2016 Honda NC750X vs 2020 KTM 690 SMC R

Full specifications comparison • 2 motorcycles

Comparing 2 motorcycles
2016 Honda NC750X 2016 Honda NC750X

Super motard

Engine
Twin, four-stroke
Power
N/A
Top Speed
N/A
Weight
482.8 pounds
2020 KTM 690 SMC R 2020 KTM 690 SMC R

Super motard

Engine
Single cylinder, 4-stroke, SOHC, 4-valve
Power
72 hp / 54 kW @
Top Speed
N/A
Weight
147 kg / 324 lbs
Full Specifications
General
Year-2020
ColoursBlack, Red, white, grey-
Make Model-KTM 690 SMC R
Dimensions
Ground Clearance (in.)6.5 inches-
Ground Clearance (mm)165 mm-
Seat Height830 mm / 32.7 in.890 mm / 35.0 in
Wheelbase1,540 mm / 60.6 in.1470 mm / 57.8 in
Ground Clearance-238 mm / 9.3 in
Height1,285 mm / 50.6 in.-
Length2,210 mm / 87.0 in.-
Width840 mm / 33.1 in.-
Weights & Capacities
Oil Capacity (Quarts)0.24 quarts-
Oil Capacity (l)3.70 litres-
Dry Weight-147 kg / 324 lbs
Fuel Capacity14.10 litres / 3.73 gallons13.5 Litres / 3.5 US gal
Wet Weight219.0 kg / 482.8 lbs-
Performance
Max Power-72 hp / 54 kW @
Max Torque68.00 Nm (6.9 kgf-m or 50.2 ft.lbs) @ 4750 Revolutions73.5 Nm / 54 lb-ft @ 6500 rpm
Engine
Displacement (cc)745.00 cc-
Bore x Stroke (in,)3.0 x 3.1 inches-
Bore x Stroke (mm)77.0 x 80.0 mm-
Engine TypeTwin, four-stroke-
Displacement (ci)45.46 cubic inches-
Displacement-690 cc / 42.1 cu in
Engine Detail-Single cylinder, 4-stroke, SOHC, 4-valve
Fuel SystemInjection-
Bore x Stroke-105 x 80 mm
Compression Ratio10.7:112.7:1
Cooling System-Liquid cooled
Exhaust-Stainless steel primary and secondary silencer
Fuel Induction-Keihin EFI (throttle body 50 mm)
IgnitionABSKeihin EMS with RBW, double ignition
Lubrication System-Pressure lubrication with 2 oil pumps
StarterElectricElectric
EV Specifics
Battery Capacity-Lithium Ion 12V 8,6Ah
Drivetrain
ClutchWet multiplate hydraulic clutch (DCT:Wet multiplate hydraulic 2-clutch)PASC slipper clutch, hydraulically operated
Final DriveChainChain, X-Ring 5/8 " 1/4 in
Gearbox6-speed-
Primary Drive-36:79
Transmission / Drive-6-Speed
Chassis
Frame TypeDiamond; steel pipeChromium-molybdenum-steel trellis frame, powder coated
Suspension - FrontShowa “dual-bending valve” front forkWP USD XPLOR 48 forks
Suspension - RearMonoshock damper, Pro-Link swingarmWP shock absorber with Pro-Lever linkage
Handlebar-Aluminum, tapered, Ø 28 / 22 mm
Rake27.0°-
Steering Head Angle-63.6°
Subframe-Self-supporting plastic tank
Trail110 mm / 4.3 in.107.7 mm / 4.2 in
Wheel Travel - Front-215 mm / 8.4 in
Wheel Travel - Rear-240 mm / 9.4 in
Electrical Systems
Lighting systemLED lights front and rear-
Wheels & Brakes
Brakes - Front Diameter (in.)12.6 inches-
Brakes - Rear Diameter (mm)240 mm-
Brakes - Rear Diameter (in.)9.4 inches-
Brakes - Front Diameter (mm)320 mm-
Brakes - FrontSingle disc. Hydraulic. Two-piston calipers.Single 320mm disc, Brembo 4 piston floating caliper
Brakes - RearSingle disc. Hydraulic. Single-piston caliper.Single 240 mm disc, Brembo single piston floating caliper
ABS-Bosch 9.1 MP (incl. Cornering ABS and offroad mode, disengageable)
Rims17M/C x MT4.50-
Tyres - Front120/70-ZR17120/70 ZR 17
Tyres - Rear160/60-ZR17160/60 ZR 17
Wheels - Front-Spoked wheels with aluminum tubeless rims 3.50 x 17″;
Wheels - Rear-Spoked wheels with aluminum tubeless rims 5.00 x 17″

Verdict

Winner on specs

2020 KTM 690 SMC R

The 2020 KTM 690 SMC R edges out the 2016 Honda NC750X thanks to its liquid cooling, standard ABS and greater ground clearance. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.

Key Differences

2016 Honda NC750X - Advantages

  • Lower seat height: 830 mm vs 890 mm - accessible to a wider range of rider heights.

2020 KTM 690 SMC R - Advantages

  • Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
  • Standard ABS: A meaningful safety advantage in emergency braking on wet or loose surfaces.
  • More ground clearance: 238 mm vs 165 mm - better clearance over rocks and obstacles.

2016 Honda NC750X vs 2020 KTM 690 SMC R - FAQs

What are the engine differences between the 2016 Honda NC750X and 2020 KTM 690 SMC R?
The 2016 Honda NC750X uses Twin, four-stroke, while the 2020 KTM 690 SMC R is powered by Single cylinder, 4-stroke, SOHC, 4-valve.
Which bike is better for shorter riders, the 2016 Honda NC750X or the 2020 KTM 690 SMC R?
The 2016 Honda NC750X has the lower seat at 830 mm, making it more accessible. The 2020 KTM 690 SMC R sits higher at 890 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Does the 2016 Honda NC750X or 2020 KTM 690 SMC R have ABS?
The 2020 KTM 690 SMC R is listed with ABS as standard. The 2016 Honda NC750X does not list ABS. ABS provides a meaningful safety benefit in emergency braking on wet or loose surfaces.
Which should I buy, the 2016 Honda NC750X or the 2020 KTM 690 SMC R?
Both are strong choices. The 2016 Honda NC750X has the edge in lower seat height, while the 2020 KTM 690 SMC R stands out for liquid cooling and standard ABS. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.