2019 BMW K 1600 B Specifications

Name: 2019 BMW K 1600 B
Brand: BMW

Touring • Specs last verified 13 July 2026

No images available

Tap to enlarge

2019 BMW K 1600 B Overview

The 2019 BMW K 1600 B is a touring motorcycle built around 1649 cc of displacement. Under the tank sits an In-line six, four-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation, a compression ratio of 12.2:1. The bore and stroke measures 72 x 67.5 mm. 2019 BMW K 1600 B delivers 175 Nm @ 5520 Revolutions of torque. The factory-quoted top speed stands at 200 km/h, making it a capable performer in its class. From a practical standpoint, the 2019 K 1600 B tips the scales at 336 kg, carries a 26.50-litre fuel tank, offers a seat height of 750 mm and spans a 1618 mm wheelbase. That's roughly 12.3 kg heavier than the average touring motorcycle in our database. Scroll down for the complete 2019 BMW K 1600 B spec sheet covering every technical detail from suspension travel to tyre sizes.

2019 K 1600 B - Pros & Cons

Strengths

Fuel injection: The fuel injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.
Accessible seat height: At 750 mm, the seat height is approachable for a wide range of rider heights and builds confidence in low-speed manoeuvring.
Large fuel range: The 26.50-litre tank is generously sized, translating to extended range between stops - ideal for touring or longer commutes.
Low-maintenance final drive: Shaft drive (cardan) (final drive) final drive means no chain to clean, lube or adjust - meaningfully less routine maintenance than a chain-driven equivalent.

Considerations

Age-related wear: As with any used K 1600 B, a thorough pre-purchase inspection covering consumables, service history and tyres is always recommended.

Wear Points & Servicing Notes

Fuelling & injector care

Fuelling comes from fuel injection. Systems like this are largely maintenance-free beyond keeping fuel quality decent and injectors clear - a fuel-system cleaner every service interval is cheap insurance.

Valve clearance checks

Double Overhead Cams/Twin Cam (DOHC) valve actuation on the K 1600 B means clearances should be checked at the manufacturer's specified interval - they can tighten as mileage accumulates, and a light top-end tick is usually the first sign.

Brake disc and pad wear

The Double disc. ABS. Four-piston calipers. front brake gives strong, progressive stopping power. Disc thickness and pad depth are worth checking at every tyre change, since worn pads can score the disc surface.

Suspension condition on used examples

Up front, the K 1600 B runs BMW Motorrad Duolever and BMW Motorrad Paralever at the rear. On a used example, check fork seals for weeping oil and test the rear linkage for play - seals are a relatively cheap fix but useful when negotiating price.

Final drive maintenance

Final drive is by shaft - no chain or belt maintenance at all, though the drive-shaft oil should be changed on the manufacturer's interval.

Frame & chassis check

The frame is Bridge-type frame, cast aluminium, load-bearing engine - worth a visual check for corrosion or impact damage around the head-stock and swingarm pivot on any used example, since frame damage is far costlier to fix than any service item.

Handling the weight at a standstill

At 336 kg, the K 1600 B is a substantial machine - low-speed manoeuvring in car parks takes more physical effort than on a lighter bike, though the weight disappears once rolling.

K 1600 B - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2019 BMW K 1600 B, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained K 1600 B should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any K 1600 B. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The K 1600 B's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used K 1600 B. A bike with clearances out of spec doesn't always feel obviously wrong - but tight clearances accelerate valve seat wear. Ask for service documentation proving it's been done.

2019 BMW K 1600 B - Frequently Asked Questions

What engine does the 2019 BMW K 1600 B have?

The 2019 BMW K 1600 B uses an In-line six, four-stroke engine with 1649 cc of displacement.

What is the top speed of the 2019 BMW K 1600 B?

The 2019 BMW K 1600 B has a factory-quoted top speed of 200 km/h. Real-world speeds vary depending on rider weight, conditions and state of tune.

How much does the 2019 BMW K 1600 B weigh?

The 2019 BMW K 1600 B weighs 336 kg. This is the manufacturer's wet figure.

How much power does the 2019 BMW K 1600 B make?

The 2019 BMW K 1600 B produces 175 Nm @ 5520 Revolutions of torque.

What is the fuel tank capacity of the 2019 BMW K 1600 B?

The 2019 BMW K 1600 B has a 26.50-litre fuel tank. At around 5-6 litres per 100 km, that is roughly 441-530 km between stops.

Is the 2019 BMW K 1600 B suitable for shorter riders?

The 2019 BMW K 1600 B has a seat height of 750 mm. This is a comfortable, accessible height for most riders.

What brakes does the 2019 BMW K 1600 B have?

The 2019 BMW K 1600 B uses Double disc. ABS. Four-piston calipers. at the front and Single disc. ABS. Two-piston calipers. at the rear.

What tyre sizes does the 2019 BMW K 1600 B use?

The front tyre size on the 2019 BMW K 1600 B is 120/70-ZR17.

BMW K 1600 B Spec Evolution

The BMW K 1600 B was produced across 7 model years (2017-2023). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2017	2018	2019	2020	2021	2022	2023
Wet Weight	-	336.0 kg / 740.8 lbs	336.0 kg / 740.8 lbs	336.0 kg / 740.8 lbs	336.0 kg / 740.8 lbs	343.8 kg / 758.0 lbs	343.8 kg / 758.0 lbs
Engine Type	Two cylinder boxer, two-stroke	In-line six, four-stroke	In-line six, four-stroke	In-line six, four-stroke	In-line six, four-stroke	In-line six, four-stroke	In-line six, four-stroke
Top Speed	-	-	200.0 km/h / 124.3 mph	-	201.2 km/h / 125.0 mph	193.1 km/h / 120.0 mph	193.1 km/h / 120.0 mph
Fuel Capacity	26.50 litres / 7.00 gallons	26.50 litres / 7.00 gallons	26.50 litres / 7.00 US gallons	26.50 litres / 7.00 US gallons	26.50 litres / 7.00 US gallons	26.50 litres / 7.00 US gallons	26.50 litres / 7.00 US gallons
Displacement (cc)	1649.00 cc	1649.00 cc	1649.0 cc	1649.0 cc	1649.0 cc	1649.0 cc	1649.0 cc
Comments	Windscreen	Windscreen. Dynamic Traction Control.	-	-	Cruise control, DTC (Dynamic Traction Control), Dynamic ESA (Electronic Suspension Adjustment), Seat heating	Cruise control, DTC (Dynamic Traction Control), Dynamic ESA (Electronic Suspension Adjustment), Seat and grip heating, Tire Pressure Monitor.	Cruise control, DTC (Dynamic Traction Control), Dynamic ESA (Electronic Suspension Adjustment), Seat and grip heating. Tire Pressure Monitor. Windscreen.
Frame Type	Bridge-type frame, cast aluminium, load-bearing engine	Bridge-type frame, cast aluminium, load-bearing engine	Bridge-type frame, cast aluminium, load-bearing engine	Bridge-type frame, cast aluminium, load-bearing engine	Aluminum bridge-type frame with load-bearing engine	Bridge-type, cast aluminum, load-bearing engine	Bridge-type, cast aluminum, load-bearing engine
Wheelbase	-	1,720 mm / 67.7 in.	1618 mm / 63.7 in.	1618 mm / 63.7 in.	1618 mm / 63.7 in.	1618 mm / 63.7 in.	1618 mm / 63.7 in.

Key Specifications

Engine

In-line six, four-stroke

Power

Not published by manufacturer

Torque

175.0 Nm (17.8 kgf-m or 129.1 ft.lbs) @ 5520 Revolutions

Top Speed

200.0 km/h / 124.3 mph

Weight

336.0 kg / 740.8 lbs

Fuel Capacity

26.50 litres / 7.00 US gallons

Full 2019 BMW K 1600 B Specifications

Colours Imperial Blue Metallic, Black Storm Metallic

Storage Saddle bags

Seat Heigth -Alternate (mm) 780 mm

Seat Heigth -Alternate (in.) 30.7 inches

Seat Height 750 mm / 29.5 in.

Wheelbase 1618 mm / 63.7 in.

Height 1465 mm / 57.7 in.

Length 2489 mm / 98.0 in.

Width 1000 mm / 39.4 in.

Fuel Capacity 26.50 litres / 7.00 US gallons

Wet Weight 336.0 kg / 740.8 lbs

Top Speed 200.0 km/h / 124.3 mph

Max Torque 175.0 Nm (17.8 kgf-m or 129.1 ft.lbs) @ 5520 Revolutions

Fuel Control Double Overhead Cams/Twin Cam (DOHC)

Engine Type In-line six, four-stroke

Displacement (ci) 100.62 cubic inches

Displacement (cc) 1649.0 cc

CO2 132.2 CO2 g/km. (CO2 - Carbon dioxide emission)

Bore x Stroke (mm) 72.0 x 67.5 mm

Bore x Stroke (in,) 2.8 x 2.7 inches

Fuel System Injection. Electronic intake pipe injection

Compression Ratio 12.2:1

Emissions Closed-loop 3-way catalytic converter, emission standard EU-4

Engine Lubrication Dry sump

Fuel Consumption 5.70 litres/100 km (17.5 km/l or 41.27 mpg)

Fuel Reserve 4.00 litres / 1.06 US gallons

Starter Electric

Valve System 4

Clutch Multiple-disc clutch in oil bath

Final Drive Shaft drive (cardan) (final drive)

Gearbox 6-speed

Frame Type Bridge-type frame, cast aluminium, load-bearing engine

Suspension - Front BMW Motorrad Duolever

Suspension - Rear BMW Motorrad Paralever

Rake 27.8°

Trail 108 mm / 4.3 in.

Wheel Travel - Front 125 mm / 4.9 in.

Wheel Travel - Rear 135 mm / 5.3 in.

Brakes - Front Double disc. ABS. Four-piston calipers.

Brakes - Rear Single disc. ABS. Two-piston calipers.

Tyres - Front 120/70-ZR17

Specifications are compiled from manufacturer documentation and cross-referenced technical sources, and corrected on an ongoing basis. Spot an error? Let us know.