2016 Honda XR 150L vs 2014 Honda CRF110F
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | Sold as a farm bike in Australia and Asia. | Model ID: CRF110F |
| Colours | Red | Red |
| Warranty | - | Six Months transferable limited warranty; extended warranty available with a Honda Protection Plan. |
| Dimensions |
| Ground Clearance (mm) | 245 mm | 175 mm |
| Ground Clearance (in.) | 9.6 inches | 6.9 inches |
| Storage | Rear rack | - |
| Seat Height | 825 mm / 32.5 in. | 668 mm / 26.3 in. |
| Wheelbase | 1,390 mm / 54.7 in. | 1,064 mm / 41.9 in. |
| Height | 1,125 mm / 44.3 in. | 912 mm / 35.9 in. |
| Length | 2,090 mm / 82.3 in. | 1,560 mm / 61.4 in. |
| Width | 810 mm / 31.9 in. | 668 mm / 26.3 in. |
| Weights & Capacities |
| Dry Weight | 130 kg / 286.6 lbs | - |
| Fuel Capacity | 12.00 litres / 3.17 gallons | 4.16 litres / 1.10 gallons |
| Wet Weight | - | 73.9 kg / 163.0 lbs |
| Performance |
| Max Torque | - | 8.85 Nm (0.9 kgf-m or 6.5 ft.lbs) @ 3500 |
| Engine |
| Displacement (cc) | 149.00 cc | 109.00 cc |
| Engine Type | Single cylinder, four-stroke | Single cylinder, four-stroke |
| Bore x Stroke (mm) | 57.3 x 57.8 mm | 50.0 x 55.6 mm |
| Fuel Control | Overhead Valves (OHV) | SOHC |
| Displacement (ci) | 9.09 cubic inches | 6.65 cubic inches |
| Bore x Stroke (in,) | 2.3 x 2.3 inches | 2.0 x 2.2 inches |
| Fuel System | Carburettor. 20mm piston-valve | Carburettor. 13mm piston-valve carburetor |
| Compression Ratio | 9.5:1 | 9.0:1 |
| Emissions | - | Meets current California Air Resource Board (CARB) and EPA off-road emissions standards. |
| Fuel Reserve | - | 1.00 litres / 0.26 gallons |
| Ignition | - | CDI |
| Starter | Electric & kick | Electric & kick |
| Valve System | 4 | - |
| Drivetrain |
| Final Drive | Chain | Chain |
| Gearbox | 5-speed | 4-speed |
| Primary Drive | - | #428 chain; 14T/50T |
| Chassis |
| Suspension - Front | Telescopic fork | 31.0mm telescopic fork |
| Suspension - Rear | Swingarm, single shock | Single-shock |
| Rake | - | 24.0° |
| Seat | Two-person seat | - |
| Trail | - | 53 mm / 2.1 in. |
| Wheel Travel - Front | 160 mm / 6.3 in. | 90 mm / 3.5 in. |
| Wheel Travel - Rear | 151 mm / 5.9 in. | 96 mm / 3.8 in. |
| Wheels & Brakes |
| Brakes - Rear Diameter (mm) | - | 109 mm |
| Brakes - Front Diameter (mm) | 240 mm | 109 mm |
| Brakes - Front Diameter (in.) | 9.4 inches | 4.3 inches |
| Brakes - Rear Diameter (in.) | - | 4.3 inches |
| Brakes - Front | Single disc. Dual-piston calliper | Expanding brake (drum brake) |
| Brakes - Rear | Expanding brake (drum brake) | Expanding brake (drum brake) |
| Tyres - Front | 90/90-19 | 70/100-14 |
| Tyres - Rear | 110/90-17 | 80/100-12 |
Verdict
🏆
Winner on specs
2016 Honda XR 150L
The 2016 Honda XR 150L edges out the 2014 Honda CRF110F thanks to its greater ground clearance, higher rear wheel travel and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2016 Honda XR 150L - Advantages
- 🏔️More ground clearance: 245 mm vs 175 mm - better clearance over rocks and obstacles.
- 🔄More rear wheel travel: 151 mm vs 96 mm - absorbs bigger hits and rough terrain better.
- 🔄More front wheel travel: 160 mm vs 90 mm - greater compliance over rough surfaces.
2014 Honda CRF110F - Advantages
- 📏Lower seat height: 668 mm vs 825 mm - accessible to a wider range of rider heights.
2016 Honda XR 150L vs 2014 Honda CRF110F - FAQs
Which bike is better for shorter riders, the 2016 Honda XR 150L or the 2014 Honda CRF110F?
The 2014 Honda CRF110F has the lower seat at 668 mm, making it more accessible. The 2016 Honda XR 150L sits higher at 825 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2016 Honda XR 150L or the 2014 Honda CRF110F?
Both are strong choices. The 2016 Honda XR 150L has the edge in greater ground clearance and higher rear wheel travel, while the 2014 Honda CRF110F stands out for lower seat height. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.