2020 Husqvarna FC250 vs 2022 KTM 250 SX
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Colours | White/yellow/blue | Orange/white/blue |
| Dimensions |
| Ground Clearance (in.) | 14.6 inches | 14.8 inches |
| Ground Clearance (mm) | 370 mm | 375 mm |
| Seat Height | 950 mm / 37.4 in. | 850 mm / 33.5 in. |
| Wheelbase | 1482 mm / 58.3 in. | 1495 mm / 58.9 in. |
| Length | 2260 mm / 89.0 in. | - |
| Weights & Capacities |
| Dry Weight | 99.5 kg / 219.4 lbs | 95.5 kg / 210.5 lbs |
| Fuel Capacity | 7.00 litres / 1.85 US gallons | 7.50 litres / 1.98 US gallons |
| Performance |
| Power-to-Weight Ratio | 0.4623 HP/kg | - |
| Engine |
| Bore x Stroke (in,) | 3.1 x 2.1 inches | 2.6 x 2.8 inches |
| Bore x Stroke (mm) | 78.0 x 52.3 mm | 66.4 x 72.0 mm |
| Displacement (cc) | 249.9 cc | 249.0 cc |
| Displacement (ci) | 15.25 cubic inches | 15.19 cubic inches |
| Engine Type | Single cylinder, four-stroke | Single cylinder, two-stroke |
| Fuel Control | Double Overhead Cams/Twin Cam (DOHC) | - |
| Engine Detail | - | Reed intake |
| Fuel System | Carburettor | Carburettor. Mikuni TMX. |
| Ignition | Keihin EMS | Kokusan EMS. |
| Starter | Electric | Kick |
| Drivetrain |
| Clutch | Wet, multi-disc clutch, Magura hydraulics | Wet, DDS multi-disc clutch, Brembo hydraulics |
| Final Drive | Chain (final drive) | Chain (final drive) |
| Gearbox | 5-speed | 5-speed |
| Primary Drive | - | 5/8 x 1/4´ chain. |
| Chassis |
| Frame Type | 25CrMo4 steel central-tube | Central double-cradle-type 25CrMo4 steel |
| Suspension - Front | WP-USD, AER 48, Ø 48 mm | WP XACT-USD, Ø 48 mm |
| Suspension - Rear | WP Monoshock with linkage | WP XACT Monoshock with linkage |
| Rake | 26.1° | 26.1° |
| Wheel Travel - Front | 310 mm / 12.2 in. | 310 mm / 12.2 in. |
| Wheel Travel - Rear | 300 mm / 11.8 in. | 300 mm / 11.8 in. |
| Wheels & Brakes |
| Brakes - Front | Single disc. Brembo twin-piston floating calliper | Single disc |
| Brakes - Rear | Single disc. Brembo single-piston floating calliper | Single disc |
| Rims | - | CNC machined hubs. Excel rims. Wire spoked. Dunlop Geomax MX 3S tires. |
| Tyres - Front | 90/90-21 | 80/100-21 |
Verdict
🏆
Winner on specs
2022 KTM 250 SX
The 2022 KTM 250 SX edges out the 2020 Husqvarna FC250 thanks to its lower seat height. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2020 Husqvarna FC250 - Advantages
- ✓Competitive all-round: The 2020 Husqvarna FC250 matches or exceeds its rival across all measured criteria.
2022 KTM 250 SX - Advantages
- 📏Lower seat height: 850 mm vs 950 mm - accessible to a wider range of rider heights.
2020 Husqvarna FC250 vs 2022 KTM 250 SX - FAQs
What are the engine differences between the 2020 Husqvarna FC250 and 2022 KTM 250 SX?
The 2020 Husqvarna FC250 uses Single cylinder, four-stroke, while the 2022 KTM 250 SX is powered by Single cylinder, two-stroke. This is a fundamental difference - the 2020 Husqvarna FC250 is a four-stroke engine while the 2022 KTM 250 SX runs a two-stroke, resulting in very different power delivery, maintenance requirements, and riding character.
Which bike is better for shorter riders, the 2020 Husqvarna FC250 or the 2022 KTM 250 SX?
The 2022 KTM 250 SX has the lower seat at 850 mm, making it more accessible. The 2020 Husqvarna FC250 sits higher at 950 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2020 Husqvarna FC250 or the 2022 KTM 250 SX?
Both are strong choices. The 2020 Husqvarna FC250 has its own strengths, while the 2022 KTM 250 SX stands out for lower seat height. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.