2022 Husqvarna TC 50 vs 2018 KTM 50 SX
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | Power reduction kit available. | The engine power can be restricted to 5.5 hp with a kit. |
| Colours | White/blue/yellow | Orange/white/black |
| Warranty | 2 Years | - |
| Dimensions |
| Ground Clearance (mm) | 252 mm | 252 mm |
| Ground Clearance (in.) | 9.9 inches | 9.9 inches |
| Seat Height | 665 mm / 26.2 in. | 684 mm / 26.9 in. |
| Wheelbase | 1032 mm / 40.6 in. | 1,032 mm / 40.6 in. |
| Weights & Capacities |
| Oil Capacity (Quarts) | 0.95 US quarts | - |
| Oil Capacity (l) | 0.90 litres | - |
| Dry Weight | 41.5 kg / 91.5 lbs | 41.5 kg / 91.5 lbs |
| Fuel Capacity | 2.30 litres / 0.61 US gallons | 2.30 litres / 0.61 gallons |
| Engine |
| Engine Type | Single cylinder, two-stroke | Single cylinder, two-stroke |
| Displacement (ci) | 2.99 cubic inches | 2.99 cubic inches |
| Displacement (cc) | 49.0 cc | 49.00 cc |
| Bore x Stroke (in,) | 1.6 x 1.6 inches | 1.6 x 1.6 inches |
| Bore x Stroke (mm) | 39.5 x 40.0 mm | 39.5 x 40.0 mm |
| Engine Detail | Reed valve | Reed intake |
| Fuel System | - | Carburettor. Mikuni TMX |
| Engine Lubrication | Mixture oil lubrication | Mixture oil lubrication |
| Ignition | Seletra 2p D36 | Seletra 2p D36 |
| Starter | Kick | Kick |
| Drivetrain |
| Clutch | Centrifugal clutch (adjustable) | Centrifugal clutch |
| Final Drive | Chain (final drive) | Chain |
| Gearbox | Automatic | 1-speed |
| Primary Drive | Single-speed automatic. | - |
| Chassis |
| Frame Type | Chrome-molybdenum steel central-tube | Central-tube frame with double-cradle |
| Suspension - Front | XACT 35 WP Upside-Down fork, Ø 35 mm | WP upside-down ? 35 mm |
| Suspension - Rear | XACT WP mono shock | WP shock absorber |
| Rake | 24.0° | 24.0° |
| Wheel Travel - Front | 205 mm / 8.1 in. | 205 mm / 8.1 in. |
| Wheel Travel - Rear | 185 mm / 7.3 in. | 185 mm / 7.3 in. |
| Wheels & Brakes |
| Brakes - Rear Diameter (in.) | - | 6.3 inches |
| Brakes - Front Diameter (in.) | - | 6.3 inches |
| Brakes - Front Diameter (mm) | - | 160 mm |
| Brakes - Rear Diameter (mm) | - | 160 mm |
| Brakes - Front | Single disc. Hydraulic, wave disk | Single disc. Four-piston calipers. |
| Brakes - Rear | Single disc. Hydraulic, wave disk | Single disc. Two-piston calipers. |
| Rims | Black anodised, aluminium rims. Maxxis tyres. | Wire spoked |
Verdict
🏆
Winner on specs
2022 Husqvarna TC 50
The 2022 Husqvarna TC 50 edges out the 2018 KTM 50 SX thanks to its lower seat height. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2022 Husqvarna TC 50 - Advantages
- 📏Lower seat height: 665 mm vs 684 mm - accessible to a wider range of rider heights.
2018 KTM 50 SX - Advantages
- ✓Competitive all-round: The 2018 KTM 50 SX matches or exceeds its rival across all measured criteria.
2022 Husqvarna TC 50 vs 2018 KTM 50 SX - FAQs
Which bike is better for shorter riders, the 2022 Husqvarna TC 50 or the 2018 KTM 50 SX?
The 2022 Husqvarna TC 50 has the lower seat at 665 mm, making it more accessible. The 2018 KTM 50 SX sits higher at 684 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2022 Husqvarna TC 50 or the 2018 KTM 50 SX?
Both are strong choices. The 2022 Husqvarna TC 50 has the edge in lower seat height, while the 2018 KTM 50 SX offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.