2022 Husqvarna TC 50 vs 2019 KTM 50 SX Mini
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | Power reduction kit available. | The engine power can be restricted to 5.5 hp with a kit. |
| Colours | White/blue/yellow | Orange/white/black |
| Warranty | 2 Years | - |
| Dimensions |
| Ground Clearance (mm) | 252 mm | 252 mm |
| Ground Clearance (in.) | 9.9 inches | 9.9 inches |
| Seat Height | 665 mm / 26.2 in. | 684 mm / 26.9 in. |
| Wheelbase | 1032 mm / 40.6 in. | 1032 mm / 40.6 in. |
| Weights & Capacities |
| Oil Capacity (Quarts) | 0.95 US quarts | - |
| Oil Capacity (l) | 0.90 litres | - |
| Dry Weight | 41.5 kg / 91.5 lbs | 40 kg / 88.2 lbs |
| Fuel Capacity | 2.30 litres / 0.61 US gallons | 2.10 litres / 0.55 US gallons |
| Engine |
| Bore x Stroke (in,) | 1.6 x 1.6 inches | 1.6 x 1.6 inches |
| Bore x Stroke (mm) | 39.5 x 40.0 mm | 39.5 x 40.0 mm |
| Displacement (cc) | 49.0 cc | 49.0 cc |
| Displacement (ci) | 2.99 cubic inches | 2.99 cubic inches |
| Engine Type | Single cylinder, two-stroke | Single cylinder, two-stroke |
| Engine Detail | Reed valve | Reed intake |
| Fuel System | - | Carburettor. Mikuni TMX |
| Engine Lubrication | Mixture oil lubrication | Mixture oil lubrication |
| Ignition | Seletra 2p D36 | Seletra 2p D36 |
| Starter | Kick | Kick |
| Drivetrain |
| Clutch | Centrifugal clutch (adjustable) | Centrifugal clutch |
| Final Drive | Chain (final drive) | Chain (final drive) |
| Gearbox | Automatic | 1-speed |
| Primary Drive | Single-speed automatic. | - |
| Chassis |
| Frame Type | Chrome-molybdenum steel central-tube | Chrome-molybdenum steel central-tube frame |
| Suspension - Front | XACT 35 WP Upside-Down fork, Ø 35 mm | WP upside-down Ø 35 mm |
| Suspension - Rear | XACT WP mono shock | WP shock absorber |
| Rake | 24.0° | 24.0° |
| Wheel Travel - Front | 205 mm / 8.1 in. | 100 mm / 3.9 in. |
| Wheel Travel - Rear | 185 mm / 7.3 in. | 147 mm / 5.8 in. |
| Wheels & Brakes |
| Brakes - Front | Single disc. Hydraulic, wave disk | Single disc. Four-piston calipers. |
| Brakes - Rear | Single disc. Hydraulic, wave disk | Single disc. Two-piston calipers. |
| Rims | Black anodised, aluminium rims. Maxxis tyres. | Wire spoked |
Verdict
🏆
Winner on specs
2022 Husqvarna TC 50
The 2022 Husqvarna TC 50 edges out the 2019 KTM 50 SX Mini thanks to its lower seat height, higher rear wheel travel and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2022 Husqvarna TC 50 - Advantages
- 📏Lower seat height: 665 mm vs 684 mm - accessible to a wider range of rider heights.
- 🔄More rear wheel travel: 185 mm vs 147 mm - absorbs bigger hits and rough terrain better.
- 🔄More front wheel travel: 205 mm vs 100 mm - greater compliance over rough surfaces.
2019 KTM 50 SX Mini - Advantages
- ✓Competitive all-round: The 2019 KTM 50 SX Mini matches or exceeds its rival across all measured criteria.
2022 Husqvarna TC 50 vs 2019 KTM 50 SX Mini - FAQs
Which bike is better for shorter riders, the 2022 Husqvarna TC 50 or the 2019 KTM 50 SX Mini?
The 2022 Husqvarna TC 50 has the lower seat at 665 mm, making it more accessible. The 2019 KTM 50 SX Mini sits higher at 684 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2022 Husqvarna TC 50 or the 2019 KTM 50 SX Mini?
Both are strong choices. The 2022 Husqvarna TC 50 has the edge in lower seat height and higher rear wheel travel, while the 2019 KTM 50 SX Mini offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.