2023 Honda NC750X DCT vs 2026 KTM 690 SMC R

Full specifications comparison • 2 motorcycles

Comparing 2 motorcycles
2023 Honda NC750X DCT 2023 Honda NC750X DCT

Super motard

Engine
Twin, four-stroke
Power
N/A
Top Speed
N/A
Weight
493.0 pounds
2026 KTM 690 SMC R 2026 KTM 690 SMC R

Super motard

Engine
Single cylinder, 4-stroke, SOHC, 4-valve
Power
79 hp / 58.1 kW
Top Speed
N/A
Weight
162 kg / 357 lbs
Full Specifications
General
CommentsThrottle By Wire. power-delivery modes: Standard, Rain, Sport, and a customizable setting. Model id NC750XD.-
Year-2026
ColoursMatte Nightshade Blue-
Make Model-KTM 690 SMC R
WarrantyOne year transferable, unlimited-mileage limited warranty.-
Dimensions
Storage23-liter utility compartment-
Ground Clearance (in.)5.7 inches-
Ground Clearance (mm)145 mm-
Seat Height803 mm / 31.6 in.899 mm / 35.4 in
Wheelbase1527 mm / 60.1 in.1476 mm / 58.1 in
Ground Clearance-237 mm / 9.3 in
Height1330 mm / 52.4 in.-
Length2210 mm / 87.0 in.-
Width846 mm / 33.3 in.-
Weights & Capacities
Oil Capacity (Quarts)4.23 US quarts-
Oil Capacity (l)4.00 litres-
Fuel Capacity14.38 litres / 3.80 US gallons13.3 Litres / 3.5 US gal
Wet Weight223.6 kg / 493.0 lbs162 kg / 357 lbs
Performance
Max Power-79 hp / 58.1 kW
Max Torque69.0 Nm (7.0 kgf-m or 50.9 ft.lbs) @ 4750 Revolutions"73 Nm / 54 lb-ft
Engine
Fuel ControlSingle Overhead Cams (SOHC)-
Engine TypeTwin, four-stroke-
CO281.2 CO2 g/km. (CO2 - Carbon dioxide emission)-
Bore x Stroke (in,)3.0 x 3.1 inches-
Bore x Stroke (mm)77.0 x 80.0 mm-
Displacement (cc)745.0 cc-
Displacement (ci)45.46 cubic inches-
Displacement-692.7 cc / 42.2 cu in
Engine Detail-Single cylinder, 4-stroke, SOHC, 4-valve
Fuel SystemInjection. PGM-FI electronic fuel injection, 36mm-
Compression Ratio10.7:1-
Cooling System-Liquid cooled
EmissionsMeets current EPA standards. California version meets current CARB standards.Euro5 - 96 g/km
Exhaust-Stainless steel primary and secondary silencer
Fuel Consumption3.50 litres/100 km (28.6 km/l or 67.21 mpg)-
Fuel Induction-Keihin EFI (throttle body 50 mm)
IgnitionComputer controlled digital transistorised with electronic advanceKeihin EMS with RBW, double ignition
Lubrication System-Pressure lubrication with 2 oil pumps
StarterElectricElectric
Valve System4-
Drivetrain
ClutchDual-Clutch Transmission (DCT)APTC slipper clutch, hydraulically actuated
Final DriveChain   (final drive)Chain, 520 X-Ring
Gearbox6-speed-
Sprocket16/43 (front/rear)-
Transmission / Drive-6-Speed
Chassis
Frame TypeDiamond; steel pipeChrome-moly tubular space frame, powder-coated
Suspension - FrontShowa 41mm telescopic fork48 mm WP APEX-USD, compression and rebound adjustable
Suspension - RearMonoshock damper, Pro-Link swingarmWP APEX with Pro-Lever linkage
Handlebar-808 mm wide rubber mounted
Rake27.0°-
Steering Head Angle-63.6°
Subframe-Self-supporting plastic tank
Trail110 mm / 4.3 in.110 mm / 4.3 in
Wheel Travel - Front120 mm / 4.7 in.224 mm / 8.8 in
Wheel Travel - Rear107 mm / 4.2 in.240 mm / 9.4 in
Electrical Systems
Lighting systemLED lights front and rear-
Wheels & Brakes
Brakes - FrontSingle disc. ABS. Hydraulic. Two-piston calipers.Single 300mm disc, Brembo four-piston radial fixed calliper
Brakes - RearSingle disc. ABS. Hydraulic. Single-piston caliper.Single 240 mm disc, Brembo single piston floating caliper
ABS-Two-channel Bosch 9.1 MP ABS (incl. Cornering ABS and Supermoto mode Disengegable)
RimsMulti-Spoke Aluminium Cast-
Tyres - Front120/70-ZR17120/70 ZR 17
Tyres - Rear-160/60 ZR 17
Wheels - Front-Spoked wheels with aluminum tubeless rims 3.50 x 17
Wheels - Rear-Spoked wheels with aluminum tubeless rims 5.00 x 17

Verdict

Winner on specs

2026 KTM 690 SMC R

The 2026 KTM 690 SMC R edges out the 2023 Honda NC750X DCT thanks to its liquid cooling, standard ABS, greater ground clearance, higher rear wheel travel and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.

Key Differences

2023 Honda NC750X DCT - Advantages

  • Lower seat height: 803 mm vs 899 mm - accessible to a wider range of rider heights.

2026 KTM 690 SMC R - Advantages

  • Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
  • Standard ABS: A meaningful safety advantage in emergency braking on wet or loose surfaces.
  • More ground clearance: 237 mm vs 145 mm - better clearance over rocks and obstacles.
  • More rear wheel travel: 240 mm vs 107 mm - absorbs bigger hits and rough terrain better.
  • More front wheel travel: 224 mm vs 120 mm - greater compliance over rough surfaces.

2023 Honda NC750X DCT vs 2026 KTM 690 SMC R - FAQs

What are the engine differences between the 2023 Honda NC750X DCT and 2026 KTM 690 SMC R?
The 2023 Honda NC750X DCT uses Twin, four-stroke, while the 2026 KTM 690 SMC R is powered by Single cylinder, 4-stroke, SOHC, 4-valve.
Which bike is better for shorter riders, the 2023 Honda NC750X DCT or the 2026 KTM 690 SMC R?
The 2023 Honda NC750X DCT has the lower seat at 803 mm, making it more accessible. The 2026 KTM 690 SMC R sits higher at 899 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Does the 2023 Honda NC750X DCT or 2026 KTM 690 SMC R have ABS?
The 2026 KTM 690 SMC R is listed with ABS as standard. The 2023 Honda NC750X DCT does not list ABS. ABS provides a meaningful safety benefit in emergency braking on wet or loose surfaces.
Which should I buy, the 2023 Honda NC750X DCT or the 2026 KTM 690 SMC R?
Both are strong choices. The 2023 Honda NC750X DCT has the edge in lower seat height, while the 2026 KTM 690 SMC R stands out for liquid cooling and standard ABS. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.