1989 Honda CBR 1000F Specifications

Name: 1989 Honda CBR 1000F
Brand: Honda

Sport touring • Specs last verified 13 July 2026

No images available

Tap to enlarge

1989 Honda CBR 1000F Overview

The 1989 Honda CBR 1000F is a sport touring motorcycle built around 998 cc of displacement. Under the tank sits an In-line four engine running DOHC valve actuation, a compression ratio of 10.5:1. The bore and stroke measures 77 x 53.6 mm. 1989 Honda CBR 1000F delivers. The factory-quoted top speed stands at 237 km/h, making it a capable performer in its class. From a practical standpoint, the 1989 CBR 1000F tips the scales at 262 kg and carries a 21-litre fuel tank. That's roughly 13.8 kg heavier than the average sport touring motorcycle in our database. Scroll down for the complete 1989 Honda CBR 1000F spec sheet covering every technical detail from suspension travel to tyre sizes.

1989 CBR 1000F - Pros & Cons

Strengths

Large fuel range: The 21-litre tank is generously sized, translating to extended range between stops - ideal for touring or longer commutes.

Considerations

Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.

Wear Points & Servicing Notes

Valve clearance checks

DOHC valve actuation on the CBR 1000F means clearances should be checked at the manufacturer's specified interval - they can tighten as mileage accumulates, and a light top-end tick is usually the first sign.

Brake disc and pad wear

The Dual disc front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Final drive maintenance

Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.

Handling the weight at a standstill

At 262 kg, the CBR 1000F is a substantial machine - low-speed manoeuvring in car parks takes more physical effort than on a lighter bike, though the weight disappears once rolling.

CBR 1000F - Buying & Maintenance Guide

What to check before buying

When inspecting a used 1989 Honda CBR 1000F, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained CBR 1000F should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any CBR 1000F. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used CBR 1000F. A bike with clearances out of spec doesn't always feel obviously wrong - but tight clearances accelerate valve seat wear. Ask for service documentation proving it's been done.

1989 Honda CBR 1000F - Frequently Asked Questions

What engine does the 1989 Honda CBR 1000F have?

The 1989 Honda CBR 1000F uses an In-line four engine with 998 cc of displacement.

What is the top speed of the 1989 Honda CBR 1000F?

The 1989 Honda CBR 1000F has a factory-quoted top speed of 237 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.

How much does the 1989 Honda CBR 1000F weigh?

The 1989 Honda CBR 1000F weighs 262 kg. This is the manufacturer's wet figure.

What is the fuel tank capacity of the 1989 Honda CBR 1000F?

The 1989 Honda CBR 1000F has a 21-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 350-420 km between stops.

What brakes does the 1989 Honda CBR 1000F have?

The 1989 Honda CBR 1000F uses Dual disc at the front and Single disc at the rear.

What tyre sizes does the 1989 Honda CBR 1000F use?

The 1989 Honda CBR 1000F runs 110/80-17 front and 140/80-17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What is the compression ratio of the 1989 Honda CBR 1000F?

The 1989 Honda CBR 1000F runs a compression ratio of 10.5:1. Always use the minimum octane rating specified in the owner's manual.

Honda CBR 1000F Spec Evolution

The Honda CBR 1000F was produced across 14 model years (1987-2000). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	1987	1988	1989	1990	1991	1992	1993	1994	1995	1996	1997	1998	1999	2000
Wet Weight	262.0 kg / 577.6 lbs	262.0 kg / 577.6 lbs	262.0 kg / 577.6 lbs	254.0 kg / 560.0 lbs	254.0 kg / 560.0 lbs	254.0 kg / 560.0 lbs	-	-	-	-	-	-	-	-
Dry Weight	222 kg / 489.4 lbs	222 kg / 489.4 lbs	-	-	-	-	235 kg / 518.1 lbs	235 kg / 518.1 lbs	235 kg / 518.1 lbs	235 kg / 518.1 lbs	235 kg / 518.1 lbs	235 kg / 518.1 lbs	235 kg / 518.1 lbs	235 kg / 518.1 lbs
Engine Type	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four	In-line four, four-stroke
Top Speed	258 km/h / 160.3 mph	258 km/h / 160.3 mph	237.0 km/h / 147.3 mph	235.0 km/h / 146.0 mph	235.0 km/h / 146.0 mph	235.0 km/h / 146.0 mph	-	-	-	-	255.0 km/h / 158.4 mph	255.0 km/h / 158.4 mph	260.0 km/h / 161.6 mph	260.0 km/h / 161.6 mph
Seat Height	775 mm / 30.5 in	775 mm / 30.5 in	-	-	-	-	775 mm / 30.5 in.	775 mm / 30.5 in.	780 mm / 30.7 in.	780 mm / 30.7 in.	780 mm / 30.7 in.	780 mm / 30.7 in.	-	780 mm / 30.7 in.
Fuel Capacity	21 Litres / 5.5 gal	21 Litres / 5.5 gal	21.00 litres / 5.55 gallons	21.00 litres / 5.55 gallons	21.00 litres / 5.55 gallons	21.00 litres / 5.55 gallons	21.00 litres / 5.55 gallons	21.00 litres / 5.55 gallons	-	-	-	-	22.00 litres / 5.81 gallons	22.00 litres / 5.81 gallons
Wheelbase	1505 mm / 59.3 in	1505 mm / 59.3 in	-	-	-	-	-	-	-	-	-	-	1,505 mm / 59.3 in.	1,505 mm / 59.3 in.
Brakes - Front	2x 296mm discs 2 piston calipers	2x 296mm discs 2 piston calipers	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc	Dual disc

Key Specifications

Engine

In-line four

Power

Not published by manufacturer

Torque

Not published by manufacturer

Top Speed

237.0 km/h / 147.3 mph

Weight

262.0 kg / 577.6 lbs

Fuel Capacity

21.00 litres / 5.55 gallons

Full 1989 Honda CBR 1000F Specifications

Fuel Capacity 21.00 litres / 5.55 gallons

Wet Weight 262.0 kg / 577.6 lbs

Top Speed 237.0 km/h / 147.3 mph

Bore x Stroke (in,) 3.0 x 2.1 inches

Bore x Stroke (mm) 77.0 x 53.6 mm

Displacement (cc) 998.00 cc

Displacement (ci) 60.90 cubic inches

Engine Type In-line four

Fuel Control DOHC

Stroke 4

Compression Ratio 10.5:1

Valve System 4

Final Drive Chain

Gearbox 6-speed

Brakes - Front Dual disc

Brakes - Rear Single disc

Tyres - Front 110/80-17

Tyres - Rear 140/80-17

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.