![]()
No images available
Tap to enlarge
![]()
2012 Honda CBF 1000 Overview
For 2012, Honda offers the CBF 1000 as a sport motorcycle with 998 cc on tap. The 2012 Honda CBF 1000 is built around an In-line four, four-stroke engine running DOHC valve actuation. Internally, bore and stroke are 75 x 56.5 mm. Out on the road, the CBF 1000 delivers 97 Nm @ 6500 of torque. In everyday use, the 2012 CBF 1000 tips the scales at 250 kg, carries a 19-litre fuel tank, offers a seat height of 795 mm and spans a 1,483 mm wheelbase. That's roughly 47.3 kg heavier than the average sport motorcycle in our database. Every technical detail, from suspension travel to tyre sizes, is covered in the full 2012 Honda CBF 1000 spec sheet below.
2012 CBF 1000 - Pros & Cons
Strengths
-
🔧
Fuel injection: No choke, no jetting, no altitude compensation to think about - fuel injection just works across a wider range of conditions than carburetion.
-
⛽
Large fuel range: With a 19-litre tank, this isn't a bike you'll be stopping for fuel every hour - a real asset on longer trips.
Considerations
-
⚙️
Chain final drive upkeep: A chain drivetrain is the most common setup in its class, but it's also the one that demands the most regular hands-on maintenance.
Wear Points & Servicing Notes
Fuelling & injector care
Fuelling on the CBF 1000 comes from fuel injection. Cold starts and throttle response stay consistent across altitude and temperature, the main practical edge over a carbureted equivalent.
Valve clearance checks
Valve clearances on DOHC-equipped engines like the CBF 1000's drift slowly with mileage rather than failing suddenly - sticking to the service interval keeps it a non-issue.
Brake disc and pad wear
Double disc. 2-piston caliper, sintered metal pads and Combined ABS up front provides the primary stopping power; inspect disc thickness and pad wear at each tyre change to catch scoring before it becomes a rotor replacement.
Suspension condition on used examples
Suspension duties are handled by 41 mm cartridge-type telescopic fork up front and Pro-Link with gas-charges HMAS damper at the rear. Weeping fork seals aren't a dealbreaker on a used bike, but they're a fair basis for negotiating price.
Final drive maintenance
Chain final drive on the CBF 1000 means routine lubing and tension checks are part of ownership - skip them and sprocket wear accelerates noticeably.
Handling the weight at a standstill
The CBF 1000's 250 kg kerb weight is worth factoring into how you handle it at a standstill - parking-lot manoeuvres need a bit more deliberate technique than on a lighter machine.
CBF 1000 - Buying & Maintenance Guide
What to check before buying
A pre-purchase check on the 2012 Honda CBF 1000 should cover the same ground every time: service history, chain and sprocket condition, and any oil seepage around the casings. Start it from cold if you can - a well-kept CBF 1000 settles to a smooth idle within seconds.
Oil and filter changes
Oil changes are the cheapest insurance you can buy for a CBF 1000's engine - keep to the manufacturer's interval rather than stretching it. Use the viscosity grade the manual specifies, not whatever's on sale.
Fuel system care
Injector systems like the CBF 1000's hold up well with basic care - decent fuel, an occasional cleaner additive, and draining old fuel before any layup longer than three months.
Valve clearance service
There's no reliable seat-of-the-pants way to tell if a CBF 1000's valve clearances are in spec - a light top-end tick is the only real warning sign, and by then some wear has already happened. Service records are the only proof.
2012 Honda CBF 1000 - Frequently Asked Questions
What engine does the 2012 Honda CBF 1000 have?
The 2012 Honda CBF 1000 uses an In-line four, four-stroke engine with 998 cc of displacement.
How much does the 2012 Honda CBF 1000 weigh?
The 2012 Honda CBF 1000 weighs 250 kg. This is the manufacturer's wet figure.
How much power does the 2012 Honda CBF 1000 make?
The 2012 Honda CBF 1000 produces 97 Nm @ 6500 of torque.
What is the fuel tank capacity of the 2012 Honda CBF 1000?
The 2012 Honda CBF 1000 has a 19-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 316-380 km between stops.
Is the 2012 Honda CBF 1000 suitable for shorter riders?
The 2012 Honda CBF 1000 has a seat height of 795 mm. This is a moderate seat height that suits a wide range of rider heights.
What brakes does the 2012 Honda CBF 1000 have?
The 2012 Honda CBF 1000 uses Double disc. 2-piston caliper, sintered metal pads and Combined ABS at the front and Single disc. 1-piston caliper, sintered metal pads and Combined ABS at the rear.
What tyre sizes does the 2012 Honda CBF 1000 use?
The 2012 Honda CBF 1000 runs 120/70-ZR17 front and 160/60-ZR17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
Honda CBF 1000 Spec Evolution
The Honda CBF 1000 was produced across 6 model years (2007-2014). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2007 |
2009 |
2011 |
2012 |
2013 |
2014 |
| Wet Weight |
241kg / 531.3 lbs |
241kg / 531.3 lbs |
241.0 kg / 531.3 lbs |
250.0 kg / 551.2 lbs |
250.0 kg / 551.2 lbs |
251.0 kg / 553.4 lbs |
| Dry Weight |
224.0 kg / 493.8 lbs |
220 kg / 485.0 lbs |
224 kg / 493.8 lbs |
88 kg / 194.0 lbs |
- |
- |
| Engine Detail |
Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder. |
Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder. |
- |
- |
- |
CBF1000 RR engine |
| Engine Type |
In-line four, four-stroke |
In-line four |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
In-line four, four-stroke |
| Seat Height |
795 mm / 31.3 in |
795 mm / 31.3 in. |
795 mm / 31.3 in. |
795 mm / 31.3 in. |
795 mm / 31.3 in. |
795 mm / 31.3 in. |
| Fuel Capacity |
19 Litres / 5.02 US gal |
19.00 litres / 5.02 gallons |
19.00 litres / 5.02 gallons |
19.00 litres / 5.02 gallons |
19.00 litres / 5.02 gallons |
19.00 litres / 5.02 gallons |
| Ground Clearance (mm) |
130 mm |
135 mm |
135 mm |
135 mm |
135 mm |
135 mm |
| Ground Clearance (in.) |
5.1 inches |
5.3 inches |
5.3 inches |
5.3 inches |
5.3 inches |
5.3 inches |
Key Specifications
Engine
In-line four, four-stroke
Power
Not published by manufacturer
Torque
97.00 Nm (9.9 kgf-m or 71.5 ft.lbs) @ 6500
Top Speed
Not published by manufacturer
Weight
250.0 kg / 551.2 lbs
Fuel Capacity
19.00 litres / 5.02 gallons
Advertisement
Full 2012 Honda CBF 1000 Specifications
Comments
French brand.
Colours
Red, silver, black, white
Ground Clearance (mm)
135 mm
Ground Clearance (in.)
5.3 inches
Seat Height
795 mm / 31.3 in.
Wheelbase
1,483 mm / 58.4 in.
Height
1,175 mm / 46.3 in.
Length
2,176 mm / 85.7 in.
Width
685 mm / 27.0 in.
Dry Weight
88 kg / 194.0 lbs
Fuel Capacity
19.00 litres / 5.02 gallons
Wet Weight
250.0 kg / 551.2 lbs
Fuel Control
DOHC
Engine Type
In-line four, four-stroke
Displacement (ci)
60.90 cubic inches
Bore x Stroke (in,)
3.0 x 2.2 inches
Bore x Stroke (mm)
75.0 x 56.5 mm
Displacement (cc)
998.00 cc
Fuel System
Injection. PGM-FI
Fuel Reserve
4.00 litres / 1.06 gallons
Ignition
Computer-controlled digital transistorised with electronic advance
Starter
Electric
Valve System
4
Final Drive
Chain
Gearbox
6-speed
Primary Drive
#530 O-ring sealed chain
Suspension - Front
41 mm cartridge-type telescopic fork
Suspension - Rear
Pro-Link with gas-charges HMAS damper
Seat
Dual
Wheel Travel - Front
120 mm / 4.7 in.
Wheel Travel - Rear
120 mm / 4.7 in.
Brakes - Rear Diameter (in.)
9.4 inches
Brakes - Rear Diameter (mm)
240 mm
Brakes - Front Diameter (mm)
296 mm
Brakes - Front Diameter (in.)
11.7 inches
Brakes - Front
Double disc. 2-piston caliper, sintered metal pads and Combined ABS
Brakes - Rear
Single disc. 1-piston caliper, sintered metal pads and Combined ABS
Rims
Hollow-section 6-spoke cast aluminium
Tyres - Front
120/70-ZR17
Tyres - Rear
160/60-ZR17
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement