![]()
No images available
Tap to enlarge
![]()
2016 Husqvarna FE 350 Overview
The 2016 Husqvarna FE 350 is an enduro / off-road motorcycle built around 349.7 cc of displacement. Under the tank sits a Single cylinder, four-stroke engine running Overhead Cams (OHC) valve actuation, a compression ratio of 12.8:1. 2016 Husqvarna FE 350 delivers 45 hp of peak power and Nm @ rpm of torque. From a practical standpoint, the 2016 FE 350 tips the scales at 109.2 kg, carries a 9.5-litre fuel tank, offers a seat height of 970 mm and spans a 1482±10 mm wheelbase. That's roughly 89.6 kg lighter than the average enduro / off-road motorcycle in our database. Scroll down for the complete 2016 Husqvarna FE 350 spec sheet covering every technical detail from suspension travel to tyre sizes.
2016 FE 350 - Pros & Cons
Strengths
-
⚡
Strong power output: 2016 Husqvarna FE 350 makes 45 hp with Nm @ rpm of torque - competitive figures for its class.
-
🔧
Fuel injection: The Keihin electronic fuel injection and 42mm throttle body system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.
Considerations
-
📏
Tall seat height: The 970 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.
-
⛽
Modest fuel capacity: The 9.5-litre tank means more frequent fuel stops on longer rides, which is worth planning around on touring routes.
-
⚙️
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.
Wear Points & Servicing Notes
Cooling system servicing
The Liquid cooling system, continuous circulation of cooling liquid with water pump system on the FE 350 needs a coolant change roughly every two years (or per the service schedule) - skipping it lets the coolant turn acidic and corrode the aluminium water passages over time.
Fuelling & injector care
Fuelling comes from Keihin electronic fuel injection and 42mm throttle body. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.
Suspension condition on used examples
Up front, the FE 350 runs WP Suspension Up Side Down 4CS forks and WP Monoshock with linkage at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.
Final drive maintenance
Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.
Frame & chassis check
The frame is Central tube frame made of chrome molybdenum steel tubing - worth a visual check for corrosion or impact damage around the head-stock and swingarm pivot on any used example, since frame damage is far costlier to fix than any service item.
Low-speed handling
At just 109.2 kg, the FE 350 is light enough to manhandle easily at a standstill - one of the practical advantages of its class.
FE 350 - Buying & Maintenance Guide
What to check before buying
When inspecting a used 2016 Husqvarna FE 350, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained FE 350 should fire up cleanly and settle to a smooth idle within a few seconds.
Oil and filter changes
Regular oil changes are the single most important maintenance task on any FE 350. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.
Fuel system care
The FE 350's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.
2016 Husqvarna FE 350 - Frequently Asked Questions
What engine does the 2016 Husqvarna FE 350 have?
The 2016 Husqvarna FE 350 uses a Single cylinder, four-stroke engine with 349.7 cc of displacement. It is liquid cooling system, continuous circulation of cooling liquid with water pump.
How much does the 2016 Husqvarna FE 350 weigh?
The 2016 Husqvarna FE 350 weighs 109.2 kg. This is the manufacturer's dry figure.
How much power does the 2016 Husqvarna FE 350 make?
The 2016 Husqvarna FE 350 produces 45 hp of power and Nm @ rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2016 Husqvarna FE 350?
The 2016 Husqvarna FE 350 has a 9.5-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 158-190 km between stops.
Is the 2016 Husqvarna FE 350 suitable for shorter riders?
The 2016 Husqvarna FE 350 has a seat height of 970 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2016 Husqvarna FE 350 have?
The 2016 Husqvarna FE 350 uses Single 260 mm with 4 pot brake caliper at the front and Single 220 mm with 1 pot brake caliper at the rear.
What tyre sizes does the 2016 Husqvarna FE 350 use?
The 2016 Husqvarna FE 350 runs 90/90-21 front and 140/90-18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2016 Husqvarna FE 350 have?
The 2016 Husqvarna FE 350 is fitted with a 6-speed, claw shifted transmission.
Husqvarna FE 350 Spec Evolution
The Husqvarna FE 350 was produced across 6 model years (2015-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2015 |
2017 |
2019 |
2021 |
2022 |
2023 |
| Dry Weight |
109.2 kg / 240.7 lbs |
109.3 kg / 241.0 lbs |
109.2 kg / 240.7 lbs |
106.8 kg / 235.4 lbs |
106.8 kg / 235.4 lbs |
106.8 kg / 235.5 lbs |
| Engine Detail |
Four stroke. single cylinder. DOHC. 4 valve |
Four stroke. single cylinder. DOHC. 4 valve |
Four stroke, single cylinder, DOHC, 4 valves |
Four stroke, single cylinder, DOHC, 4 valves |
Four stroke, single cylinder, DOHC, 4 valves |
- |
| Seat Height |
970 mm / 38.2 in |
970 mm / 38.2 in. |
970 mm / 38.2 in. |
950 mm / 37.4 in. |
950 mm / 37.4 in |
950 mm / 37.4 in. |
| Fuel Capacity |
9.5 Litres / 2.8 US gal |
9.5 Litres / 2.8 US gal |
8.5 Litres / 2.25 US gal |
8.20 litres / 2.17 US gallons |
9 Litres / 2.37 US gal |
9.00 litres / 2.38 US gallons |
| Ground Clearance (mm) |
345 mm |
345 mm |
345 mm |
360 mm |
360 mm |
360 mm |
| Ground Clearance (in.) |
13.6 inches |
13.6 inches |
13.6 inches |
14.2 inches |
14.2 inches |
14.2 inches |
| Fuel Control |
DOHC |
Overhead Cams (OHC) |
Double Overhead Cams/Twin Cam (DOHC) |
Double Overhead Cams/Twin Cam (DOHC) |
Double Overhead Cams/Twin Cam (DOHC) |
Double Overhead Cams/Twin Cam (DOHC) |
| Displacement (cc) |
- |
349.70 cc |
349.7 cc |
349.7 cc |
- |
349.7 cc |
Key Specifications
Engine
Single cylinder, four-stroke
Top Speed
Not published by manufacturer
Weight
109.2 kg / 240.7 lbs
Fuel Capacity
9.5 Litres / 2.8 US gal
Advertisement
Full 2016 Husqvarna FE 350 Specifications
Year
2016 - 17
Colours
Blue/yellow
Make Model
Husqvarna FE 350
Ground Clearance (mm)
345 mm
Ground Clearance (in.)
13.6 inches
Seat Height
970 mm / 38.2 in
Wheelbase
1482±10 mm / 58.3 in
Ground Clearance
345 mm / 13.6 in
Length
2260 mm / 89.0 in
Dry Weight
109.2 kg / 240.7 lbs
Fuel Capacity
9.5 Litres / 2.8 US gal
Fuel Control
Overhead Cams (OHC)
Engine Type
Single cylinder, four-stroke
Displacement
349.7 cc / 21.3 cu in
Engine Detail
Four stroke. single cylinder. DOHC. 4 valve
Bore x Stroke
88 x 57.5 mm
Compression Ratio
12.8:1
Cooling System
Liquid cooling system, continuous circulation of cooling liquid with water pump
Engine Lubrication
Forced oil lubrication with 2 Eaton pumps
Fuel Induction
Keihin electronic fuel injection and 42mm throttle body
Ignition
Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment
Lubrication
Forced oil lubrication with 2 Eaton pumps
Starter
Electric
Valve System
4
Clutch
Wet multi-disc clutch DDS / Brembo hydraulics
Final Drive
Chain 520 X-Ring
Gearbox
6-speed
Primary Drive
5/8 x 1/4
Primary Drive Ratios
24:73
Secondary Drive Ratio
14:52 (13:52)
Transmission / Drive
6-speed, claw shifted
Frame Type
Central tube frame made of chrome molybdenum steel tubing
Suspension - Front
WP Suspension Up Side Down 4CS forks.
Suspension - Rear
WP Monoshock with linkage
Rake
26.5°
Steering Head Angle
63.5°
Trail
107 mm / 4.2 in
Wheel Travel - Front
300 mm /11.8 in
Wheel Travel - Rear
330 mm / 13.0 in
Brakes - Front Diameter (in.)
10.2 inches
Brakes - Front Diameter (mm)
260 mm
Brakes - Rear Diameter (in.)
8.7 inches
Brakes - Rear Diameter (mm)
220 mm
Brakes - Front
Single 260 mm with 4 pot brake caliper
Brakes - Rear
Single 220 mm with 1 pot brake caliper
Tyres - Front
90/90-21
Tyres - Rear
140/90-18
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement