1986 Yamaha FJ 1200 vs 1989 Honda CBR 1000F
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Year | 1986 | - |
| Make Model | Yamaha FJ 1200 | - |
| Dimensions |
| Seat Height | 780 mm / 30.7 in | - |
| Wheelbase | 1490 mm / 58.7in | - |
| Ground Clearance | 140 mm / 5.5 in | - |
| Height | 1,245mm / 49.0 in | - |
| Length | 2230 mm / 87.8 in | - |
| Width | 775 mm / 30.5 in | - |
| Weights & Capacities |
| Dry Weight | 245 kg / 540.1 lbs | - |
| Fuel Capacity | 22 Litres / 5.8 gal | 21.00 litres / 5.55 gallons |
| Oil Capacity | 4.2 Litres | - |
| Wet Weight | 259 kg / 571 lbs | 262.0 kg / 577.6 lbs |
| Performance |
| Top Speed | 244.3 km/h / 151.8 mph | 237.0 km/h / 147.3 mph |
| Braking (60 km/h - 0) | 14.1 m / 40.0 m | - |
| Max Power | 130 hp / 94.9 kW @ 9000 rpm | - |
| Max Power - Rear Tyre | 112.5 hp @ 8600 rpm | - |
| Max Torque | 108 Nm / 79.6 lb-ft @ 7500 rpm | - |
| Standing Start ¼ Mile | 10.9 sec / 200.3 km/h | - |
| Engine |
| Stroke | - | 4 |
| Fuel Control | - | DOHC |
| Engine Type | - | In-line four |
| Displacement (ci) | - | 60.90 cubic inches |
| Displacement (cc) | - | 998.00 cc |
| Bore x Stroke (mm) | - | 77.0 x 53.6 mm |
| Bore x Stroke (in,) | - | 3.0 x 2.1 inches |
| Displacement | 1188 cc / 72.5 cu in | - |
| Engine Detail | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. | - |
| Bore x Stroke | 77 x 63.8 mm | - |
| Compression Ratio | 9.7:1 | 10.5:1 |
| Cooling System | Air/oil cooled, | - |
| Engine Oil Specification | 20W/40 | - |
| Fuel Consumption | 14.5 km/lit | - |
| Fuel Induction | 4x Mikuni BS36 36 mm carburettors | - |
| Ignition | TCI (Transistor Controlled Ignition) | - |
| Lubrication | Wet sump | - |
| Spark Plug | NGK, DP8EA-9 | - |
| Starter | Starting | - |
| Valve System | - | 4 |
| Drivetrain |
| Clutch | Wet, multiple discs, hydraulic operated | - |
| Final Drive | Chain 2.353 (40/17) | Chain |
| Gear Ratios | 1st 2.857 (40/14) 2nd 2.000 (36/18) 3rd 1.571 (33/21) 4th 1.291 (31/24) 5th 1.115 (29/26) | - |
| Gearbox | - | 6-speed |
| Primary Drive Ratios | Spur Gear 1.750 (98/56) | - |
| Transmission / Drive | 5 Speed | - |
| Chassis |
| Frame Type | Steel, twin spar | - |
| Suspension - Front | Telescopic with 3-way preload and damping adjustment | - |
| Suspension - Rear | Monocross monoshock 5-way preload and 5-way damping adjustment | - |
| Wheels & Brakes |
| Brakes - Front | 2x 282mm discs 2 piston caliper | Dual disc |
| Brakes - Rear | Single 282mm disc 2 piston caliper | Single disc |
| Tyres - Front | 120/80 V16 | 110/80-17 |
| Tyres - Rear | 150/80 V16 | 140/80-17 |
Verdict
⚖️
Too close to call
The 1986 Yamaha FJ 1200 and the 1989 Honda CBR 1000F are evenly matched across the key measurable criteria. Your decision comes down to personal preference, riding style, and which brand's dealer network best suits your location.
Key Differences
1986 Yamaha FJ 1200 - Advantages
- ✓Competitive all-round: The 1986 Yamaha FJ 1200 matches or exceeds its rival across all measured criteria.
1989 Honda CBR 1000F - Advantages
- ✓Competitive all-round: The 1989 Honda CBR 1000F matches or exceeds its rival across all measured criteria.
1986 Yamaha FJ 1200 vs 1989 Honda CBR 1000F - FAQs
What are the engine differences between the 1986 Yamaha FJ 1200 and 1989 Honda CBR 1000F?
The 1986 Yamaha FJ 1200 uses Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder., while the 1989 Honda CBR 1000F is powered by In-line four.
Which should I buy, the 1986 Yamaha FJ 1200 or the 1989 Honda CBR 1000F?
Both are strong choices. The 1986 Yamaha FJ 1200 has its own strengths, while the 1989 Honda CBR 1000F offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.