2013 Honda CRF250R Specifications

Name: 2013 Honda CRF250R
Brand: Honda

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2013 Honda CRF250R Overview

For 2013, Honda offers the CRF250R as an enduro / off-road motorcycle with 249 cc on tap. The 2013 Honda CRF250R is built around a Single cylinder, four-stroke engine running SOHC valve actuation, a compression ratio of 13.2:1. Internally, bore and stroke are 76.8 x 53.8 mm. Out on the road, the CRF250R delivers 14.10 Nm @ 11000 Revolutions of torque. In everyday use, the 2013 CRF250R tips the scales at 103 kg, carries a 5.68-litre fuel tank, offers a seat height of 950 mm and spans a 1,488 mm wheelbase. That's roughly 95.8 kg lighter than the average enduro / off-road motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2013 Honda CRF250R spec sheet below.

2013 CRF250R - Pros & Cons

Strengths

Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.

Considerations

Tall seat height: A 950 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Modest fuel capacity: A 5.68-litre tank keeps things light but means budgeting for more frequent fuel stops on any longer ride.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Fuelling & injector care

Fuelling on the CRF250R comes from fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.

Valve clearance checks

Valve clearances on SOHC-equipped engines like the CRF250R's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.

Brake disc and pad wear

Double disc. Two-piston calipers. up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by 48mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability up front and Pro-Link® Showa single shock with spring preload, 17-position rebound damping adjustability, and compression-damping adjustment separated into low-speed at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the CRF250R means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Semi-double cradle; steel tube chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

Low-speed handling

The CRF250R's 103 kg kerb weight makes low-speed control noticeably less effort than on a heavier machine.

CRF250R - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2013 Honda CRF250R should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept CRF250R settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a CRF250R's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Fuel system care

Injector systems like the CRF250R's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.

Valve clearance service

There's no reliable seat-of-the-pants way to tell if a CRF250R's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.

2013 Honda CRF250R - Frequently Asked Questions

What engine does the 2013 Honda CRF250R have?

The 2013 Honda CRF250R uses a Single cylinder, four-stroke engine with 249 cc of displacement.

How much does the 2013 Honda CRF250R weigh?

The 2013 Honda CRF250R weighs 103 kg. This is the manufacturer's wet figure.

How much power does the 2013 Honda CRF250R make?

The 2013 Honda CRF250R produces 14.10 Nm @ 11000 Revolutions of torque.

What is the fuel tank capacity of the 2013 Honda CRF250R?

The 2013 Honda CRF250R has a 5.68-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 94-113 km between stops.

Is the 2013 Honda CRF250R suitable for shorter riders?

The 2013 Honda CRF250R has a seat height of 950 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2013 Honda CRF250R have?

The 2013 Honda CRF250R uses Double disc. Two-piston calipers. at the front and Single disc at the rear.

What tyre sizes does the 2013 Honda CRF250R use?

The 2013 Honda CRF250R runs 80/100-21 front and 100/90-19 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

Honda CRF250R Spec Evolution

The Honda CRF250R was produced across 19 model years (2005-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2005	2006	2007	2008	2009	2010	2011	2012	2013	2014	2015	2016	2017	2018	2019	2020	2021	2022	2023
Wet Weight	-	-	-	-	-	102.5 kg / 226.0 lbs	103.0 kg / 227.0 lbs	103.9 kg / 229.0 lbs	103.0 kg / 227.0 lbs	104.8 kg / 231.0 lbs	104.8 kg / 231.0 lbs	104.8 kg / 231.0 lbs	104.8 kg / 231.0 lbs	108.0 kg / 238.0 lbs	108.0 kg / 238.0 lbs	107.5 kg / 237.0 lbs	107.5 kg / 237.0 lbs	104.0 kg / 229.3 lbs	104.0 kg / 229.3 lbs
Dry Weight	92.5 kg / 204.0 lbs	92.5 kg / 204.0 lbs	92.5 kg / 204.0 lbs	103 kg / 227.0 lbs	101.2 kg / 223.1 lbs	-	-	88 kg / 194.0 lbs	-	-	-	-	-	-	-	-	-	-	-
Engine Detail	-	-	-	-	-	-	-	Unicam&reg, four-valve; 30.5mm intake, titanium; 25mm exhaust, steel	-	-	-	-	-	33mm intake valve, titanium; 26mm exhaust, titanium	33mm intake valve, titanium; 26mm exhaust, titanium	33mm intake valve, titanium; 26mm exhaust, titanium	33mm intake valve, titanium; 26mm exhaust, titanium	33mm intake valve, titanium; 26mm exhaust, titanium	33mm intake valve, titanium; 26mm exhaust, titanium
Engine Type	Single cylinder	Single cylinder	Single cylinder	Single cylinder	Single cylinder	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke	Single cylinder, four-stroke
Seat Height	965 mm / 38.0 in.	965 mm / 38.0 in.	965 mm / 38.0 in.	965 mm / 38.0 in.	965 mm / 38.0 in.	955 mm / 37.6 in.	955 mm / 37.6 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	950 mm / 37.4 in.	960 mm / 37.8 in.	960 mm / 37.8 in.	960 mm / 37.8 in.	960 mm / 37.8 in.	955 mm / 37.6 in.	960 mm / 37.8 in.
Fuel Capacity	7.57 litres / 2.00 gallons	7.57 litres / 2.00 gallons	7.57 litres / 2.00 gallons	7.19 litres / 1.90 gallons	7.30 litres / 1.93 gallons	5.67 litres / 1.50 gallons	5.68 litres / 1.50 gallons	5.68 litres / 1.50 gallons	5.68 litres / 1.50 gallons	6.28 litres / 1.66 gallons	6.28 litres / 1.66 gallons	6.28 litres / 1.66 gallons	6.28 litres / 1.66 gallons	6.28 litres / 1.66 gallons	6.28 litres / 1.66 US gallons	6.06 litres / 1.60 US gallons	6.06 litres / 1.60 US gallons	6.30 litres / 1.66 US gallons	6.30 litres / 1.66 US gallons
Bore x Stroke (in,)	3.1 x 2.1 inches	3.1 x 2.1 inches	3.1 x 2.1 inches	3.1 x 2.1 inches	3.1 x 2.1 inches	3.0 x 2.1 inches	3.0 x 2.1 inches	3.0 x 2.1 inches	3.0 x 2.1 inches	3.0 x 2.1 inches	3.0 x 2.1 inches	3.0 x 2.1 inches	3.0 x 2.1 inches	3.1 x 2.0 inches	3.1 x 2.0 inches	3.1 x 2.0 inches	3.1 x 2.0 inches	3.1 x 2.0 inches	3.1 x 2.0 inches
Bore x Stroke (mm)	78.0 x 52.2 mm	78.0 x 52.2 mm	78.0 x 52.2 mm	78.0 x 52.2 mm	78.0 x 52.2 mm	76.8 x 53.8 mm	76.8 x 53.8 mm	76.8 x 53.8 mm	76.8 x 53.8 mm	76.8 x 53.8 mm	76.8 x 53.8 mm	76.8 x 53.8 mm	76.8 x 53.8 mm	79.0 x 50.9 mm	79.0 x 50.9 mm	79.0 x 50.9 mm	79.0 x 50.9 mm	79.0 x 50.9 mm	79.0 x 50.9 mm

Key Specifications

Engine

Single cylinder, four-stroke

Power

Not published by manufacturer

Torque

14.10 Nm (1.4 kgf-m or 10.4 ft.lbs) @ 11000 Revolutions

Top Speed

Not published by manufacturer

Weight

103.0 kg / 227.0 lbs

Fuel Capacity

5.68 litres / 1.50 gallons

Full 2013 Honda CRF250R Specifications

Comments Model ID: CRF250R

Colours Red

Ground Clearance (mm) 323 mm

Ground Clearance (in.) 12.7 inches

Seat Height 950 mm / 37.4 in.

Wheelbase 1,488 mm / 58.6 in.

Height 1,171 mm / 46.1 in.

Length 1,900 mm / 74.8 in.

Width 770 mm / 30.3 in.

Fuel Capacity 5.68 litres / 1.50 gallons

Wet Weight 103.0 kg / 227.0 lbs

Max Torque 14.10 Nm (1.4 kgf-m or 10.4 ft.lbs) @ 11000 Revolutions

Fuel Control SOHC

Engine Type Single cylinder, four-stroke

Displacement (ci) 15.19 cubic inches

Displacement (cc) 249.00 cc

Bore x Stroke (mm) 76.8 x 53.8 mm

Bore x Stroke (in,) 3.0 x 2.1 inches

Fuel System Injection. Programmed Fuel Injection (PGM-FI), 46mm throttle body

Compression Ratio 13.2:1

Emissions Consult owners manual for optional racing parts.

Ignition Full transistor with electronic advance

Starter Kick

Valve System 4

Final Drive Chain

Gearbox 5-speed

Primary Drive #520 Chain; 13T/49T

Frame Type Semi-double cradle; steel tube

Suspension - Front 48mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability

Suspension - Rear Pro-Link® Showa single shock with spring preload, 17-position rebound damping adjustability, and compression-damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.3 inches travel

Rake 27.0°

Trail 118 mm / 4.6 in.

Wheel Travel - Front 275 mm / 12.2 in.

Wheel Travel - Rear 282 mm / 11.1 in.

Brakes - Front Diameter (in.) 9.4 inches

Brakes - Front Diameter (mm) 240 mm

Brakes - Rear Diameter (in.) 9.4 inches

Brakes - Rear Diameter (mm) 240 mm

Brakes - Front Double disc. Two-piston calipers.

Brakes - Rear Single disc

Rims Aluminium rim/wire spoke

Tyres - Front 80/100-21

Tyres - Rear 100/90-19

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.