No images available
Tap to enlarge
2019 Aprilia RSV-4 Factory Overview
The 2019 Aprilia RSV-4 Factory is a sport motorcycle built around 1077 cc of displacement. Under the tank sits a Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder engine, a compression ratio of 13.6:1. 2019 Aprilia RSV-4 Factory delivers 217 hp @ 13200 rpm of peak power and 122 Nm @ 11000 rpm [115 Nm at 10,500 rpm] of torque. From a practical standpoint, the 2019 RSV-4 Factory tips the scales at 204 kg, carries a 18.5-litre fuel tank, offers a seat height of 853 mm and spans a 1441.6 mm wheelbase. Scroll down for the complete 2019 Aprilia RSV-4 Factory spec sheet covering every technical detail from suspension travel to tyre sizes.
2019 RSV-4 Factory - Pros & Cons
Strengths
-
⚡
Strong power output: 2019 Aprilia RSV-4 Factory makes 217 hp @ 13200 rpm with 122 Nm @ 11000 rpm [115 Nm at 10,500 rpm] of torque - competitive figures for its class.
Considerations
-
📏
Tall seat height: The 853 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.
Owner Experiences & Common Issues
General ownership notes
The 2019 Aprilia RSV-4 Factory has built a reputation for solid everyday reliability when serviced to schedule. As with any motorcycle of this era, documented service history is the single biggest indicator of long-term reliability when buying used.
RSV-4 Factory - Buying & Maintenance Guide
What to check before buying
When inspecting a used 2019 Aprilia RSV-4 Factory, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained RSV-4 Factory should fire up cleanly and settle to a smooth idle within a few seconds.
Oil and filter changes
Regular oil changes are the single most important maintenance task on any RSV-4 Factory. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.
2019 Aprilia RSV-4 Factory - Frequently Asked Questions
What engine does the 2019 Aprilia RSV-4 Factory have?
The 2019 Aprilia RSV-4 Factory uses a Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder engine with 1077 cc of displacement. It is liquid cooled.
How much does the 2019 Aprilia RSV-4 Factory weigh?
The 2019 Aprilia RSV-4 Factory weighs 204 kg. This is the manufacturer's wet figure.
How much power does the 2019 Aprilia RSV-4 Factory make?
The 2019 Aprilia RSV-4 Factory produces 217 hp @ 13200 rpm of power and 122 Nm @ 11000 rpm [115 Nm at 10,500 rpm] of torque. These are peak figures.
What is the fuel tank capacity of the 2019 Aprilia RSV-4 Factory?
The 2019 Aprilia RSV-4 Factory has a 18.5-litre fuel tank.
Is the 2019 Aprilia RSV-4 Factory suitable for shorter riders?
The 2019 Aprilia RSV-4 Factory has a seat height of 853 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.
What brakes does the 2019 Aprilia RSV-4 Factory have?
The 2019 Aprilia RSV-4 Factory uses 2 x 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo StylemaØ [M50] monobloc radial callipers with 4 30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose at the front and Single220 mm diameter disc; Brembo calliper with two 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose Bosch 9.1 MP ABS with cornering function, adjustable to 3 maps equipped with RLM at the rear.
What tyre sizes does the 2019 Aprilia RSV-4 Factory use?
The 2019 Aprilia RSV-4 Factory runs 120/70 ZR17 front and 200/55 ZR 17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.
What gearbox does the 2019 Aprilia RSV-4 Factory have?
The 2019 Aprilia RSV-4 Factory is fitted with a 6 Speed gearbox cassette type transmission.
Aprilia RSV-4 Factory Spec Evolution
The Aprilia RSV-4 Factory was produced across 4 model years (2009-2021). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.
| Specification |
2009 |
2019 |
2020 |
2021 |
| Max Power |
132 kW / 180 hp @ 12500 rpm |
217 hp / 159.6 kW @ 13200 rpm |
217 hp / 159.6 kW @ 13200 rpm |
217 hp / 159.6 kW @ 13000 rpm |
| Wet Weight |
205 Kg / 453 lbs |
204 kg / 450 lbs |
204 kg / 450 lbs |
202 kg / 445 lbs |
| Dry Weight |
179 Kg / 395 lbs |
182 kg / 401 lbs |
182 kg / 401 lbs |
- |
| Engine Detail |
Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder |
Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder |
Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder |
Four stroke, longitudinal 65° V4 , DOHC, 4 valves per cylinder |
| Seat Height |
845 mm / 33.3 in |
853 mm / 33.5 in |
853 mm / 33.5 in |
845 mm / 33.3 in |
| Fuel Capacity |
17 L / 4.5 US gal |
18.5 Litres / 4.9 US gal |
18.5 Litres / 4.9 US gal |
17.9 Litres / 4.7 US gal |
| Displacement |
998.9 cc / 61 cu in |
1077 cc / 85.7 cu-in |
1077 cc / 85.7 cu-in |
1099 cc / 67 cu-in |
| Frame Type |
Twin beam aluminium frame with mixed cast and pressed sheet sections. Adjustments for headstock position and angle, engine height, swingarm pivot height. |
Aluminium dual beam chassis with pressed and cast sheet elements Available adjustments: headstock position and rake; engine height; swingarm pin height. Smart EC 2.0 electronically managed Öhlins steering damper |
Aluminium dual beam chassis with pressed and cast sheet elements Available adjustments: headstock position and rake; engine height; swingarm pin height. Smart EC 2.0 electronically managed Öhlins steering damper |
- |
Key Specifications
Engine
Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder
Power
217 hp / 159.6 kW @ 13200 rpm
Torque
122 Nm / 90 lb-ft @ 11000 rpm [115 Nm at 10,500 rpm]
Fuel Capacity
18.5 Litres / 4.9 US gal
Advertisement
Full 2019 Aprilia RSV-4 Factory Specifications
Year
2019
Make Model
Aprilia RSV-4 Factory
Seat Height
853 mm / 33.5 in
Wheelbase
1441.6 mm / 56.7 in
Ground Clearance
130 mm / 5.1 in
Length
2055 mm / 80.9 in
Width
735 mm / 28.9 in (at the handlebar)
Dry Weight
182 kg / 401 lbs
Fuel Capacity
18.5 Litres / 4.9 US gal
Wet Weight
204 kg / 450 lbs
Displacement
1077 cc / 85.7 cu-in
Engine Detail
Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder
Bore x Stroke
81 x 52.3 mm
Compression Ratio
13.6:1
Cooling System
Liquid cooled
Emissions
Euro 4
Exhaust
4 into 2 into 1 layout, two lambda probes, lateral single silencer with ECU-controlled bypass valve and integrated trivalent catalytic converter
Fuel Induction
Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and latest generation Ride-By-Wire engine management. Choice of three different engine maps selectable by the rider with bike in motion: Track, Sport, Race
Fuel Reserve
4 Liters / 1.1 US gal
Ignition
Magneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and °stick-coil"-type coils
Lubrication
Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Starter
Electric
Clutch
Multi-disc oil bath with mechanical slipper system
Final Drive
Chain
Transmission / Drive
6 Speed gearbox cassette type
Frame Type
Aluminium dual beam chassis with pressed and cast sheet elements Available adjustments: headstock position and rake; engine height; swingarm pin height. Smart EC 2.0 electronically managed Öhlins steering damper
Suspension - Front
Smart EC 2.0 electronically managed Öhlins NIX fork. 43 mm stanchions, with TIN surface treatment. [Sachs fork with 43 mm stanchions]; Aluminium radial calliper mounting bracket. Adjustable spring pre-load and hydraulic compression and rebound damping.
Suspension - Rear
Double braced aluminium swingarm; mixed low thickness and sheet casting technology. Öhlins TTX monoshock with Smart EC 2.0 electronically managed piggy-back, fully adjustable in: spring pre-load, wheelbase and hydraulic compression and rebound damping.
Steering Angle
24.5°
Trail
103 mm / 4.0 in
Wheel Travel - Front
120 mm / 4.7 in
Wheel Travel - Rear
130 mm / 5.1 in
Traction control
APRC System (Aprilia Performance Ride Control), which includes Traction Control (ATC), Wheelie Control (AWC), Launch Control (ALC), cruise control (ACC) and speed limiter (APT), all of which can be configured and deactivated independently
Alternator
Flywheel mounted 450 W alternator with rare earth magnets
Brakes - Front
2 x 330-mm diameter floating stainless steel disc with lightweight stainless steel rotor and aluminium flange with 6 pins. Brembo StylemaØ [M50] monobloc radial callipers with 4 30 mm opposing pistons. Sintered pads. Radial pump and metal braided brake hose
Brakes - Rear
Single220 mm diameter disc; Brembo calliper with two 32 mm separate pistons. Sintered pads. Pump with integrated tank and metal braided hose Bosch 9.1 MP ABS with cornering function, adjustable to 3 maps equipped with RLM (Rear wheel Lift-up Mitigation) (can be disabled).
Tyres
Radial tubeless
Tyres - Front
120/70 ZR17
Tyres - Rear
200/55 ZR 17 (alternative: 190/50 ZR 17; 190/55 ZR 17)
Wheels
Aprilia in aluminium alloy wheels with 3 split spoke design
Wheels - Front
3.5 x 17
Wheels - Rear
6.0 x 17
Advertisement
Compare Aprilia RSV-4 Factory
See how the 2019 Aprilia RSV-4 Factory
stacks up against similar motorcycles.
Build your own comparison →