2014 Husaberg TE 300 Specifications

Name: 2014 Husaberg TE 300
Brand: Husaberg

Enduro / Off-Road • Specs last verified 13 July 2026

No images available

Tap to enlarge

2014 Husaberg TE 300 Overview

For 2014, Husaberg offers the TE 300 as an enduro / off-road motorcycle with 293.2 on tap. The 2014 Husaberg TE 300 is built around a Two stroke, single-cylinder engine. Out on the road, the TE 300 delivers NA of peak power and NA of torque. In everyday use, the 2014 TE 300 tips the scales at 103 kg, carries a 11-litre fuel tank, offers a seat height of 985 mm and spans a 1475 +± 10 mm wheelbase. That's roughly 95.8 kg lighter than the average enduro / off-road motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2014 Husaberg TE 300 spec sheet below.

2014 TE 300 - Pros & Cons

Strengths

Strong power output: Peak output on the TE 300 is NA and NA of torque - strong numbers for what it is.

Considerations

Tall seat height: A 985 mm seat puts flat-footing out of reach for a lot of riders - sit on it in person before committing.
Modest fuel capacity: A 11-litre tank keeps things light but means budgeting for more frequent fuel stops on any longer ride.
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.

Wear Points & Servicing Notes

Cooling system servicing

With Liquid cooled, thermal management is largely automatic, but the coolant has a service life of its own - replace it on the manufacturer's interval to protect the water passages and thermostat.

Suspension condition on used examples

Suspension duties are handled by Single 260mm 2 piston caliper up front and 90/90-21 at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.

Final drive maintenance

Chain final drive on the TE 300 means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.

Frame & chassis check

The Central double-cradle-type 25CrMo4, Aluminium Subframe chassis holds up well with normal use; on a used bike it's still worth checking the head-stock and swingarm pivot area for impact damage or corrosion.

Low-speed handling

The TE 300's 103 kg kerb weight makes low-speed control noticeably less effort than on a heavier machine.

TE 300 - Buying & Maintenance Guide

What to check before buying

A pre-purchase check on the 2014 Husaberg TE 300 should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept TE 300 settles to a smooth idle within seconds.

Oil and filter changes

Oil changes are the cheapest insurance you can buy for a TE 300's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.

Carburetor upkeep

A TE 300 that's sat unused is almost always a carb-cleaning job before it runs right again - float bowls and pilot jets first, since they clog before anything else.

2014 Husaberg TE 300 - Frequently Asked Questions

What engine does the 2014 Husaberg TE 300 have?

The 2014 Husaberg TE 300 uses a Two stroke, single-cylinder engine with 293.2 of displacement. It is liquid cooled.

How much does the 2014 Husaberg TE 300 weigh?

The 2014 Husaberg TE 300 weighs 103 kg. This is the manufacturer's wet figure.

How much power does the 2014 Husaberg TE 300 make?

The 2014 Husaberg TE 300 produces NA of power and NA of torque. These are peak figures.

What is the fuel tank capacity of the 2014 Husaberg TE 300?

The 2014 Husaberg TE 300 has a 11-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 183-220 km between stops.

Is the 2014 Husaberg TE 300 suitable for shorter riders?

The 2014 Husaberg TE 300 has a seat height of 985 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What gearbox does the 2014 Husaberg TE 300 have?

The 2014 Husaberg TE 300 is fitted with a 6 Speed transmission.

What fuel system does the 2014 Husaberg TE 300 use?

The 2014 Husaberg TE 300 uses Keihin PWK 36S AG, providing precise fuelling across the rev range and reliable cold-start behaviour.

Key Specifications

Engine

Two stroke, single-cylinder

Power

Torque

Top Speed

Not published by manufacturer

Weight

103 kg / 226 lbs

Fuel Capacity

11 Litres / 2.9 US gal

Full 2014 Husaberg TE 300 Specifications

Year 2013 - 14

Make Model Husaberg TE 300

Seat Height 985 mm / 38.7 in

Wheelbase 1475 +± 10 mm / 58.0 in

Ground Clearance 385 mm / 15.1 in

Fuel Capacity 11 Litres / 2.9 US gal

Wet Weight 103 kg / 226 lbs

Max Power NA

Max Torque NA

Displacement 293.2

Engine Detail Two stroke, single-cylinder

Bore x Stroke 72 x 72 mm

Cooling System Liquid cooled

Engine Oil Specification Motorex, SAE 15W-50

Fuel Induction Keihin PWK 36S AG

Ignition Kokusan

Starter Electric & Kick

Battery Capacity 12V 3Ah/12V 3Ah

Clutch Wet multi-disc clutch, hydraulically operated

Final Drive Chain X-Ring 5/8 x 1/4"

Transmission / Drive 6 Speed

Frame Type Central double-cradle-type 25CrMo4, Aluminium Subframe

Suspension - Front Single 260mm 2 piston caliper

Suspension - Rear 90/90-21

Steering Head Angle 63.5°

Wheel Travel - Front Single 220mm disc 1 piston caliper

Wheel Travel - Rear 140/80-18

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.