2026 KTM 690 SMC R Specifications

Super motard • Specs last verified 13 July 2026

No images available
Tap to enlarge

2026 KTM 690 SMC R Overview

For 2026, KTM offers the 690 SMC R as a super motard motorcycle with 692.7 cc on tap. The 2026 KTM 690 SMC R is built around a Single cylinder, 4-stroke, SOHC, 4-valve engine. Out on the road, the 690 SMC R delivers 79 hp of peak power and 73 Nm of torque. In everyday use, the 2026 690 SMC R tips the scales at 162 kg, carries a 13.3-litre fuel tank, offers a seat height of 899 mm and spans a 1476 mm wheelbase. That's roughly 48.5 kg lighter than the average super motard motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2026 KTM 690 SMC R spec sheet below.

2026 690 SMC R - Pros & Cons

Strengths

  • Strong power output: Peak output on the 690 SMC R is 79 hp and 73 Nm of torque - strong numbers for what it is.

Considerations

  • Tall seat height: A 899 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
  • Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Cooling system servicing

With Liquid cooled, thermal management is largely automatic, but the coolant has a service life of its own - replace it on the manufacturer's interval to protect the water passages and thermostat.

Brake disc and pad wear

Single 300mm disc, Brembo four-piston radial fixed calliper up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by 48 mm WP APEX-USD, compression and rebound adjustable up front and WP APEX with Pro-Lever linkage at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the 690 SMC R means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Chrome-moly tubular space frame, powder-coated chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

690 SMC R - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2026 KTM 690 SMC R should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept 690 SMC R settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a 690 SMC R's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Carburetor upkeep

A 690 SMC R that's sat unused is almost always a carb-cleaning job before it runs right again - float bowls and pilot jets first, since they clog before anything else.

2026 KTM 690 SMC R - Frequently Asked Questions

What engine does the 2026 KTM 690 SMC R have?
The 2026 KTM 690 SMC R uses a Single cylinder, 4-stroke, SOHC, 4-valve engine with 692.7 cc of displacement. It is liquid cooled.
How much does the 2026 KTM 690 SMC R weigh?
The 2026 KTM 690 SMC R weighs 162 kg. This is the manufacturer's wet figure.
How much power does the 2026 KTM 690 SMC R make?
The 2026 KTM 690 SMC R produces 79 hp of power and 73 Nm of torque. These are peak figures.
What is the fuel tank capacity of the 2026 KTM 690 SMC R?
The 2026 KTM 690 SMC R has a 13.3-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 221-266 km between stops.
Is the 2026 KTM 690 SMC R suitable for shorter riders?
The 2026 KTM 690 SMC R has a seat height of 899 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2026 KTM 690 SMC R have?
The 2026 KTM 690 SMC R uses Single 300mm disc, Brembo four-piston radial fixed calliper at the front and Single 240 mm disc, Brembo single piston floating caliper at the rear.
What tyre sizes does the 2026 KTM 690 SMC R use?
The 2026 KTM 690 SMC R runs 120/70 ZR 17 front and 160/60 ZR 17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2026 KTM 690 SMC R have?
The 2026 KTM 690 SMC R is fitted with a 6-Speed transmission.

KTM 690 SMC R Spec Evolution

The KTM 690 SMC R was produced across 4 model years (2019-2026). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 2019 2020 2021 2026
Max Power 72 hp / 54 kW @ 72 hp / 54 kW @ 73.7 hp / 55 kW 79 hp / 58.1 kW
Seat Height 890 mm / 35.0 in 890 mm / 35.0 in 892 mm / 35.1 in 899 mm / 35.4 in
Fuel Capacity 13.5 Litres / 3.5 US gal 13.5 Litres / 3.5 US gal 13.5 Litres / 3.5 US gal 13.3 Litres / 3.5 US gal
Frame Type Chromium-molybdenum-steel trellis frame, powder coated Chromium-molybdenum-steel trellis frame, powder coated Chrome-moly tubular space frame, powder-coated Chrome-moly tubular space frame, powder-coated
Displacement 690 cc / 42.1 cu in 690 cc / 42.1 cu in 692.7 cc / 42.2 cu in 692.7 cc / 42.2 cu in
Wheelbase 1470 mm / 57.8 in 1470 mm / 57.8 in 1470 mm / 57.8 in 1476 mm / 58.1 in
Brakes - Front Single 320mm disc, Brembo 4 piston floating caliper Single 320mm disc, Brembo 4 piston floating caliper Single 320mm disc, Brembo four-piston radial fixed calliper Single 300mm disc, Brembo four-piston radial fixed calliper
Ground Clearance 238 mm / 9.3 in 238 mm / 9.3 in 237 mm / 9.3 in 237 mm / 9.3 in

Key Specifications

Engine

Single cylinder, 4-stroke, SOHC, 4-valve

Power

79 hp / 58.1 kW

Torque

73 Nm / 54 lb-ft

Top Speed

Not published by manufacturer

Weight

162 kg / 357 lbs

Fuel Capacity

13.3 Litres / 3.5 US gal

Advertisement

Full 2026 KTM 690 SMC R Specifications

Year 2026
Make Model KTM 690 SMC R
Seat Height 899 mm / 35.4 in
Wheelbase 1476 mm / 58.1 in
Ground Clearance 237 mm / 9.3 in
Fuel Capacity 13.3 Litres / 3.5 US gal
Wet Weight 162 kg / 357 lbs
Max Power 79 hp / 58.1 kW
Max Torque 73 Nm / 54 lb-ft
Displacement 692.7 cc / 42.2 cu in
Engine Detail Single cylinder, 4-stroke, SOHC, 4-valve
Cooling System Liquid cooled
Emissions Euro5 - 96 g/km
Exhaust Stainless steel primary and secondary silencer
Fuel Induction Keihin EFI (throttle body 50 mm)
Ignition Keihin EMS with RBW, double ignition
Lubrication System Pressure lubrication with 2 oil pumps
Starter Electric
Clutch APTC slipper clutch, hydraulically actuated
Final Drive Chain, 520 X-Ring
Transmission / Drive 6-Speed
Frame Type Chrome-moly tubular space frame, powder-coated
Suspension - Front 48 mm WP APEX-USD, compression and rebound adjustable
Suspension - Rear WP APEX with Pro-Lever linkage
Handlebar 808 mm wide rubber mounted
Steering Head Angle 63.6°
Subframe Self-supporting plastic tank
Trail 110 mm / 4.3 in
Wheel Travel - Front 224 mm / 8.8 in
Wheel Travel - Rear 240 mm / 9.4 in
Brakes - Front Single 300mm disc, Brembo four-piston radial fixed calliper
Brakes - Rear Single 240 mm disc, Brembo single piston floating caliper
ABS Two-channel Bosch 9.1 MP ABS (incl. Cornering ABS and Supermoto mode Disengegable)
Tyres - Front 120/70 ZR 17
Tyres - Rear 160/60 ZR 17
Wheels - Front Spoked wheels with aluminum tubeless rims 3.50 x 17
Wheels - Rear Spoked wheels with aluminum tubeless rims 5.00 x 17

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.

Advertisement