2026 Moto Morini X-Cape 1200 Specifications

Name: 2026 Moto Morini X-Cape 1200
Brand: Moto Morini

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2026 Moto Morini X-Cape 1200 Overview

For 2026, Moto Morini offers the X-Cape 1200 as an enduro / off-road motorcycle with 1187 cc on tap. The 2026 Moto Morini X-Cape 1200 is built around a Four stroke, 87°V longitudinal twin, DOHC, 4 valves per cylinder engine, a compression ratio of 12.3:1. Out on the road, the X-Cape 1200 delivers 95 kW of peak power and 106 NM of torque. In everyday use, the 2026 X-Cape 1200 tips the scales at 259 Kg, carries a 24.6-litre fuel tank and spans a 1549 mm wheelbase. That's roughly 60.2 kg heavier than the average enduro / off-road motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2026 Moto Morini X-Cape 1200 spec sheet below.

2026 X-Cape 1200 - Pros & Cons

Strengths

Strong power output: Peak output on the X-Cape 1200 is 95 kW and 106 NM of torque - strong numbers for what it is.
Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.
Large fuel range: With a 24.6-litre tank, this isn't a bike you'll be stopping for fuel every hour - a real asset on longer trips.

Considerations

Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Cooling system servicing

With Liquid cooled, thermal management is largely automatic, but the coolant has a service life of its own - replace it on the manufacturer's interval to protect the water passages and thermostat.

Fuelling & injector care

Fuelling on the X-Cape 1200 comes from fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.

Brake disc and pad wear

2 x 320mm discs with radially mounted Brembo monoblock calipers up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.

Suspension condition on used examples

Suspension duties are handled by Fully adjustable KYB inverted 48mm fork up front and Linkage-assisted, spring-preload adjustable KYB shock at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the X-Cape 1200 means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Mixed aluminium/steel chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

Handling the weight at a standstill

The X-Cape 1200's 259 Kg kerb weight is worth factoring into how you handle it at a standstill - parking-lot manoeuvres need a bit more deliberate technique than on a lighter machine.

X-Cape 1200 - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2026 Moto Morini X-Cape 1200 should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept X-Cape 1200 settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a X-Cape 1200's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Fuel system care

Injector systems like the X-Cape 1200's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.

2026 Moto Morini X-Cape 1200 - Frequently Asked Questions

What engine does the 2026 Moto Morini X-Cape 1200 have?

The 2026 Moto Morini X-Cape 1200 uses a Four stroke, 87°V longitudinal twin, DOHC, 4 valves per cylinder engine with 1187 cc of displacement. It is liquid cooled.

How much does the 2026 Moto Morini X-Cape 1200 weigh?

The 2026 Moto Morini X-Cape 1200 weighs 259 Kg. This is the manufacturer's dry figure.

How much power does the 2026 Moto Morini X-Cape 1200 make?

The 2026 Moto Morini X-Cape 1200 produces 95 kW of power and 106 NM of torque. These are peak figures.

What is the fuel tank capacity of the 2026 Moto Morini X-Cape 1200?

The 2026 Moto Morini X-Cape 1200 has a 24.6-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 410-492 km between stops.

What brakes does the 2026 Moto Morini X-Cape 1200 have?

The 2026 Moto Morini X-Cape 1200 uses 2 x 320mm discs with radially mounted Brembo monoblock calipers at the front and Single 280mm disc with Brembo caliper at the rear.

What tyre sizes does the 2026 Moto Morini X-Cape 1200 use?

The 2026 Moto Morini X-Cape 1200 runs 120/70-19 Pirelli Scorpion Trail III front and 170/60-17 Pirelli Scorpion Trail III rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2026 Moto Morini X-Cape 1200 have?

The 2026 Moto Morini X-Cape 1200 is fitted with a 6 Speed transmission.

Key Specifications

Engine

Four stroke, 87°V longitudinal twin, DOHC, 4 valves per cylinder

Power

95 kW / 129 hp @8750 rpm

Torque

106 NM / 78 lb-ft @7000 rpm

Top Speed

Not published by manufacturer

Weight

259 Kg / 571 lbs

Fuel Capacity

24.6 Litres / 6.5 US gal

Full 2026 Moto Morini X-Cape 1200 Specifications

Year 2026

Make Model Moto Morini X-Cape 1200

Wheelbase 1549 mm / 61 in

Ground Clearance 191 mm / 7.5 in

Height 1529 mm / 60.2 in

Length 2250 mm / 88.6 in

Width 950 mm / 37.4 in

Dry Weight 259 Kg / 571 lbs

Fuel Capacity 24.6 Litres / 6.5 US gal

Max Power 95 kW / 129 hp @8750 rpm

Max Torque 106 NM / 78 lb-ft @7000 rpm

Displacement 1187 cc / 72.4 cu-in

Engine Detail Four stroke, 87°V longitudinal twin, DOHC, 4 valves per cylinder

Bore x Stroke 107 x 66 mm

Compression Ratio 12.3:1

Cooling System Liquid cooled

Emissions Euro 5+

Exhaust Silencer, 3-way catalytic converter with oxygen sensor

Fuel Induction Fuel injection, Magneti Marelli

Ignition Electronic

Starter Electric

Clutch Multiplate clutch in oil bath with antis kipping and radial master cylinder.

Final Drive Chain

Transmission / Drive 6 Speed

Frame Type Mixed aluminium/steel

Suspension - Front Fully adjustable KYB inverted 48mm fork

Suspension - Rear Linkage-assisted, spring-preload adjustable KYB shock

Trail 841 mm / 31.1 in

Wheel Travel - Front 180 mm / 7.1 in

Wheel Travel - Rear 180 mm / 7.1 in

Brakes - Front 2 x 320mm discs with radially mounted Brembo monoblock calipers

Brakes - Rear Single 280mm disc with Brembo caliper

ABS Bosch Cornering with off-road mode

Tyres - Front 120/70-19 Pirelli Scorpion Trail III

Tyres - Rear 170/60-17 Pirelli Scorpion Trail III

Wheels Spoked

Wheels - Front 3.5 x 19"

Wheels - Rear 4.5 x 17"

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.