2020 KTM 1290 Super Duke GT Specifications

Name: 2020 KTM 1290 Super Duke GT
Brand: KTM

Sport • Specs last verified 13 July 2026

No images available

Tap to enlarge

2020 KTM 1290 Super Duke GT Overview

KTM 1290 Super Duke GT is a sport motorcycle, displacing 1301 cc. Power comes from a 75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves engine. On the performance side, it delivers 173 hp of peak power and 141 Nm of torque. On the road, the 2020 1290 Super Duke GT tips the scales at 225.4 kg, carries a 23-litre fuel tank, offers a seat height of 835 mm and spans a 1482 mm ±15 mm wheelbase. That's roughly 22.7 kg heavier than the average sport motorcycle in our database. The full 2020 KTM 1290 Super Duke GT spec sheet below covers every technical detail, from suspension travel to tyre sizes.

2020 1290 Super Duke GT - Pros & Cons

Strengths

Strong power output: With 173 hp and 141 Nm of torque on tap, the 1290 Super Duke GT is no slouch for its class.
Large fuel range: A 23-litre tank means fewer stops on longer rides - a genuine plus for touring or a lengthy daily commute.

Considerations

Tall seat height: At 835 mm, shorter riders will likely be on tiptoes at a standstill - worth sitting on one before you buy.
Chain final drive upkeep: Budget time for routine chain maintenance - it's cheap to replace but needs consistent attention to avoid premature sprocket wear.

Wear Points & Servicing Notes

Cooling system servicing

1290 Super Duke GT's Liquid cooling setup is low-maintenance provided the coolant interval is kept - old, acidic coolant is the main cause of long-term corrosion in the water passages.

Brake disc and pad wear

Braking up front comes from 2x 320 mm floating discs, Brembo calipers, ABS - solid stopping power, with disc and pad wear best checked on the same schedule as tyre changes.

Suspension condition on used examples

The 1290 Super Duke GT's suspension runs WP Semi-Active, ø 48 mm at the front. The rear uses Linkage-assisted WP semi-active shock. Fork-seal condition and rear linkage play are the two things worth checking before buying used.

Final drive maintenance

The 1290 Super Duke GT uses chain final drive, which is cheap to replace but needs regular cleaning, lubrication and tension checks to get a full service life out of the sprockets.

Frame & chassis check

Built around a Chromemoly steel trellis, the 1290 Super Duke GT's chassis is straightforward to inspect: look for corrosion, cracks or repair welds around stress points like the head-stock and swingarm mounts.

Handling the weight at a standstill

225.4 kg puts the 1290 Super Duke GT toward the heavier end of its class. It's most noticeable at walking pace; once underway the mass settles into the handling rather than fighting it.

1290 Super Duke GT - Buying & Maintenance Guide

What to check before buying

Before handing over money for a used 2020 KTM 1290 Super Duke GT, cover the fundamentals: service book and oil change history, chain and sprocket wear, and any sign of oil weeping around the casings. Cold-starting it yourself tells you a lot - a healthy 1290 Super Duke GT should catch quickly and settle into a smooth idle.

Oil and filter changes

Nothing protects a 1290 Super Duke GT's engine like disciplined oil changes - stay on the manufacturer's schedule (roughly every 6,000 km or annually). Match the viscosity grade to what the owner's manual specifies, not what's cheapest.

Carburetor upkeep

Deposits in the carbs are the usual culprit behind poor running on a stored 1290 Super Duke GT - strip and clean the float bowls before the first start. Pilot jets clog first and get overlooked most, so make a point of checking them.

2020 KTM 1290 Super Duke GT - Frequently Asked Questions

What engine does the 2020 KTM 1290 Super Duke GT have?

The 2020 KTM 1290 Super Duke GT uses a 75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves engine with 1301 cc of displacement. It is liquid cooling.

How much does the 2020 KTM 1290 Super Duke GT weigh?

The 2020 KTM 1290 Super Duke GT weighs 225.4 kg. This is the manufacturer's wet figure.

How much power does the 2020 KTM 1290 Super Duke GT make?

The 2020 KTM 1290 Super Duke GT produces 173 hp of power and 141 Nm of torque. These are peak figures.

What is the fuel tank capacity of the 2020 KTM 1290 Super Duke GT?

The 2020 KTM 1290 Super Duke GT has a 23-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 383-460 km between stops.

Is the 2020 KTM 1290 Super Duke GT suitable for shorter riders?

The 2020 KTM 1290 Super Duke GT has a seat height of 835 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2020 KTM 1290 Super Duke GT have?

The 2020 KTM 1290 Super Duke GT uses 2x 320 mm floating discs, Brembo calipers, ABS at the front and Single 240 mm disc, Brembo caliper, ABS at the rear.

What tyre sizes does the 2020 KTM 1290 Super Duke GT use?

The 2020 KTM 1290 Super Duke GT runs 120/70 x 17, Pirelli Angel GT front and 190/55 x 17, Pirelli Angel GT rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What gearbox does the 2020 KTM 1290 Super Duke GT have?

The 2020 KTM 1290 Super Duke GT is fitted with a 6-Speed with up/down quickshifter transmission.

KTM 1290 Super Duke GT Spec Evolution

The KTM 1290 Super Duke GT was produced across 8 model years (2016-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2016	2017	2018	2019	2020	2021	2022	2023
Max Power	129 kW / 173 hp @	129 kW / 173 hp @	129 kW / 173 hp @	173 hp / 129 kW @	173 hp / 129 kW @	173 hp / 129 kW @	175 hp / 130.4 kW @ 9750 rpm	175 hp / 130.4 kW @ 9750 rpm
Wet Weight	228 kg / 506 lbs	228 kg / 506 lbs	228 kg / 506 lbs	225.4 kg / 497 lbs	225.4 kg / 497 lbs	225.4 kg / 497 lbs	225 kg / 496 lbs	223 kg / 492 lbs
Engine Detail	75º V twin, 4 stroke, DOHC, 4 valve	75º V twin, 4 stroke, DOHC, 4 valve	75° V twin, 4 stroke, DOHC, 4 valve	75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves	75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves	75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves	75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves	75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves
Seat Height	835 mm / 32.9 in	835 mm / 32.9 in	835 mm / 32.9 in	835 mm / 32.9 in	835 mm / 32.9 in	835 mm / 32.9 in	835 mm / 32.9 in	835 mm / 32.8 in
Frame Type	Chrome-moly steel trellis	Chrome-moly steel trellis	Chrome-moly steel trellis	Chromemoly steel trellis	Chromemoly steel trellis	Chromemoly steel trellis	Chrome-moly tubular space frame, powder-coated	Chromoly steel trellis with cast-aluminum/composite subframe, powder-coated
Wheelbase	1482 mm ±15 mm / 58.34 in ±0.59 in	1482 mm ±15 mm / 58.34 in ±0.59 in	1482 mm ±15 mm / 58.34 in ±0.59 in	1482 mm ±15 mm / 58.34 in ± 0.59 in	1482 mm ±15 mm / 58.34 in ± 0.59 in	1482 mm ±15 mm / 58.34 in ± 0.59 in	1482 mm ±15 mm / 58.34 in ± 0.59 in	1482 mm ±15 mm / 58.3 in ± 0.59 in
Brakes - Front	320 mm Dual floating discs, Brembo M50 4-piston calipers, ABS	320 mm Dual floating discs, Brembo M50 4-piston calipers, ABS	320 mm Dual floating discs, Brembo M50 4-piston calipers, ABS	2x 320 mm floating discs, Brembo calipers, ABS	2x 320 mm floating discs, Brembo calipers, ABS	2x 320 mm floating discs, Brembo calipers, ABS	2x 320 mm discs, Brembo four-piston radial fixed calliper	2x 320 mm discs, Brembo four-piston radial fixed calliper
Ground Clearance	140 mm / 5.5 in	140 mm / 5.5 in	140 mm / 5.5 in	140 mm / 5.5 in	140 mm / 5.5 in	140 mm / 5.5 in	141 mm / 5.5 in	141 mm / 5.5 in

Key Specifications

Engine

75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves

Power

173 hp / 129 kW @

Torque

141 Nm / 104 lb-ft @

Top Speed

Not published by manufacturer

Weight

225.4 kg / 497 lbs

Fuel Capacity

23 Litres / 6.1 US gal

Full 2020 KTM 1290 Super Duke GT Specifications

Year 2020

Make Model KTM 1290 Super Duke GT

Seat Height 835 mm / 32.9 in

Wheelbase 1482 mm ±15 mm / 58.34 in ± 0.59 in

Ground Clearance 140 mm / 5.5 in

Fuel Capacity 23 Litres / 6.1 US gal

Wet Weight 225.4 kg / 497 lbs

Max Power 173 hp / 129 kW @

Max Torque 141 Nm / 104 lb-ft @

Displacement 1301 cc / 79.4 cu in

Engine Detail 75° V twin, 4 stroke, DOHC, 4 valve per cylinder, titanium inlet valves

Bore x Stroke 108 x 71 mm

Cooling System Liquid cooling

Fuel Induction Keihin EFI, throttle body 56 mm

Ignition Keihin EMS with RBW, dual ignition

Lubrication System Pressure lubrication, 3 Eaton pumps

Starter Electric

Clutch PASC slipper, hydraulically operated

Final Drive Chain

Transmission / Drive 6-Speed with up/down quickshifter

Frame Type Chromemoly steel trellis

Suspension - Front WP Semi-Active, ø 48 mm

Suspension - Rear Linkage-assisted WP semi-active shock

Rake 24.9°

Trail 107 mm / 4.2 in

Wheel Travel - Front 125 mm / 4.9 in

Wheel Travel - Rear 129.5 mm / 5.1 in

Brakes - Front 2x 320 mm floating discs, Brembo calipers, ABS

Brakes - Rear Single 240 mm disc, Brembo caliper, ABS

Tyres - Front 120/70 x 17, Pirelli Angel GT

Tyres - Rear 190/55 x 17, Pirelli Angel GT

Wheels - Front Aluminium, 3.50 x 17 in

Wheels - Rear Aluminium, 6.00 x 17 in

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.