| General |
| Year | 2017 - 18 | 2025 |
| Make Model | KTM 390 Duke | BMW S 1000RR |
| Dimensions |
| Seat Height | 830 mm / 32.7 in | 832 mm / 32.4 in |
| Wheelbase | 1357 mm / 53.4 in | 1457 mm / 57.4 in |
| Ground Clearance | 185 mm / 7.3 in | - |
| Height | - | 1205 mm / 47.4 in |
| Length | - | 2073 mm / 81.6 in |
| Width | - | 848 mm / 33.4 in |
| Weights & Capacities |
| Wet Weight (kg) | - | 198 |
| Dry Weight (kg) | 149 | 176 |
| Dry Weight | 149 kg / 328 lbs | 176 kg / 388 lbs |
| Fuel Capacity | 13.4 L / 3.5 US gal / 2.9 Imp gal | 16.5 Litres / 4.35 US gal |
| Wet Weight | - | 198 kg / 436.5 lbs |
| Performance |
| Max Power | 43.5 hp / 32 kW @ 9500 rpm | 154 kW / 206 hp @ 13700 rpm |
| Max Torque | 3.6 kg-m / 35.3 Nm @7000rpm | 113 Nm / 83.3 lb-ft @ 11000 rpm |
| Engine |
| Displacement | 373 cc / 22.7 cu-in | 999 cc / 60.9 cu-in |
| Engine Detail | Four stroke, single cylinder. DOHC with finger followers, 4 valves | Four stroke, transverse four cylinder, DOHC, valve actuation via single cam followers, BMW ShiftCam variable intake cam control |
| Bore x Stroke | 89 x 60 mm | 80 x 49.7 mm |
| Compression Ratio | 12.6:1 | 13.3:1 |
| Cooling System | Liquid Cooled | Liquid/oil cooled |
| Emissions | - | Closed-loop 3-way catalytic converter, emission standard EU-5 |
| Engine Management | - | BMS-0 | Electronic fuel injection with ride-by-wire throttle system, variable intake, and knock sensor, 48mm throttle body |
| Fuel Induction | Bosch Injection | - |
| Ignition | Bosch EMS | - |
| Lubrication | Wet sump | Wet sump |
| Starter | Electric | Electric |
| Drivetrain |
| Clutch | PASC antihopping clutch, mechanically operated | Multiplate clutch in oil bath, anti-hopping clutch, with self-reinforcement |
| Final Drive | Chain 5/8 x 1/4" X Ring | Chain 525 17/46 |
| Final Drive Ratio | 15:45 | - |
| Gear Ratios | - | 1st: 2.647 / 2nd: 2.091 / 3rd: 1.727 / 4th: 1.500 / 5th: 1.360 / 6th: 1.261 |
| Primary Drive Ratios | 30:80 | - |
| Transmission / Drive | 6 Speed | Claw-shifted 6-speed gearbox with straight cut gears |
| Chassis |
| Frame Type | Steel trellis frame, powder coated | Bridge-type aluminum laminate frame with load-bearing engine |
| Suspension - Front | WP inverted fork ø 43 mm | Upside-down telescopic fork, diameter 45 mm, spring preload, rebound and compression stages adjustable |
| Suspension - Rear | WP monoshock | Aluminium swing arm, full floater pro, compression and rebound damping adjustable, adjustable spring preload |
| Steering Head Angle | 66° | 66.4° |
| Trail | - | 99.8 mm / 3.9 in |
| Wheel Travel - Front | 142 mm / 5.6 in | 120 mm / 4.7 in |
| Wheel Travel - Rear | 150 mm / 5.9 in | 118 mm / 4.6 in |
| Electronics |
| Traction control | - | BMW Motorrad DTC |
| Wheels & Brakes |
| Brakes - Front | Single 320 mm disc, 4 piston radial caliper | 2x 320mm floating disc, radial 4-piston fixed calipers |
| Brakes - Rear | Single 230 mm disc 1 piston caliper | Single 220 mm disk, single-piston floating caliper |
| ABS | Bosch 9MB two-channel ABS | BMW Motorrad Race ABS (partial integral), Brake-Slide-Assist / BMW Motorrad ABS Pro (settings for RAIN, ROAD, DYNAMIC, RACE mode) |
| Rims - Front | - | 3.50 x 17 |
| Rims - Rear | - | 6.00 x 17 |
| Tyres - Front | 110/70 -17 | 120/70 ZR17 |
| Tyres - Rear | 150/60-17 | 190/55 ZR17 (with M wheels: 200/55 ZR17) |
| Wheels | - | Standard die-cast aluminum wheels Optional M forged aluminum or M Carbon wheels |