1983 Honda CB 1100 R Specifications

Name: 1983 Honda CB 1100 R
Brand: Honda

No images available

Tap to enlarge

1983 Honda CB 1100 R Overview

The 1983 Honda CB 1100 R is a sport motorcycle built around 1062 cc of displacement. Under the tank sits an In-line four engine running DOHC valve actuation, a compression ratio of 10.0:1. The bore and stroke measures 70 x 69 mm. From a practical standpoint, the 1983 CB 1100 R tips the scales at 259 kg and carries a 26-litre fuel tank. Scroll down for the complete 1983 Honda CB 1100 R spec sheet covering every technical detail from suspension travel to tyre sizes.

1983 CB 1100 R - Pros & Cons

Strengths

Factory engineering: The 1983 Honda CB 1100 R represents Honda's engineering at the time, with a specification built around real-world usability.

Considerations

Age-related wear: As with any used CB 1100 R, a thorough pre-purchase inspection covering consumables, service history and tyres is always recommended.

Owner Experiences & Common Issues

Valve clearance checks

DOHC engines should have valve clearances checked at the manufacturer's specified interval. Owners report that clearances can tighten over time on higher-mileage bikes, leading to slight ticking from the top end. Catching it early keeps the job simple and avoids more costly remediation.

CB 1100 R - Buying & Maintenance Guide

What to check before buying

When inspecting a used 1983 Honda CB 1100 R, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained CB 1100 R should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any CB 1100 R. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used CB 1100 R. This is a job many owners skip because the bike does not immediately feel wrong - but tight clearances accelerate valve seat wear. Ask for proof it has been done.

1983 Honda CB 1100 R - Frequently Asked Questions

What engine does the 1983 Honda CB 1100 R have?

The 1983 Honda CB 1100 R uses an In-line four engine with 1062 cc of displacement.

How much does the 1983 Honda CB 1100 R weigh?

The 1983 Honda CB 1100 R weighs 259 kg. This is the manufacturer's wet figure.

What is the fuel tank capacity of the 1983 Honda CB 1100 R?

The 1983 Honda CB 1100 R has a 26-litre fuel tank.

What brakes does the 1983 Honda CB 1100 R have?

The 1983 Honda CB 1100 R uses Dual disc at the front and Single disc at the rear.

What tyre sizes does the 1983 Honda CB 1100 R use?

The 1983 Honda CB 1100 R runs 100/90-18 front and 130/80-18 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

What is the compression ratio of the 1983 Honda CB 1100 R?

The 1983 Honda CB 1100 R runs a compression ratio of 10.0:1. Always use the minimum octane rating specified in the owner's manual.

Honda CB 1100 R Spec Evolution

The Honda CB 1100 R was produced across 3 model years (1981-1983). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	1981	1982	1983
Engine Type	In-line four, four-stroke	In-line four	In-line four
Fuel Control	OHC	DOHC	DOHC
Tyres - Front	3.50-19	100/90-18	100/90-18
Tyres - Rear	130/90-18	130/80-18	130/80-18