2019 Kawasaki Z 650 Specifications

Naked bike

Advertisement
No images available
Tap to enlarge

2019 Kawasaki Z 650 Overview

The 2019 Kawasaki Z 650 is a naked bike motorcycle built around 649 cc of displacement. Under the tank sits a Twin, four-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation, a compression ratio of 10.8:1. 2019 Kawasaki Z 650 delivers 50.2 kW @ 8500 rpm of peak power and 65.7 Nm @ 7000 rpm of torque. From a practical standpoint, the 2019 Z 650 tips the scales at 184 kg, carries a 15-litre fuel tank, offers a seat height of 785 mm and spans a 1410 mm wheelbase. Scroll down for the complete 2019 Kawasaki Z 650 spec sheet covering every technical detail from suspension travel to tyre sizes.

2019 Z 650 - Pros & Cons

Strengths

  • Strong power output: 2019 Kawasaki Z 650 makes 50.2 kW @ 8500 rpm with 65.7 Nm @ 7000 rpm of torque - competitive figures for its class.
  • Fuel injection: The fuel injection injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.

Considerations

  • Age-related wear: As with any used Z 650, a thorough pre-purchase inspection covering consumables, service history and tyres is always recommended.

Owner Experiences & Common Issues

Throttle response and fuelling

The fuel injection on the 2019 Kawasaki Z 650 is generally well-regarded. Some owners note a slight hesitation at small throttle openings when cold, which clears once the engine reaches operating temperature. A quick visual check of the injector connectors during routine servicing is good practice on higher-mileage examples.

Valve clearance checks

Double Overhead Cams/Twin Cam (DOHC) engines should have valve clearances checked at the manufacturer's specified interval. Owners report that clearances can tighten over time on higher-mileage bikes, leading to slight ticking from the top end. Catching it early keeps the job simple and avoids more costly remediation.

Z 650 - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2019 Kawasaki Z 650, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained Z 650 should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any Z 650. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The Z 650's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used Z 650. This is a job many owners skip because the bike does not immediately feel wrong - but tight clearances accelerate valve seat wear. Ask for proof it has been done.

2019 Kawasaki Z 650 - Frequently Asked Questions

What engine does the 2019 Kawasaki Z 650 have?
The 2019 Kawasaki Z 650 uses a Twin, four-stroke engine with 649 cc of displacement. It is liquid cooled.
How much does the 2019 Kawasaki Z 650 weigh?
The 2019 Kawasaki Z 650 weighs 184 kg. This is the manufacturer's wet figure.
How much power does the 2019 Kawasaki Z 650 make?
The 2019 Kawasaki Z 650 produces 50.2 kW @ 8500 rpm of power and 65.7 Nm @ 7000 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2019 Kawasaki Z 650?
The 2019 Kawasaki Z 650 has a 15-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 250-300 km between stops.
Is the 2019 Kawasaki Z 650 suitable for shorter riders?
The 2019 Kawasaki Z 650 has a seat height of 785 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2019 Kawasaki Z 650 have?
The 2019 Kawasaki Z 650 uses 2x 300mm discs 4 piston calipers at the front and Single 220mm disc at the rear.
What tyre sizes does the 2019 Kawasaki Z 650 use?
The 2019 Kawasaki Z 650 runs 120/70 -17 front and 160/50 -17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2019 Kawasaki Z 650 have?
The 2019 Kawasaki Z 650 is fitted with a 6 Speed transmission.

Kawasaki Z 650 Spec Evolution

The Kawasaki Z 650 was produced across 12 model years (1976-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 1976 1977 1978 1981 1983 2017 2018 2019 2020 2021 2022 2023
Max Power 66 hp / 48.2 kW @ 8500 rpm 66 hp / 48.2 kW @ 8500 rpm 66 hp / 48.2 kW @ 8500 rpm 66 hp / 48.2 kW @ 8500 rpm 66 hp / 48.2 kW @ 8500 rpm 50.2 kW / 67.3 hp @ 8500 rpm 50.2 kW / 67.3 hp @ 8500 rpm 50.2 kW / 67.3 hp @ 8500 rpm 50.2 kW / 67.3 hp @ 8500 rpm 50.2 kW / 67.3 hp 50.2 kW / 67.3 hp -
Wet Weight 220 kg / 485 lbs 220 kg / 485 lbs 220 kg / 485 lbs 220 kg / 485.0 lbs 237 kg / 522.4 lbs 184 kg / 406 lbs 184 kg / 406 lbs 184 kg / 406 lbs 184 kg / 406 lbs 187 kg / 412.3 lbs 187 kg / 412.3 lbs 187.0 kg / 412.3 lbs
Dry Weight 211 kg / 465 lbs 211 kg / 465 lbs 211 kg / 465 lbs - - - - - - - - -
Engine Detail Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder Die-cast aluminium cylinder and lightweight coated pistons
Seat Height 800 mm / 31.5 in 800 mm / 31.5 in 800 mm / 31.5 in 800mm / 31.5 in 800mm / 31.5 in 785 mm / 30.9 in 785 mm / 30.9 in 785 mm / 30.9 in 785 mm / 30.9 in 790 mm / 31.1 in 790 mm / 31.1 in 790 mm / 31.1 in.
Fuel Capacity 16.5 Litres / 4.3 US gal 16.5 Litres / 4.3 US gal 16.5 Litres / 4.3 US gal 16.5 Litres / 4.3 US gal 16.5 Litres / 4.3 US gal 15 Litres / 4.0 US gal 15 Litres / 4.0 US gal 15 Litres / 4.0 US gal 15 Litres / 4.0 US gal 15 Litres / 4.0 US gal 15 Litres / 4.0 US gal 15.14 litres / 4.00 US gallons
Comments - - - - - - - - Rideology the App Smartphone Connectivity Smartphone Connectivity Smartphone Connectivity. Traction control. Smartphone Connectivity.
Frame Type Steel twin loop cradle Steel twin loop cradle Steel twin loop cradle Steel twin loop cradle Steel twin loop cradle Semi-double cradle, high-tensile steel Semi-double cradle, high-tensile steel Semi-double cradle, high-tensile steel Semi-double cradle, high-tensile steel Trellis, high-tensile steel Trellis, high-tensile steel Trellis, high-tensile steel

Key Specifications

Engine

Twin, four-stroke

Power

50.2 kW / 67.3 hp @ 8500 rpm

Torque

65.7 Nm / 48.4 lb-ft @ 7000 rpm

Top Speed

N/A

Weight

184 kg / 406 lbs

Fuel Capacity

15 Litres / 4.0 US gal

Advertisement

Full 2019 Kawasaki Z 650 Specifications

Year 2019
Colours Metallic Flat Spark Black, Black/Metallic Spark Black, Candy Flat Blazed Green/Metallic Matt Graphite Grey/Metallic Flat Spark Black, Pearl Flat Stardust White/Metallic Flat Spark Black
Make Model Kawasaki Z 650
Maximum RPM 12500
Max Power 50.2 kW / 67.3 hp @ 8500 rpm
Max Torque 65.7 Nm / 48.4 lb-ft @ 7000 rpm
CO2 103.0 CO2 g/km. (CO2 - Carbon dioxide emission)
Engine Type Twin, four-stroke
Fuel Control Double Overhead Cams/Twin Cam (DOHC)
Displacement 649 cc / 39.65 cu-in
Engine Detail Four stroke, parallel twin cylinder. DOHC, 4 valves per cylinder
Fuel System Injection. DFI® with Keihin 36mm Keihin throttle bodies
Bore x Stroke 83 x 60 mm
Compression Ratio 10.8:1
Cooling System Liquid cooled
Engine Lubrication Forced lubrication, semi and #8209;dry sump
Fuel Consumption 4.44 litres/100 km (22.5 km/l or 52.98 mpg)
Fuel Induction DFIØ with Keihin 36mm Keihin throttle bodies
Ignition TCBI with electronic advance
Lubrication Wet sump
Starter Electric
Advertisement