![]()
No images available
Tap to enlarge
![]()
2026 CFMoto 1000 MT-X Overview
CFMoto 1000 MT-X is an enduro / off-road motorcycle, displacing 946 cc. Power comes from a Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder engine, a compression ratio of 13.5:1. On the performance side, it delivers 82.8 kW @ 8500 rpm of peak power and 100.9 Nm of torque. On the road, the 2026 1000 MT-X tips the scales at 222 kg, carries a 22.5-litre fuel tank, offers a seat height of 871 mm and spans a 1524 mm wheelbase. That's roughly 23.2 kg heavier than the average enduro / off-road motorcycle in our database. The full 2026 CFMoto 1000 MT-X spec sheet below covers every technical detail, from suspension travel to tyre sizes.
2026 1000 MT-X - Pros & Cons
Strengths
-
⚡
Strong power output: With 82.8 kW @ 8500 rpm and 100.9 Nm of torque on tap, the 1000 MT-X is no slouch for its class.
-
⛽
Large fuel range: A 22.5-litre tank means fewer stops on longer rides - a genuine plus for touring or a lengthy daily commute.
Considerations
-
📏
Tall seat height: At 871 mm, shorter riders will likely be on tiptoes at a standstill - worth sitting on one before you buy.
-
⚙️
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.
Wear Points & Servicing Notes
Cooling system servicing
1000 MT-X's Liquid cooled setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.
Suspension condition on used examples
The 1000 MT-X's suspension runs KYB, φ48 upside down suspension, preload, compression and damping adjustable at the front. The rear uses KYB, multi-link rear suspension, preload, compression and rebound adjustable. Fork-seal condition and rear linkage play are the two things worth checking before buying used.
Final drive maintenance
The 1000 MT-X uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.
Frame & chassis check
Built around a Tubular steel, aluminum swingarm, the 1000 MT-X's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.
Handling the weight at a standstill
222 kg puts the 1000 MT-X toward the heavier end of its class. It's most noticeable at walking pace; once underway the mass settles into the handling rather than fighting it.
1000 MT-X - Buying & Maintenance Guide
What to check before buying
Before handing over money for a used 2026 CFMoto 1000 MT-X, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy 1000 MT-X should catch quickly and settle into a smooth idle.
Oil and filter changes
Nothing protects a 1000 MT-X's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.
Carburetor upkeep
Deposits in the carbs are the usual culprit behind poor running on a stored 1000 MT-X - strip and clean the float bowls before the first start. Pilot jets clog first and get overlooked most, so make a point of checking them.
2026 CFMoto 1000 MT-X - Frequently Asked Questions
What engine does the 2026 CFMoto 1000 MT-X have?
The 2026 CFMoto 1000 MT-X uses a Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder engine with 946 cc of displacement. It is liquid cooled.
How much does the 2026 CFMoto 1000 MT-X weigh?
The 2026 CFMoto 1000 MT-X weighs 222 kg. This is the manufacturer's wet figure.
How much power does the 2026 CFMoto 1000 MT-X make?
The 2026 CFMoto 1000 MT-X produces 82.8 kW @ 8500 rpm of power and 100.9 Nm of torque. These are peak figures.
What is the fuel tank capacity of the 2026 CFMoto 1000 MT-X?
The 2026 CFMoto 1000 MT-X has a 22.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 375-450 km between stops.
Is the 2026 CFMoto 1000 MT-X suitable for shorter riders?
The 2026 CFMoto 1000 MT-X has a seat height of 871 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2026 CFMoto 1000 MT-X have?
The 2026 CFMoto 1000 MT-X uses 2 x Φ320mm, four-piston caliper, Brembo at the front and Φ240mm single disc, single-piston caliper, Brembo at the rear.
What tyre sizes does the 2026 CFMoto 1000 MT-X use?
The 2026 CFMoto 1000 MT-X runs 90/90 R21 CST front and 150/70 R18 CST rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2026 CFMoto 1000 MT-X have?
The 2026 CFMoto 1000 MT-X is fitted with a 6-speed CF-SC slipper clutch transmission.
Key Specifications
Engine
Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder
Power
82.8 kW / 111 hp @ 8500 rpm
Torque
100.9 Nm / 77.4 lb-ft @626-speed 50 rpm
Top Speed
Not published by manufacturer
Weight
222 kg / 489.4 lbs
Fuel Capacity
22.5 Litres / 5.9 US gal
Advertisement
Full 2026 CFMoto 1000 MT-X Specifications
Year
2026
Make Model
CFMoto 1000 MT-X
Seat Height
871 mm / 34.3 in
Wheelbase
1524 mm / 60 in
Fuel Capacity
22.5 Litres / 5.9 US gal
Wet Weight
222 kg / 489.4 lbs
Displacement
946 cc / cu-in
Engine Detail
Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder
Bore x Stroke
95.2 x 70.4 mm
Compression Ratio
13.5:1
Cooling System
Liquid cooled
Fuel Induction
Bosch EFI
Ignition
Electronic
Lubrication
Pressure lubrication with two oil pumps
Starter
Electric
Clutch
Wet multi-plate
Final Drive
Chain
Transmission / Drive
6-speed CF-SC slipper clutch
Frame Type
Tubular steel, aluminum swingarm
Suspension - Front
KYB, φ48 upside down suspension, preload, compression and damping adjustable
Suspension - Rear
KYB, multi-link rear suspension, preload, compression and rebound adjustable
Wheel Travel - Front
229 mm / 9 in
Wheel Travel - Rear
229 mm / 9 in
Instrumentation
8-inch curved TFT display, CFMOTO Ride App connectivity
Brakes - Front
2 x Φ320mm, four-piston caliper, Brembo
Brakes - Rear
Φ240mm single disc, single-piston caliper, Brembo
ABS
BOSCH dual-channel ABS (rear ABS switchable)
Tyres - Front
90/90 R21 CST
Tyres - Rear
150/70 R18 CST
Wheels
Wire-spoked rims
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement