2014 KTM 125 Duke vs 2017 Yamaha FZ16

Full specifications comparison • 2 motorcycles

Comparing 2 motorcycles
2014 KTM 125 Duke 2014 KTM 125 Duke

Sport

Engine
Four stroke, single cylinder, DOHC, 4 Valves
Power
11.3 kW / 15 hp @ 10500 rpm
Top Speed
N/A
Weight
127 kg / 280 lbs
2017 Yamaha FZ16 2017 Yamaha FZ16

Sport

Engine
Single cylinder, four-stroke
Power
N/A
Top Speed
N/A
Weight
302.0 pounds
Full Specifications
General
Comments-Sold in India.
Year2013 - 14-
Colours-Red
Make ModelKTM 125 Duke-
Dimensions
Ground Clearance (in.)-6.3 inches
Ground Clearance (mm)-160 mm
Seat Height810 mm / 31.8 in800 mm / 31.5 in.
Wheelbase1367 mm / 53.8 in1,335 mm / 52.6 in.
Ground Clearance170 mm / 6.7 in-
Height-1,975 mm / 77.8 in.
Length-1,975 mm / 77.8 in.
Width-1,975 mm / 77.8 in.
Weights & Capacities
Oil Capacity (l)-1.20 litres
Oil Capacity (Quarts)-0.08 quarts
Dry Weight127 kg / 280 lbs126 kg / 277.8 lbs
Fuel Capacity11 Litres / 2.9 US gal / 2.4 Imp gal12.00 litres / 3.17 gallons
Wet Weight-137.0 kg / 302.0 lbs
Performance
Max Power11.3 kW / 15 hp @ 10500 rpm-
Max Torque12 Nm / 1.22 kgf-m / 8.85 ft-lb @ 8000 rpm14.00 Nm (1.4 kgf-m or 10.3 ft.lbs) @ 6000 Revolutions
Engine
Bore x Stroke (in,)-2.3 x 2.3 inches
Displacement (ci)-9.34 cubic inches
Displacement (cc)-153.00 cc
Bore x Stroke (mm)-58.0 x 57.9 mm
Fuel Control-Single Overhead Cams (SOHC)
Engine Type-Single cylinder, four-stroke
Displacement124.7 cc / 7.6 cu-in-
Engine DetailFour stroke, single cylinder, DOHC, 4 Valves-
Fuel System-Carburettor
Bore x Stroke58 x 47 mm-
Compression Ratio14.5:19.5:1
Cooling SystemLiquid cooled-
Engine Lubrication-Wet sump
Fuel InductionElectronic fuel injection-
IgnitionContactless, controlled, fully electronic ignition system with digital ignition timing adjustmentCDI
LubricationForced oil lubrication with 1 Eaton pump-
StarterElectricElectric
Drivetrain
ClutchMulti-disc clutch, operated hydraulicallyConstant mesh wet multiplate
Final DriveChain 5/8 x 1/4" X RingChain
Gearbox-5-speed
Transmission / Drive6 Speed -
Chassis
Frame TypeSpace frame in chrome -molybdenum steel tubes Subframe: steelDiamond
Suspension - Front38 mm WP upside-down forkTelescopic Hydraulic
Suspension - RearWP monoshock.Ajustable, Hydraulic Shock Absorber
Rake-26.0°
Steering Head Angle65°-
Trail-98 mm / 3.9 in.
Wheel Travel - Front160 mm / 6.2 in-
Wheel Travel - Rear160 mm / 6.2 in-
Wheels & Brakes
Brakes - Rear Diameter (in.)-5.1 inches
Brakes - Rear Diameter (mm)-130 mm
Brakes - FrontSingle 280 mm discSingle disc
Brakes - RearSingle 220 mm discExpanding brake (drum brake)
Tyres - Front110/70 -17100/80-17
Tyres - Rear150/60 -17140/60-17

Verdict

Winner on specs

2014 KTM 125 Duke

The 2014 KTM 125 Duke edges out the 2017 Yamaha FZ16 thanks to its liquid cooling, fuel injection and greater ground clearance. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.

Key Differences

2014 KTM 125 Duke - Advantages

  • Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
  • Fuel injection: Precise fuelling, better cold-start reliability, and lower maintenance requirements.
  • More ground clearance: 170 mm vs 160 mm - better clearance over rocks and obstacles.

2017 Yamaha FZ16 - Advantages

  • Competitive all-round: The 2017 Yamaha FZ16 matches or exceeds its rival across all measured criteria.

2014 KTM 125 Duke vs 2017 Yamaha FZ16 - FAQs

What are the engine differences between the 2014 KTM 125 Duke and 2017 Yamaha FZ16?
The 2014 KTM 125 Duke uses Four stroke, single cylinder, DOHC, 4 Valves, while the 2017 Yamaha FZ16 is powered by Single cylinder, four-stroke.
Which should I buy, the 2014 KTM 125 Duke or the 2017 Yamaha FZ16?
Both are strong choices. The 2014 KTM 125 Duke has the edge in liquid cooling and fuel injection, while the 2017 Yamaha FZ16 offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.