2014 BMW K 1600 GTL Specifications

Custom / cruiser • Specs last verified 13 July 2026

No images available
Tap to enlarge

2014 BMW K 1600 GTL Overview

BMW K 1600 GTL is a custom / cruiser motorcycle, displacing 1649 cc. Power comes from a Four stroke, transverse six cylinder, 4 valves per cylinder engine, a compression ratio of 12.2:1. On the performance side, it delivers 118 kW @ 7750 rpm of peak power and 175 Nm @ 5250 rpm of torque. Top speed is factory-quoted at 239.2 km/h. On the road, the 2014 K 1600 GTL tips the scales at 348 kg, carries a 26.5-litre fuel tank, offers a seat height of 810 - 830 mm and spans a 1680 mm wheelbase. That's roughly 46.8 kg heavier than the average custom / cruiser motorcycle in our database. The full 2014 BMW K 1600 GTL spec sheet below covers every technical detail, from suspension travel to tyre sizes.

2014 K 1600 GTL - Pros & Cons

Strengths

  • Strong power output: With 118 kW @ 7750 rpm and 175 Nm @ 5250 rpm of torque on tap, the K 1600 GTL is no slouch for its class.
  • Large fuel range: A 26.5-litre tank means fewer stops on longer rides - a genuine plus for touring or a lengthy daily commute.
  • Low-maintenance final drive: Running Shaft final drive cuts out the regular chain cleaning and tensioning that most bikes need.

Considerations

  • Age-related wear: Nothing specific stands out as a weak point on the K 1600 GTL - the usual used-bike checks (service history, consumables, tyres) apply.

Wear Points & Servicing Notes

Cooling system servicing

K 1600 GTL's Liquid cooled setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.

Brake disc and pad wear

Braking up front comes from 2 x ∅320mm discs, 4 piston calipers - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.

Suspension condition on used examples

The K 1600 GTL's suspension runs Dual longitudinal control arm at the front. The rear uses Paralever. Fork-seal condition and rear linkage play are the two things worth checking before buying used.

Final drive maintenance

The K 1600 GTL uses shaft final drive: essentially maintenance-free day to day, with periodic gear-oil changes the only real service item.

Frame & chassis check

Built around a Chill-cast rear frame, aluminium, extruded sections, the K 1600 GTL's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.

Handling the weight at a standstill

348 kg puts the K 1600 GTL toward the heavier end of its class. It's most noticeable at walking pace; once underway the mass settles into the handling rather than fighting it.

K 1600 GTL - Buying & Maintenance Guide

What to check before buying

Before handing over money for a used 2014 BMW K 1600 GTL, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy K 1600 GTL should catch quickly and settle into a smooth idle.

Oil and filter changes

Nothing protects a K 1600 GTL's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.

Carburetor upkeep

Deposits in the carbs are the usual culprit behind poor running on a stored K 1600 GTL - strip and clean the float bowls before the first start. Pilot jets clog first and get overlooked most, so make a point of checking them.

2014 BMW K 1600 GTL - Frequently Asked Questions

What engine does the 2014 BMW K 1600 GTL have?
The 2014 BMW K 1600 GTL uses a Four stroke, transverse six cylinder, 4 valves per cylinder engine with 1649 cc of displacement. It is liquid cooled.
What is the top speed of the 2014 BMW K 1600 GTL?
The 2014 BMW K 1600 GTL has a factory-quoted top speed of 239.2 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.
How much does the 2014 BMW K 1600 GTL weigh?
The 2014 BMW K 1600 GTL weighs 348 kg. This is the manufacturer's wet figure.
How much power does the 2014 BMW K 1600 GTL make?
The 2014 BMW K 1600 GTL produces 118 kW @ 7750 rpm of power and 175 Nm @ 5250 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2014 BMW K 1600 GTL?
The 2014 BMW K 1600 GTL has a 26.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 441-530 km between stops.
Is the 2014 BMW K 1600 GTL suitable for shorter riders?
The 2014 BMW K 1600 GTL has a seat height of 810 - 830 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2014 BMW K 1600 GTL have?
The 2014 BMW K 1600 GTL uses 2 x ∅320mm discs, 4 piston calipers at the front and Single ∅320mm disc, 2 piston caliper at the rear.
What tyre sizes does the 2014 BMW K 1600 GTL use?
The 2014 BMW K 1600 GTL runs 120/70 ZR17 front and 190/55 ZR17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2014 BMW K 1600 GTL have?
The 2014 BMW K 1600 GTL is fitted with a 6 Speed transmission.

BMW K 1600 GTL Spec Evolution

The BMW K 1600 GTL was produced across 9 model years (2011-2022). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 2011 2012 2013 2014 2015 2018 2020 2021 2022
Max Power 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160.5 hp @ 7750 rpm 118 kW / 160 hp @ 6750 rpm
Wet Weight 348 kg / 768 lbs 348 kg / 768 lbs 348 kg / 768 lbs 348 kg / 768 lbs 348 kg / 768 lbs 348.0 kg / 767.2 in 348.0 kg / 767.2 in 348.0 kg / 767.2 in 358 kg / 789.2 lbs
Dry Weight 321 kg / 708 lbs 321 kg / 708 lbs 321 kg / 708 lbs 321 kg / 708 lbs 321 kg / 708 lbs 321 kg / 707.7 lbs 321 kg / 707.7 lbs 321 kg / 707.7 lbs -
Seat Height 810 - 830 mm / 31.9 - 32.7 in (standard) 780 - 800 mm / 30.7 - 31.5 in(optional rider seat) 750 mm / 29.5 in (special accessory seat, single-section) 810 - 830 mm / 31.9 - 32.7 in (standard) 780 - 800 mm / 30.7 - 31.5 in(optional rider seat) 750 mm / 29.5 in (special accessory seat, single-section) 810 - 830 mm / 31.9 - 32.7 in (standard) 780 - 800 mm / 30.7 - 31.5 in(optional rider seat) 750 mm / 29.5 in (special accessory seat, single-section) 810 - 830 mm / 31.9 - 32.7 in (standard) 780 - 800 mm / 30.7 - 31.5 in(optional rider seat) 750 mm / 29.5 in (special accessory seat, single-section) 810 - 830 mm / 31.9 - 32.7 in (standard) 780 - 800 mm / 30.7 - 31.5 in(optional rider seat) 750 mm / 29.5 in (special accessory seat, single-section) 750 mm / 29.5 in If adjustable, lowest setting 750 mm / 29.5 in If adjustable, lowest setting 750 mm / 29.5 in If adjustable, lowest setting 750 - 800 mm / 29.5 - 31.4 in (standard)
Frame Type Chill-cast rear frame, aluminium, extruded sections Chill-cast rear frame, aluminium, extruded sections Chill-cast rear frame, aluminium, extruded sections Chill-cast rear frame, aluminium, extruded sections Chill-cast rear frame, aluminium, extruded sections Bridge-type frame, cast aluminium, load-bearing engine Bridge-type frame, cast aluminium, load-bearing engine Bridge-type frame, cast aluminium, load-bearing engine Bridge-type frame, cast aluminium, load-bearing engine
Displacement 1649 cc / 100.6 cu in. 1649 cc / 100.6 cu in. 1649 cc / 100.6 cu in. 1649 cc / 100.6 cu in. 1649 cc / 100.6 cu in. 1649 cc / 100.6 cu in. 1649 cc / 100.6 cu in. 1649 cc / 100.6 cu-in 1649 cc / 100.6 cu-in
Wheelbase 1680 mm / 66.1 in 1680 mm / 66.1 in 1680 mm / 66.1 in 1680 mm / 66.1 in 1680 mm / 66.1 in 1680 mm / 66.1 in 1680 mm / 66.1 in 1680 mm / 66.1 in 1618 mm / 63.7 in
Brakes - Front 2 x ∅320mm discs, 4 piston calipers 2 x ∅320mm discs, 4 piston calipers 2 x ∅320mm discs, 4 piston calipers 2 x ∅320mm discs, 4 piston calipers 2 x ∅320mm discs, 4 piston calipers 2 x 320mm discs, 4 piston calipers 2 x 320mm discs, 4 piston calipers 2 x 320mm discs, 4 piston calipers 2 x 320mm discs, 4 piston calipers

Key Specifications

Engine

Four stroke, transverse six cylinder, 4 valves per cylinder

Power

118 kW / 160.5 hp @ 7750 rpm

Torque

175 Nm / 17.8 kgf-m / 129 lb-ft @ 5250 rpm

Top Speed

239.2 km/h / 148.6 mph

Weight

348 kg / 768 lbs

Fuel Capacity

26.5 Litres / 7.0 US gal

Advertisement

Full 2014 BMW K 1600 GTL Specifications

Year 2014
Make Model BMW K 1600 GTL
Seat Height 810 - 830 mm / 31.9 - 32.7 in (standard) 780 - 800 mm / 30.7 - 31.5 in(optional rider seat) 750 mm / 29.5 in (special accessory seat, single-section)
Wheelbase 1680 mm / 66.1 in
Height 1465 mm / 57.7 in
Length 2489m m / 98.0 in
Width 1000 mm / 39.4 in
Dry Weight 321 kg / 708 lbs
Fuel Capacity 26.5 Litres / 7.0 US gal
Wet Weight 348 kg / 768 lbs
Top Speed 239.2 km/h / 148.6 mph
Max Power 118 kW / 160.5 hp @ 7750 rpm
Max Torque 175 Nm / 17.8 kgf-m / 129 lb-ft @ 5250 rpm
Standing Start ¼ Mile 11.7 sec
Displacement 1649 cc / 100.6 cu in.
Engine Detail Four stroke, transverse six cylinder, 4 valves per cylinder
Bore x Stroke 72 x 67.5 mm
Compression Ratio 12.2:1
Cooling System Liquid cooled
Fuel Consumption 5.95 L/100 km / 16.8 km/l / 39.5 US mpg
Fuel Induction ∅52mm Throttle valve diameter, BMS-X
Fuel Reserve 4 Litres / 1.1 US gal
Fuel Type Premium unleaded (95 RON)
Ignition Digital CDI
Starter Electric
Battery Capacity 12 V / 19 Ah maintenance free
Clutch Multiplate wet clutch, hydraulically activated
Final Drive Shaft
Gear Ratios 1st 2.23 / 2nd 1.641 / 3rd 1.319 / 4th 1.101 / 5th 0.926 / 6th 0.788
Transmission / Drive 6 Speed
Frame Type Chill-cast rear frame, aluminium, extruded sections
Suspension - Front Dual longitudinal control arm
Suspension - Rear Paralever (single-sided swing arm), central spring strut, rebound/continuously variable
Steering Head Angle 62.2°
Trail 108.4 mm / 4.3 in
Wheel Travel - Front 115 mm / 4.8 in
Wheel Travel - Rear 135 mm / 5.3 in
Alternator 580 W Alternator
Brakes - Front 2 x ∅320mm discs, 4 piston calipers
Brakes - Rear Single ∅320mm disc, 2 piston caliper
ABS BMW Motorrad ABS (partial integral)
Rims - Front 3.0 x 17
Rims - Rear 6.00 x 17
Tyres - Front 120/70 ZR17
Tyres - Rear 190/55 ZR17
Wheels Cast aluminium wheels

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.

Advertisement