear WP XACT Monoshock with linkage

Rake 26.5°

Wheel Travel - Front 300 mm / 11.8 in.

Wheel Travel - Rear 300 mm / 11.8 in.

Brakes - Front Single disc. Wave disk.

Brakes - Rear Single disc. Wave disk.

Tyres - Front 90/90-21

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.