![]()
No images available
Tap to enlarge
![]()
2018 Vespa Primavera 125 Overview
Vespa Primavera 125 is a scooter motorcycle, displacing 124.5 cc. Power comes from a Four stroke, single cylinder, SOHC, 3 valve engine, a compression ratio of 10.5:1. On the performance side, it delivers 7.8 kW @ 7700 rpm of peak power and 10.4 Nm @ 6500 rpm of torque. Top speed is factory-quoted at 64 km/h. On the road, the 2018 Primavera 125 tips the scales at 115 kg, carries a 8 L fuel tank, offers a seat height of 780 mm and spans a 1340 mm wheelbase. That's roughly 82.7 kg lighter than the average scooter motorcycle in our database. The full 2018 Vespa Primavera 125 spec sheet below covers every technical detail, from suspension travel to tyre sizes.
2018 Primavera 125 - Pros & Cons
Strengths
-
⚡
Strong power output: With 7.8 kW @ 7700 rpm and 10.4 Nm @ 6500 rpm of torque on tap, the Primavera 125 is no slouch for its class.
-
🔧
Fuel injection: Fuel injection means consistent cold starts and clean throttle response without the fussiness of a carbureted setup.
-
⚙️
Low-maintenance final drive: Running Belt final drive cuts out the regular chain cleaning and tensioning that most bikes need.
Considerations
-
⛽
Modest fuel capacity: Range between stops is limited by the 8 L tank - plan fuel stops accordingly on longer routes.
Wear Points & Servicing Notes
Heat management in traffic
Because the Primavera 125 relies on airflow rather than a coolant jacket, expect noticeably more radiant heat at low speed and in traffic. It's inherent to air cooling, and ventilated gear largely offsets it.
Fuelling & injector care
The fuel injection on the Primavera 125 needs little beyond good fuel and periodic use of an injector-cleaner additive - no jetting or float-bowl maintenance to worry about.
Brake disc and pad wear
Braking up front comes from Stainless steel disc, 200 mm, hydraulically operated - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.
Suspension condition on used examples
The Primavera 125's suspension runs Single arm with coil spring and dual action mono shock absorber at the front. The rear uses Hydraulic monoshock. Fork-seal condition and rear linkage play are the two things worth checking before buying used.
Final drive maintenance
The Primavera 125 runs belt final drive: no lubrication or frequent adjustment like a chain, though belt tension and wear are worth a periodic look.
Frame & chassis check
Built around a Sheet metal body with welded reinforcements, the Primavera 125's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.
Low-speed handling
115 kg keeps the Primavera 125 easy to move around in tight spaces, car parks and on the stand alike.
Primavera 125 - Buying & Maintenance Guide
What to check before buying
Before handing over money for a used 2018 Vespa Primavera 125, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy Primavera 125 should catch quickly and settle into a smooth idle.
Oil and filter changes
Nothing protects a Primavera 125's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.
Fuel system care
Fuel injection on the Primavera 125 needs little attention beyond decent fuel and an occasional system-cleaner additive. Anything left standing for three months or more should have its fuel drained and replaced before it varnishes the injectors.
2018 Vespa Primavera 125 - Frequently Asked Questions
What engine does the 2018 Vespa Primavera 125 have?
The 2018 Vespa Primavera 125 uses a Four stroke, single cylinder, SOHC, 3 valve engine with 124.5 cc of displacement. It is air cooled, forced.
What is the top speed of the 2018 Vespa Primavera 125?
The 2018 Vespa Primavera 125 has a factory-quoted top speed of 64 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.
How much does the 2018 Vespa Primavera 125 weigh?
The 2018 Vespa Primavera 125 weighs 115 kg. This is the manufacturer's dry figure.
How much power does the 2018 Vespa Primavera 125 make?
The 2018 Vespa Primavera 125 produces 7.8 kW @ 7700 rpm of power and 10.4 Nm @ 6500 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2018 Vespa Primavera 125?
The 2018 Vespa Primavera 125 has a 8 L fuel tank. At around 5-6 litres per 100 km, that is roughly 133-160 km between stops.
Is the 2018 Vespa Primavera 125 suitable for shorter riders?
The 2018 Vespa Primavera 125 has a seat height of 780 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2018 Vespa Primavera 125 have?
The 2018 Vespa Primavera 125 uses Stainless steel disc, 200 mm, hydraulically operated at the front and Drum, 140 mm, mechanically operated at the rear.
What tyre sizes does the 2018 Vespa Primavera 125 use?
The 2018 Vespa Primavera 125 runs 110/70-12 front and 20/70-12 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2018 Vespa Primavera 125 have?
The 2018 Vespa Primavera 125 is fitted with a CVT transmission.
Vespa Primavera 125 Spec Evolution
The Vespa Primavera 125 was produced across 2 model years (2015-2018). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2015 |
2018 |
| Fuel Capacity |
8 Litres / 2.1 US gal |
8 L / 2.1 US gal |
| Brakes - Front |
Single Stainless steel 200mm disc, hydraulically operated |
Stainless steel disc, 200 mm, hydraulically operated |
| Rims - Front |
2.50 x 11 |
2.50 x 12 |
| Length |
1860 mm / 73.2 in |
1860 mm / 73.2 in. |
| Rims - Rear |
3.00 x 11 |
3.00 x 12 |
| Tyres - Front |
110/70-11 |
110/70-12 |
| Width |
735 mm / 28.9 in |
735 mm / 28.9 in. |
| Tyres - Rear |
20/70-11 |
20/70-12 |
Key Specifications
Engine
Four stroke, single cylinder, SOHC, 3 valve
Power
7.8 kW / 10.6 hp @ 7700 rpm
Torque
10.4 Nm / 1.06 kgf-m / 7.7 ft-lbs @ 6500 rpm
Top Speed
64 km/h / 40 mph
Fuel Capacity
8 L / 2.1 US gal
Advertisement
Full 2018 Vespa Primavera 125 Specifications
Year
2018
Make Model
Vespa Primavera 125
Seat Height
780 mm / 30.7 in.
Wheelbase
1340 mm / 52.7 in.
Length
1860 mm / 73.2 in.
Width
735 mm / 28.9 in.
Dry Weight
115 kg / 254 lbs
Fuel Capacity
8 L / 2.1 US gal
Displacement
124.5 cc / 7.6 cub in
Engine Detail
Four stroke, single cylinder, SOHC, 3 valve
Fuel System
Fuel injection
Bore x Stroke
52 x 58.6 mm
Compression Ratio
10.5:1
Cooling System
Air cooled, forced
Emissions
Euro 4
Exhaust
Catalytic converter
Fuel Consumption
3.1 L/100 km / 32 km/l / 75 US mpg
Ignition
Electronic
Starter
Electric
Clutch
Automatic, dry centrifugal with vibration dampers
Final Drive
Belt
Transmission / Drive
CVT
Frame Type
Sheet metal body with welded reinforcements
Suspension - Front
Single arm with coil spring and dual action mono shock absorber
Suspension - Rear
Hydraulic monoshock
Wheel Travel - Front
78 mm / 3.1 in.
Wheel Travel - Rear
70 mm / 2.8 in.
Brakes - Front
Stainless steel disc, 200 mm, hydraulically operated
Brakes - Rear
Drum, 140 mm, mechanically operated
Rims - Front
2.50 x 12
Rims - Rear
3.00 x 12
Tyres - Front
110/70-12
Tyres - Rear
20/70-12
Wheels
Die-cast aluminium alloy
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement