2016 Harley-Davidson Dyna Fat Bob Specifications

Custom / cruiser

Advertisement
No images available
Tap to enlarge

2016 Harley-Davidson Dyna Fat Bob Overview

The 2016 Harley-Davidson Dyna Fat Bob is a custom / cruiser motorcycle built around 1690 cc of displacement. Under the tank sits a Four stroke, V-Twin, Twin Cam 103° with integrated oil cooler engine, a compression ratio of 9.6:1. 2016 Harley-Davidson Dyna Fat Bob delivers 132 Nm @ 3250 rpm of torque. From a practical standpoint, the 2016 Dyna Fat Bob tips the scales at 321 kg, carries a 18 9 litres fuel tank, offers a seat height of Unladen 690 mm and spans a 1620 mm wheelbase. Scroll down for the complete 2016 Harley-Davidson Dyna Fat Bob spec sheet covering every technical detail from suspension travel to tyre sizes.

2016 Dyna Fat Bob - Pros & Cons

Strengths

  • Accessible seat height: At Unladen 690 mm, the seat height is approachable for a wide range of rider heights and builds confidence in low-speed manoeuvring.
  • Large fuel range: The 18 9 litres tank is generously sized, translating to extended range between stops - ideal for touring or longer commutes.

Considerations

  • Age-related wear: As with any used Dyna Fat Bob, a thorough pre-purchase inspection covering consumables, service history and tyres is always recommended.

Owner Experiences & Common Issues

Low-speed confidence

At 321 kg, the Dyna Fat Bob is a substantial machine. New owners occasionally mention that slow-speed manoeuvring in car parks takes a little getting used to. Once moving, the weight disappears - but practising slow-speed exercises builds confidence quickly.

Dyna Fat Bob - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2016 Harley-Davidson Dyna Fat Bob, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained Dyna Fat Bob should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any Dyna Fat Bob. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

2016 Harley-Davidson Dyna Fat Bob - Frequently Asked Questions

What engine does the 2016 Harley-Davidson Dyna Fat Bob have?
The 2016 Harley-Davidson Dyna Fat Bob uses a Four stroke, V-Twin, Twin Cam 103° with integrated oil cooler engine with 1690 cc of displacement. It is air cooled.
How much does the 2016 Harley-Davidson Dyna Fat Bob weigh?
The 2016 Harley-Davidson Dyna Fat Bob weighs 321 kg. This is the manufacturer's wet figure.
How much power does the 2016 Harley-Davidson Dyna Fat Bob make?
The 2016 Harley-Davidson Dyna Fat Bob produces 132 Nm @ 3250 rpm of torque.
What is the fuel tank capacity of the 2016 Harley-Davidson Dyna Fat Bob?
The 2016 Harley-Davidson Dyna Fat Bob has a 18 9 litres fuel tank. At around 5-6 litres per 100 km, that is roughly 300-360 km between stops.
Is the 2016 Harley-Davidson Dyna Fat Bob suitable for shorter riders?
The 2016 Harley-Davidson Dyna Fat Bob has a seat height of Unladen 690 mm. This is a comfortable, accessible height for most riders.
What brakes does the 2016 Harley-Davidson Dyna Fat Bob have?
The 2016 Harley-Davidson Dyna Fat Bob uses Single 300mm disc, 4 piston fixed caliper at the front and Single 292mm disc, 2 piston torque-free floating caliper at the rear.
What tyre sizes does the 2016 Harley-Davidson Dyna Fat Bob use?
The 2016 Harley-Davidson Dyna Fat Bob runs 130/90B16 67 front and 180/70B16 77H rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2016 Harley-Davidson Dyna Fat Bob have?
The 2016 Harley-Davidson Dyna Fat Bob is fitted with a 6 Speed transmission.

Harley-Davidson Dyna Fat Bob Spec Evolution

The Harley-Davidson Dyna Fat Bob was produced across 2 model years (2015-2017). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification 2015 2017
Wet Weight 320 kg / 706 lbs 321 kg / 708 lbs
Seat Height Laden 663 mm / 26.1 in Unladen 686 mm / 27.0 in Unladen 690 mm / 27.2 in
Fuel Capacity 18.9 Litres / 5.0 US gal 18 9 Litres / 5.0 US gal
Brakes - Front Single 300mm disc 4 piston caliper Single 300mm disc, 4 piston fixed caliper
Wheelbase 1618 mm / 63.7 in. 1620 mm / 63.8 in.
Brakes - Rear Single 292mm disc 2 piston caliper Single 292mm disc, 2 piston torque-free floating caliper
Bore x Stroke 98.4 x 111.3 mm 98.4 x 111.1 mm
Oil Capacity 2.8 Litres / 3.0 qts 2.8 Litres / 3.0 US qt

Key Specifications

Engine

Four stroke, V-Twin, Twin Cam 103° with integrated oil cooler

Power

N/A

Torque

132 Nm / 13.5 kgf-m / 98.0 ft/ lbs @ 3250 rpm

Top Speed

N/A

Weight

321 kg / 708 lbs

Fuel Capacity

18 9 Litres / 5.0 US gal

Advertisement

Full 2016 Harley-Davidson Dyna Fat Bob Specifications

Year 2016 - 17
Make Model Harley Davidson Dyna Fat Bob
Max Torque 132 Nm / 13.5 kgf-m / 98.0 ft/ lbs @ 3250 rpm
Displacement 1690 cc / 103 cu. in
Engine Detail Four stroke, V-Twin, Twin Cam 103° with integrated oil cooler
Bore x Stroke 98.4 x 111.1 mm
Compression Ratio 9.6:1
Cooling System Air cooled
Exhaust Chrome, "Tommy Gun" 2-1-2 collector exhaust with dual mufflers
Fuel Consumption 5.6 L/100 km / 17.9 km/l / 42 US mpg
Fuel Induction Electronic Sequential Port Fuel Injection (ESPFI)
Ignition Single-fire, non-wasted, map-controlled spark ignition
Starter Electric
Advertisement

Compare Harley-Davidson Dyna Fat Bob

See how the 2016 Harley-Davidson Dyna Fat Bob stacks up against similar motorcycles.

Build your own comparison →

Harley-Davidson Dyna Fat Bob - other years