![]()
No images available
Tap to enlarge
![]()
2026 Honda CB 1000GT Overview
The 2026 Honda CB 1000GT is a naked bike motorcycle built around 1000 cc of displacement. Under the tank sits a Four stroke, in-line four cylinder, DOHC, 4 valve per cylinder engine, a compression ratio of 11.7:1. 2026 Honda CB 1000GT delivers 147.6 hp @ 11000rpm of peak power and 102 Nm @ 8750 rpm of torque. From a practical standpoint, the 2026 CB 1000GT tips the scales at 229 kg, carries a 21-litre fuel tank, offers a seat height of 825 mm and spans a 1465 mm wheelbase. That's roughly 20.5 kg heavier than the average naked bike motorcycle in our database. Scroll down for the complete 2026 Honda CB 1000GT spec sheet covering every technical detail from suspension travel to tyre sizes.
2026 CB 1000GT - Pros & Cons
Strengths
-
⚡
Strong power output: 2026 Honda CB 1000GT makes 147.6 hp @ 11000rpm with 102 Nm @ 8750 rpm of torque - competitive figures for its class.
-
🔧
Fuel injection: The PGM-F1 Electronic fuel injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.
-
⛽
Large fuel range: The 21-litre tank is generously sized, translating to extended range between stops - ideal for touring or longer commutes.
Considerations
-
📏
Tall seat height: The 825 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.
-
⚙️
Chain final drive upkeep: Chain final drive needs regular cleaning, lubrication and tension checks to get full life out of the sprockets.
Wear Points & Servicing Notes
Cooling system servicing
The Liquid cooled system on the CB 1000GT needs a coolant change roughly every two years (or per the service schedule) - skipping it lets the coolant turn acidic and corrode the aluminium water passages over time.
Fuelling & injector care
Fuelling comes from PGM-F1 Electronic fuel injection. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.
Brake disc and pad wear
The 2 x 310mm discs, radial mounted 4-piston caliper Nissen front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.
Suspension condition on used examples
Up front, the CB 1000GT runs Electronically controlled suspension and Electronically controlled suspension at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.
Final drive maintenance
Final drive is by chain - expect to clean and lube it every few hundred kilometres and check tension regularly; a neglected chain wears the sprockets faster than the chain itself.
Frame & chassis check
The frame is Diamond frame, steel - worth a visual check for corrosion or impact damage around the head-stock and swingarm pivot on any used example, since frame damage is far costlier to fix than any service item.
Handling the weight at a standstill
At 229 kg, the CB 1000GT is a substantial machine - low-speed manoeuvring in car parks takes more physical effort than on a lighter bike, though the weight disappears once rolling.
CB 1000GT - Buying & Maintenance Guide
What to check before buying
When inspecting a used 2026 Honda CB 1000GT, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained CB 1000GT should fire up cleanly and settle to a smooth idle within a few seconds.
Oil and filter changes
Regular oil changes are the single most important maintenance task on any CB 1000GT. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.
Fuel system care
The CB 1000GT's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.
2026 Honda CB 1000GT - Frequently Asked Questions
What engine does the 2026 Honda CB 1000GT have?
The 2026 Honda CB 1000GT uses a Four stroke, in-line four cylinder, DOHC, 4 valve per cylinder engine with 1000 cc of displacement. It is liquid cooled.
How much does the 2026 Honda CB 1000GT weigh?
The 2026 Honda CB 1000GT weighs 229 kg. This is the manufacturer's wet figure.
How much power does the 2026 Honda CB 1000GT make?
The 2026 Honda CB 1000GT produces 147.6 hp @ 11000rpm of power and 102 Nm @ 8750 rpm of torque. These are peak figures.
What is the fuel tank capacity of the 2026 Honda CB 1000GT?
The 2026 Honda CB 1000GT has a 21-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 350-420 km between stops.
Is the 2026 Honda CB 1000GT suitable for shorter riders?
The 2026 Honda CB 1000GT has a seat height of 825 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2026 Honda CB 1000GT have?
The 2026 Honda CB 1000GT uses 2 x 310mm discs, radial mounted 4-piston caliper Nissen at the front and Single 240mm disc, Nissen single piston at the rear.
What tyre sizes does the 2026 Honda CB 1000GT use?
The 2026 Honda CB 1000GT runs 120/70 ZR17M/C front and 180/55 ZR17M/C rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2026 Honda CB 1000GT have?
The 2026 Honda CB 1000GT is fitted with a 6 Speed transmission.
Key Specifications
Engine
Four stroke, in-line four cylinder, DOHC, 4 valve per cylinder
Power
147.6 hp / 110 kW @ 11000rpm
Torque
102 Nm / 75.2 ft-lb @ 8750 rpm
Top Speed
Not published by manufacturer
Fuel Capacity
21 Litres / 5.5 US gal
Advertisement
Full 2026 Honda CB 1000GT Specifications
Year
2026
Make Model
Honda CB 1000GT
Seat Height
825 mm / 32.5 in
Wheelbase
1465 mm / 57.7 in
Ground Clearance
135 mm / 5.3 in
Height
1290 mm / 50.8.3 in
Length
2135 mm / 84.0 in
Width
930 mm / 36.6 in
Fuel Capacity
21 Litres / 5.5 US gal
Wet Weight
229 kg / 505 lbs
Displacement
1000 cc / 61 cu-in
Engine Detail
Four stroke, in-line four cylinder, DOHC, 4 valve per cylinder
Bore x Stroke
76 x 55.1 mm
Compression Ratio
11.7:1
Cooling System
Liquid cooled
Emissions
Euro 5+
Fuel Induction
PGM-F1 Electronic fuel injection
Ignition
Computer controlled digital transistorized
Lubrication
Wet sump
Starter
Electric
Battery Capacity
AGM 12V 9.1Ah
Clutch
Wet, multiplate, assisted slipper clutch
Final Drive
Chain
Transmission / Drive
6 Speed
Frame Type
Diamond frame, steel
Suspension - Front
Electronically controlled suspension (EERA), manual preload adjuster
Suspension - Rear
Electronically controlled suspension (EERA), electronic preload adjuster
Wheel Travel - Front
130 mm / 5.1 in
Wheel Travel - Rear
140 mm / 5.5 in
Brakes - Front
2 x 310mm discs, radial mounted 4-piston caliper Nissen
Brakes - Rear
Single 240mm disc, Nissen single piston
ABS
2-Channel 6-axis IMU-based Cornering ABS
Tyres - Front
120/70 ZR17M/C (58W)
Tyres - Rear
180/55 ZR17M/C (73W)
Wheels - Front
17M/C x MT3.50
Wheels - Rear
17M/C x MT5.50
Specifications are compiled from manufacturer documentation and cross-referenced
technical sources, and corrected on an ongoing basis.
Spot an error? Let us know.
Advertisement