2016 Honda XR 150L vs 2020 KTM 125 SX

Full specifications comparison • 2 motorcycles

Comparing 2 motorcycles
2016 Honda XR 150L 2016 Honda XR 150L

Enduro / Off-Road

Engine
Single cylinder, four-stroke
Power
N/A
Top Speed
N/A
Weight
286.6 pounds
2020 KTM 125 SX 2020 KTM 125 SX

Enduro / Off-Road

Engine
Single cylinder, two-stroke
Power
N/A
Top Speed
N/A
Weight
302.0 pounds
Full Specifications
General
CommentsSold as a farm bike in Australia and Asia.-
ColoursRedWhite, Orange
Dimensions
StorageRear rack-
Ground Clearance (mm)245 mm-
Ground Clearance (in.)9.6 inches-
Seat Height825 mm / 32.5 in.-
Wheelbase1,390 mm / 54.7 in.-
Height1,125 mm / 44.3 in.-
Length2,090 mm / 82.3 in.-
Width810 mm / 31.9 in.-
Weights & Capacities
Dry Weight130 kg / 286.6 lbs137 kg / 302.0 lbs
Fuel Capacity12.00 litres / 3.17 gallons-
Performance
Power-to-Weight Ratio-0.1095 HP/kg
Engine
Fuel ControlOverhead Valves (OHV)Double Overhead Cams/Twin Cam (DOHC)
Bore x Stroke (in,)2.3 x 2.3 inches2.1 x 2.1 inches
Bore x Stroke (mm)57.3 x 57.8 mm54.0 x 54.5 mm
Engine TypeSingle cylinder, four-strokeSingle cylinder, two-stroke
Displacement (ci)9.09 cubic inches7.62 cubic inches
Displacement (cc)149.00 cc124.8 cc
Fuel SystemCarburettor. 20mm piston-valveInjection
Compression Ratio9.5:1-
Engine Lubrication-Wet sump
Ignition-Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment, type Kokusan
StarterElectric & kickElectric
Valve System4-
Drivetrain
Clutch-Wet multi-disc clutch, mechanically actuated
Final DriveChainChain   (final drive)
Gearbox5-speed6-speed
Primary Drive-5/8  x  1/4 (520) O Ring. Primary drive: 22:72.
Chassis
Frame Type-Central double-cradle
Suspension - FrontTelescopic forkWP upside-down Ø 48 mm
Suspension - RearSwingarm, single shockWP Monoshock
SeatTwo-person seat-
Wheel Travel - Front160 mm / 6.3 in.-
Wheel Travel - Rear151 mm / 5.9 in.150 mm / 5.9 in.
Wheels & Brakes
Brakes - Front Diameter (mm)240 mm-
Brakes - Front Diameter (in.)9.4 inches-
Brakes - FrontSingle disc. Dual-piston calliperSingle disc
Brakes - RearExpanding brake (drum brake)Single disc
Tyres - Front90/90-19110-17
Tyres - Rear110/90-17-

Verdict

Winner on specs

2016 Honda XR 150L

The 2016 Honda XR 150L edges out the 2020 KTM 125 SX thanks to its lighter kerb weight. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.

Key Differences

2016 Honda XR 150L - Advantages

  • Lighter: 130 kg vs 137 kg - easier to handle and less fatiguing on long trips.

2020 KTM 125 SX - Advantages

  • Fuel injection: Precise fuelling, better cold-start reliability, and lower maintenance requirements.

2016 Honda XR 150L vs 2020 KTM 125 SX - FAQs

What are the engine differences between the 2016 Honda XR 150L and 2020 KTM 125 SX?
The 2016 Honda XR 150L uses Single cylinder, four-stroke, while the 2020 KTM 125 SX is powered by Single cylinder, two-stroke. This is a fundamental difference - the 2016 Honda XR 150L is a four-stroke engine while the 2020 KTM 125 SX runs a two-stroke, resulting in very different power delivery, maintenance requirements, and riding character.
Which is lighter, the 2016 Honda XR 150L or the 2020 KTM 125 SX?
The 2016 Honda XR 150L is lighter at 130 kg compared to 137 kg for the 2020 KTM 125 SX - a difference of 7 kg. This is a small difference unlikely to be a deciding factor in everyday riding.
Which should I buy, the 2016 Honda XR 150L or the 2020 KTM 125 SX?
Both are strong choices. The 2016 Honda XR 150L has the edge in lighter kerb weight, while the 2020 KTM 125 SX stands out for fuel injection. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.