2023 Husqvarna TC 65 vs 2019 KTM 50 SX Mini
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | - | The engine power can be restricted to 5.5 hp with a kit. |
| Colours | White/grey/yellow | Orange/white/black |
| Dimensions |
| Ground Clearance (in.) | 11.0 inches | 9.9 inches |
| Ground Clearance (mm) | 280 mm | 252 mm |
| Seat Height | 750 mm / 29.5 in. | 684 mm / 26.9 in. |
| Wheelbase | - | 1032 mm / 40.6 in. |
| Weights & Capacities |
| Dry Weight | 53 kg / 116.8 lbs | 40 kg / 88.2 lbs |
| Fuel Capacity | 3.70 litres / 0.98 US gallons | 2.10 litres / 0.55 US gallons |
| Engine |
| Bore x Stroke (in,) | 1.8 x 1.6 inches | 1.6 x 1.6 inches |
| Bore x Stroke (mm) | 45.0 x 40.8 mm | 39.5 x 40.0 mm |
| Displacement (cc) | 64.9 cc | 49.0 cc |
| Displacement (ci) | 3.96 cubic inches | 2.99 cubic inches |
| Engine Type | Single cylinder, two-stroke | Single cylinder, two-stroke |
| Stroke | 2-stroke | - |
| Engine Detail | - | Reed intake |
| Fuel System | Carburettor | Carburettor. Mikuni TMX |
| Engine Lubrication | Mixture oil lubrication | Mixture oil lubrication |
| Ignition | AET digital EMS | Seletra 2p D36 |
| Starter | Kick | Kick |
| Drivetrain |
| Clutch | Wet, multi-disc clutch, Formula hydraulics | Centrifugal clutch |
| Final Drive | Chain (final drive) | Chain (final drive) |
| Gearbox | 6-speed | 1-speed |
| Primary Drive | 1/2 x 1/4´ chain | - |
| Chassis |
| Frame Type | Chrome-molybdenum steel central-tube | Chrome-molybdenum steel central-tube frame |
| Suspension - Front | XACT 35 WP Upside-Down fork, Ø 35 mm | WP upside-down Ø 35 mm |
| Suspension - Rear | XACT WP PDS mono shock | WP shock absorber |
| Rake | 25.5° | 24.0° |
| Wheel Travel - Front | 215 mm / 8.5 in. | 100 mm / 3.9 in. |
| Wheel Travel - Rear | 270 mm / 10.6 in. | 147 mm / 5.8 in. |
| Wheels & Brakes |
| Brakes - Front | Single disc. Hydraulic, wave disk | Single disc. Four-piston calipers. |
| Brakes - Rear | Single disc. Hydraulic, wave disk | Single disc. Two-piston calipers. |
| Rims | Black anodised, aluminium rims. MAXXIS tyres. | Wire spoked |
Verdict
⚖️
Too close to call
The 2023 Husqvarna TC 65 and the 2019 KTM 50 SX Mini are evenly matched across the key measurable criteria. Your decision comes down to personal preference, riding style, and which brand's dealer network best suits your location.
Key Differences
2023 Husqvarna TC 65 - Advantages
- 🏔️More ground clearance: 280 mm vs 252 mm - better clearance over rocks and obstacles.
- 🔄More rear wheel travel: 270 mm vs 147 mm - absorbs bigger hits and rough terrain better.
- 🔄More front wheel travel: 215 mm vs 100 mm - greater compliance over rough surfaces.
2019 KTM 50 SX Mini - Advantages
- ⚖️Lighter: 40 kg vs 53 kg - easier to handle and less fatiguing on long trips.
- 📏Lower seat height: 684 mm vs 750 mm - accessible to a wider range of rider heights.
2023 Husqvarna TC 65 vs 2019 KTM 50 SX Mini - FAQs
Which is lighter, the 2023 Husqvarna TC 65 or the 2019 KTM 50 SX Mini?
The 2019 KTM 50 SX Mini is lighter at 40 kg compared to 53 kg for the 2023 Husqvarna TC 65 - a difference of 13 kg. This is a meaningful difference that affects handling and rider fatigue.
Which bike is better for shorter riders, the 2023 Husqvarna TC 65 or the 2019 KTM 50 SX Mini?
The 2019 KTM 50 SX Mini has the lower seat at 684 mm, making it more accessible. The 2023 Husqvarna TC 65 sits higher at 750 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2023 Husqvarna TC 65 or the 2019 KTM 50 SX Mini?
Both are strong choices. The 2023 Husqvarna TC 65 has the edge in greater ground clearance and higher rear wheel travel, while the 2019 KTM 50 SX Mini stands out for lighter kerb weight and lower seat height. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.