2022 Honda NC750X vs 2023 KTM 890 SMT

Full specifications comparison • 2 motorcycles

Comparing 2 motorcycles
2022 Honda NC750X 2022 Honda NC750X

Super motard

Engine
Twin, four-stroke
Power
N/A
Top Speed
N/A
Weight
471.8 pounds
2023 KTM 890 SMT 2023 KTM 890 SMT

Super motard

Engine
Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder
Power
104 hp / 77 kW @ 8000 rpm
Top Speed
N/A
Weight
194 kg / 427.7 lbs
Full Specifications
General
CommentsThrottle By Wire. Model id NC750XA.-
Year-2023
ColoursGrand Prix Red-
Make Model-KTM 890 SMT
WarrantyOne year transferable, unlimited-mileage limited warranty.-
Dimensions
Storage22-liter utility compartment-
Ground Clearance (in.)5.7 inches-
Ground Clearance (mm)145 mm-
Seat Height803 mm / 31.6 in.860 mm / 33.9 in
Wheelbase1527 mm / 60.1 in.1502 mm / 59.1 in
Ground Clearance-227 mm / 8.9 in
Height1330 mm / 52.4 in.-
Length2210 mm / 87.0 in.-
Width846 mm / 33.3 in.-
Weights & Capacities
Oil Capacity (Quarts)4.23 US quarts-
Oil Capacity (l)4.00 litres-
Dry Weight-194 kg / 427.7 lbs
Fuel Capacity14.38 litres / 3.80 US gallons15.8 Litres / 4.2 US gal
Wet Weight214.0 kg / 471.8 lbs-
Performance
Max Power-104 hp / 77 kW @ 8000 rpm
Max Torque69.0 Nm (7.0 kgf-m or 50.9 ft.lbs) @ 4750 Revolutions"-
Engine
Fuel ControlSingle Overhead Cams (SOHC)-
Displacement (cc)745.0 cc-
Bore x Stroke (in,)3.0 x 3.1 inches-
Bore x Stroke (mm)77.0 x 80.0 mm-
CO281.2 CO2 g/km. (CO2 - Carbon dioxide emission)-
Displacement (ci)45.46 cubic inches-
Engine TypeTwin, four-stroke-
Displacement-889 cc / 54.2 cu-in
Engine Detail-Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder
Fuel SystemInjection. PGM-FI electronic fuel injection-
Bore x Stroke-90.7 x 68.8 mm
Compression Ratio10.7:113.5:1
Cooling System-Liquid cooled with water/oil heat exchanger
EmissionsMeets current EPA standards. California version meets current CARB standards.EURO5
Engine Management-Bosch EMS with RBW
Fuel Consumption3.50 litres/100 km (28.6 km/l or 67.21 mpg)-
Fuel Induction-DKK Dell'Orto fuel-Injection throttle body 46mm
IgnitionComputer controlled digital transistorised with electronic advance-
Lubrication-Forced oil lubrication with 2 oil pumps
StarterElectricElectric
Valve System4-
Drivetrain
ClutchMultiplate wetPASC antihopping clutch, mechanically operated
Final DriveChain   (final drive)Chain 520 X-Ring
Gearbox6-speed-
Sprocket16/43 (front/rear)-
Transmission / Drive-6 Speed
Chassis
Frame TypeDiamond; steel pipeChromium-Molybdenum-Steel frame using the engine as stressed element, powder coated
Suspension - FrontShowa 41mm telescopic fork43mm WP APEX upside-down forks
Suspension - RearMonoshock damper, Pro-Link swingarmWP APEX Monoshock
Rake27.0°24.3°
Steering Head Angle-64.21°
Trail110 mm / 4.3 in.-
Wheel Travel - Front120 mm / 4.7 in.180 mm / 7.1 in
Wheel Travel - Rear120 mm / 4.7 in.180 mm / 7.1 in
Electronics
Traction control-Three mode, disengageable, lean sensitive, optional
Electrical Systems
Lighting systemLED lights front and rear-
Wheels & Brakes
Brakes - FrontSingle disc. ABS. Hydraulic. Two-piston calipers.2 x 320mm discs, 4 piston, radially mounted caliper
Brakes - RearSingle disc. ABS. Hydraulic. Single-piston caliper.Single 260mm disc, 1 piston floating caliper
ABS-Bosch 9.1 MP (incl. Cornering ABS and Supermoto mode)
RimsMulti-Spoke Aluminium Cast-
Tyres - Front120/70-ZR17120/70 ZR 17
Tyres - Rear-180/55 ZR 17
Wheels - Front-Cast aluminium wheels 3.50 X 17
Wheels - Rear-Cast aluminium wheels 5.50 X 17

Verdict

Winner on specs

2023 KTM 890 SMT

The 2023 KTM 890 SMT edges out the 2022 Honda NC750X thanks to its liquid cooling, standard ABS, dual front discs, greater ground clearance, higher rear wheel travel and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.

Key Differences

2022 Honda NC750X - Advantages

  • Lower seat height: 803 mm vs 860 mm - accessible to a wider range of rider heights.

2023 KTM 890 SMT - Advantages

  • Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
  • Standard ABS: A meaningful safety advantage in emergency braking on wet or loose surfaces.
  • Dual front discs: Greater stopping power and better heat management under hard braking.
  • More ground clearance: 227 mm vs 145 mm - better clearance over rocks and obstacles.
  • More rear wheel travel: 180 mm vs 120 mm - absorbs bigger hits and rough terrain better.
  • More front wheel travel: 180 mm vs 120 mm - greater compliance over rough surfaces.

2022 Honda NC750X vs 2023 KTM 890 SMT - FAQs

What are the engine differences between the 2022 Honda NC750X and 2023 KTM 890 SMT?
The 2022 Honda NC750X uses Twin, four-stroke, while the 2023 KTM 890 SMT is powered by Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder.
Which bike is better for shorter riders, the 2022 Honda NC750X or the 2023 KTM 890 SMT?
The 2022 Honda NC750X has the lower seat at 803 mm, making it more accessible. The 2023 KTM 890 SMT sits higher at 860 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Does the 2022 Honda NC750X or 2023 KTM 890 SMT have ABS?
The 2023 KTM 890 SMT is listed with ABS as standard. The 2022 Honda NC750X does not list ABS. ABS provides a meaningful safety benefit in emergency braking on wet or loose surfaces.
Which should I buy, the 2022 Honda NC750X or the 2023 KTM 890 SMT?
Both are strong choices. The 2022 Honda NC750X has the edge in lower seat height, while the 2023 KTM 890 SMT stands out for liquid cooling and standard ABS. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.