1989 Honda CBR 1000F vs 1986 Yamaha FJ 1200
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Year | - | 1986 |
| Make Model | - | Yamaha FJ 1200 |
| Dimensions |
| Seat Height | - | 780 mm / 30.7 in |
| Wheelbase | - | 1490 mm / 58.7in |
| Ground Clearance | - | 140 mm / 5.5 in |
| Height | - | 1,245mm / 49.0 in |
| Length | - | 2230 mm / 87.8 in |
| Width | - | 775 mm / 30.5 in |
| Weights & Capacities |
| Dry Weight | - | 245 kg / 540.1 lbs |
| Fuel Capacity | 21.00 litres / 5.55 gallons | 22 Litres / 5.8 gal |
| Oil Capacity | - | 4.2 Litres |
| Wet Weight | 262.0 kg / 577.6 lbs | 259 kg / 571 lbs |
| Performance |
| Top Speed | 237.0 km/h / 147.3 mph | 244.3 km/h / 151.8 mph |
| Braking (60 km/h - 0) | - | 14.1 m / 40.0 m |
| Max Power | - | 130 hp / 94.9 kW @ 9000 rpm |
| Max Power - Rear Tyre | - | 112.5 hp @ 8600 rpm |
| Max Torque | - | 108 Nm / 79.6 lb-ft @ 7500 rpm |
| Standing Start ¼ Mile | - | 10.9 sec / 200.3 km/h |
| Engine |
| Stroke | 4 | - |
| Engine Type | In-line four | - |
| Displacement (ci) | 60.90 cubic inches | - |
| Displacement (cc) | 998.00 cc | - |
| Bore x Stroke (mm) | 77.0 x 53.6 mm | - |
| Bore x Stroke (in,) | 3.0 x 2.1 inches | - |
| Fuel Control | DOHC | - |
| Displacement | - | 1188 cc / 72.5 cu in |
| Engine Detail | - | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. |
| Bore x Stroke | - | 77 x 63.8 mm |
| Compression Ratio | 10.5:1 | 9.7:1 |
| Cooling System | - | Air/oil cooled, |
| Engine Oil Specification | - | 20W/40 |
| Fuel Consumption | - | 14.5 km/lit |
| Fuel Induction | - | 4x Mikuni BS36 36 mm carburettors |
| Ignition | - | TCI (Transistor Controlled Ignition) |
| Lubrication | - | Wet sump |
| Spark Plug | - | NGK, DP8EA-9 |
| Starter | - | Starting |
| Valve System | 4 | - |
| Drivetrain |
| Clutch | - | Wet, multiple discs, hydraulic operated |
| Final Drive | Chain | Chain 2.353 (40/17) |
| Gear Ratios | - | 1st 2.857 (40/14) 2nd 2.000 (36/18) 3rd 1.571 (33/21) 4th 1.291 (31/24) 5th 1.115 (29/26) |
| Gearbox | 6-speed | - |
| Primary Drive Ratios | - | Spur Gear 1.750 (98/56) |
| Transmission / Drive | - | 5 Speed |
| Chassis |
| Frame Type | - | Steel, twin spar |
| Suspension - Front | - | Telescopic with 3-way preload and damping adjustment |
| Suspension - Rear | - | Monocross monoshock 5-way preload and 5-way damping adjustment |
| Wheels & Brakes |
| Brakes - Front | Dual disc | 2x 282mm discs 2 piston caliper |
| Brakes - Rear | Single disc | Single 282mm disc 2 piston caliper |
| Tyres - Front | 110/80-17 | 120/80 V16 |
| Tyres - Rear | 140/80-17 | 150/80 V16 |
Verdict
⚖️
Too close to call
The 1989 Honda CBR 1000F and the 1986 Yamaha FJ 1200 are evenly matched across the key measurable criteria. Your decision comes down to personal preference, riding style, and which brand's dealer network best suits your location.
Key Differences
1989 Honda CBR 1000F - Advantages
- ✓Competitive all-round: The 1989 Honda CBR 1000F matches or exceeds its rival across all measured criteria.
1986 Yamaha FJ 1200 - Advantages
- ✓Competitive all-round: The 1986 Yamaha FJ 1200 matches or exceeds its rival across all measured criteria.
1989 Honda CBR 1000F vs 1986 Yamaha FJ 1200 - FAQs
What are the engine differences between the 1989 Honda CBR 1000F and 1986 Yamaha FJ 1200?
The 1989 Honda CBR 1000F uses In-line four, while the 1986 Yamaha FJ 1200 is powered by Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder..
Which should I buy, the 1989 Honda CBR 1000F or the 1986 Yamaha FJ 1200?
Both are strong choices. The 1989 Honda CBR 1000F has its own strengths, while the 1986 Yamaha FJ 1200 offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.